mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-20 14:38:20 +02:00
Code Issues
b59d5c8f0e
openwrt/target/linux/ath79
History
Peng Zhang 5666ca913a ath79: add support for Qxwlan E750A v4 
Qxwlan E750A v4 is based on Qualcomm QCA9344.

Specification:

 - 560/450/225 MHz (CPU/DDR/AHB)
 - 128 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 2T2R 5G GHz (AR9344)
 - 2x 10/100 Mbps Ethernet (one port with PoE support)
 - 1x miniPCIe slot (USB 2.0 bus only)
 - 7x LED (6 driven by GPIO)
 - 1x button (reset)
 - 1x DC jack for main power input (9-48 V)
 - UART (J23) and LEDs (J2) headers on PCB

Flash instruction:

   1.Using tftp mode with UART connection and original LEDE image
      - Configure PC with static IP 192.168.1.10 and tftp server.
      - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
        to "firmware.bin" and place it in tftp server directory.
      - Connect PC with one of LAN ports, power up the router and press
        key "Enter" to access U-Boot CLI.
      - Use the following commands to update the device to LEDE:
        run lfw
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

   2.Using httpd mode with Web UI connection and original LEDE image
      - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
      - Connect PC with one of LAN ports,press the reset button, power up
        the router and keep button pressed for around 6-7 seconds, until
        leds flashing.
      - Open your browser and enter 192.168.1.1,You will see the upgrade
        interface, select "openwrt-ar71xx-generic-xxx-squashfs-
        sysupgrade.bin" and click the upgrade button.
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

Signed-off-by: Peng Zhang <sd20@qxwlan.com>
[cut out of bigger patch, alter use of DEVICE_VARIANT, merge case
in 01_leds, use lower case for v4]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-15 18:52:39 +02:00
..
base-files/etc/hotplug.d/ieee80211 ath79: add WiFi migration for AR913x 2020-09-28 16:23:03 +02:00
dts ath79: add support for Qxwlan E750A v4 2020-10-15 18:52:39 +02:00
files kernel: Update kernel 4.19 to version 4.19.131 2020-07-04 21:12:42 +02:00
generic ath79: add support for Qxwlan E750A v4 2020-10-15 18:52:39 +02:00
image ath79: add support for Qxwlan E750A v4 2020-10-15 18:52:39 +02:00
mikrotik ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
nand ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
patches-4.19 kernel: Update kernel 4.19 to version 4.19.138 2020-08-10 19:34:37 +02:00
patches-5.4 ath79: ar8216: make switch register access atomic 2020-09-30 15:56:05 +08:00
tiny ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
config-4.19 ath79: enable elf mtd splitter 2020-09-09 20:41:50 +03:00
config-5.4 ath79: enable elf mtd splitter 2020-09-09 20:41:50 +03:00
Makefile ath79: enable usbgadget feature 2020-09-28 01:28:37 +02:00
modules.mk