1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 14:08:17 +02:00
openwrt/target/linux/ath79/dts/ar7241_ubnt_unifi.dts
Dmitry Tunin 7a873974f7 ath79: add support for indicating the boot state using multiple leds
Use diag.sh version used for apm821xx, ipq40xx and ipq806x, which
supports different leds for the different boot states.

The existing led sequences should be the same as before.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
[reword commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-15 07:42:36 +02:00

129 lines
1.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241.dtsi"
/ {
compatible = "ubnt,unifi", "qca,ar7241";
model = "Ubiquiti UniFi AP";
aliases {
led-boot = &dome_green;
led-failsafe = &dome_green;
led-running = &dome_green;
led-upgrade = &dome_green;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
dome_green: dome-green {
label = "ubnt:green:dome";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
dome-orange {
label = "ubnt:orange:dome";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
label = "firmware";
reg = <0x050000 0x750000>;
};
partition@3 {
label = "board_config";
reg = <0x7a0000 0x010000>;
read-only;
};
partition@4 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
art: partition@5 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};