mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-10-22 07:31:37 +02:00
b6a4c67468
This commit adds support for the AVM Fritz!Box 4020 WiFi-router. SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz RAM: Winbond W971GG6KB-25 FLASH: Macronix MX25L12835F WiFi: QCA9561 b/g/n 3x3 450Mbit/s USB: 1x USB 2.0 IN: WPS button, WiFi button OUT: Power LED green, Internet LED green, WLAN LED green, LAN LED green, INFO LED green, INFO LED red UART: Header Next to Black metal shield Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet (LAN + WAN) - WiFi (correct MAC) - Installation via EVA bootloader - OpenWRT sysupgrade - Buttons - LEDs Not working: - USB port Installation via EVA: In the first seconds after Power is connected, the bootloader will listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded like following: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put openwrt-sysupgrade.bin mtd1 Note that this procedure might take up to two minutes. After transfer is complete you need to powercycle the device to boot OpenWRT. Signed-off-by: David Bauer <mail@david-bauer.net> |
||
---|---|---|
.. | ||
adm5120 | ||
adm8668 | ||
apm821xx | ||
ar7 | ||
ar71xx | ||
arc770 | ||
archs38 | ||
armvirt | ||
at91 | ||
ath25 | ||
ath79 | ||
au1000 | ||
bcm53xx | ||
brcm47xx | ||
brcm63xx | ||
brcm2708 | ||
cns3xxx | ||
gemini | ||
generic | ||
imx6 | ||
ipq40xx | ||
ipq806x | ||
ixp4xx | ||
kirkwood | ||
lantiq | ||
layerscape | ||
malta | ||
mcs814x | ||
mediatek | ||
mpc85xx | ||
mvebu | ||
mxs | ||
octeon | ||
octeontx | ||
omap | ||
omap24xx | ||
orion | ||
oxnas | ||
pistachio | ||
ppc40x | ||
ppc44x | ||
ramips | ||
rb532 | ||
sunxi | ||
uml | ||
x86 | ||
xburst | ||
zynq | ||
Makefile |