Andrey Bondar ba59021d64 ath79: add support for 8devices Lima board ... Specification: • 650/600/216 MHz (CPU/DDR/AHB) • 64 MB of RAM (DDR2) • 32 MB of FLASH • 2T2R 2.4 GHz • 2x 10/100 Mbps Ethernet • 1x USB 2.0 Host socket • 1x miniPCIe slot • UART for serial console • 14x GPIO Flash instructions: Upgrading from ar71xx target: • Upload image into the board: scp openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin root@192.168.1.1/tmp/ • Run sysupgrade sysupgrade -F /tmp/openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin Upgrading from u-boot: • Set up tftp server with openwrt-ath79-generic-8dev_lima-initramfs-kernel.bin • Go to u-boot (reboot and press ESC when prompted) • Set TFTP server IP setenv serverip 192.168.1.254 • Set device ip from the same subnet setenv ipaddr 192.168.1.1 • Copy new firmware to board tftpboot 0x82000000 initramfs.bin • Boot OpenWRT bootm 0x82000000 • Upload image openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin into the board • Run sysupgrade. Signed-off-by: Andrey Bondar <a.bondar@8devices.com>		2020-07-08 16:07:05 +02:00
..
apm821xx
ar71xx	ar71xx: Fix mikrotik NAND compile problem	2020-07-07 23:38:10 +02:00
arc770
archs38
armvirt
at91
ath25
ath79	ath79: add support for 8devices Lima board	2020-07-08 16:07:05 +02:00
bcm27xx
bcm47xx
bcm53xx
bcm63xx
cns3xxx
gemini
generic	generic: platform/mikrotik: add partial AR71xx cpufreq support	2020-07-08 16:07:05 +02:00
imx6
ipq40xx	ipq40xx: add support for GL.iNet GL-S1300	2020-07-08 16:07:05 +02:00
ipq806x
ipq807x
kirkwood
lantiq	lantiq: set port numbers corresponding to reg value	2020-07-07 01:03:59 +02:00
layerscape
malta
mediatek
mpc85xx
mvebu
mxs
octeon
octeontx
omap
oxnas
pistachio
ramips	ramips: Add support for Xiaomi Mi Router(Black,R2100)	2020-07-08 16:07:05 +02:00
rb532
rockchip
samsung
sunxi
tegra
uml
x86
zynq
Makefile	build: add 'make kernel_xconfig' command	2020-07-08 16:07:05 +02:00