1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 14:08:17 +02:00
openwrt/target/linux/generic/pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
Hauke Mehrtens 9261e7447e kernel: Make the patches apply on top of 4.19
This makes the patches which were just copied in the previous commit
apply on top of kernel 4.19.

The patches in the backports-4.19 folder were checked if they are really
in kernel 4.19 based on the title and only removed if they were found in
the upstream kernel.

The following additional patches form the pending folder went into
upstream Linux 4.19:
pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch
pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch
pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch
pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch
pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch

Bigger changes were introduced to the m25p80 spi nor driver, as far as I
saw it in the new code, it now has the functionality provided in this
patch:
pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch

Part of this patch went upstream independent of OpenWrt:
hack-4.19/220-gc_sections.patch
This patch was reworked to match the changes done upstream.

The MIPS DMA API changed a lot, this patch was rewritten to match the
new DMA handling:
pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch

I did bigger manual changes to the following patches and I am not 100% sure if they are all correct:
pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
pending-4.19/411-mtd-partial_eraseblock_write.patch
pending-4.19/600-netfilter_conntrack_flush.patch
pending-4.19/611-netfilter_match_bypass_default_table.patch
pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
hack-4.19/211-host_tools_portability.patch
hack-4.19/221-module_exports.patch
hack-4.19/321-powerpc_crtsavres_prereq.patch
hack-4.19/902-debloat_proc.patch

This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:48 +01:00

27 lines
924 B
Diff

From d9c8bc8c1408f3e8529db6e4e04017b4c579c342 Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Sun, 18 Feb 2018 17:08:04 +0100
Subject: [PATCH] w1: gpio: fix problem with platfom data in w1-gpio
In devices, where fdt is used, is impossible to apply platform data
without proper fdt node.
This patch allow to use platform data in devices with fdt.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
drivers/w1/masters/w1-gpio.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -79,7 +79,7 @@ static int w1_gpio_probe(struct platform
enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
int err;
- if (of_have_populated_dt()) {
+ if (of_have_populated_dt() && !dev_get_platdata(&pdev->dev)) {
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;