Andrew Cameron cad4132e00 ath79: add support for TP-Link CPE510-v2/v3 ... TP-Link CPE510-v2/v3 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - Based on the same underlying hardware as the TP-Link CPE510 - Power, LAN, and 4 green LEDs - 1 10/100Mbps Shielded Ethernet Port (Passive PoE in) - Built-in 13dBi 2x2 dual-polarized directional MIMO antenna - Adjustable transmission power from 0 to 23dBm/200mw Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net> [whitespace fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz>		2019-07-18 00:06:55 +02:00
..
base-files	ath79: add support for TP-Link CPE510-v2/v3	2019-07-18 00:06:55 +02:00
dts	ath79: add support for TP-Link CPE510-v2/v3	2019-07-18 00:06:55 +02:00
files	ath79: support "rgmii-id" PHY mode in ag71xx	2019-07-17 22:59:29 +02:00
generic	ath79: widen RedBoot directory search and add PHY	2019-07-17 22:59:29 +02:00
image	ath79: add support for TP-Link CPE510-v2/v3	2019-07-18 00:06:55 +02:00
nand	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.127	2019-06-18 14:47:53 +02:00
patches-4.19	kernel: bump 4.19 to 4.19.52	2019-06-18 14:47:53 +02:00
tiny	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
config-4.14	ath79: add support for D-Link DIR-859 A1	2018-12-30 20:08:13 +01:00
config-4.19	ath79: add support for Qihoo C301	2019-07-16 09:51:03 +08:00
Makefile	treewide: kernel: bump some targets to 4.19	2019-06-18 16:08:55 +02:00
modules.mk