Paul Wassi b23b0fb28b ar71xx: add support for TP-Link TL-WR810N v2 ... TP-Link TL-WR810N v2 is a compact Wi-Fi router with two Ethernet ports. Specification: - QCA9533 (650 MHz) - 32 MB RAM - 8 MB Flash - 300 Mbps Wi-Fi 2.4 GHz - 2x 10/100 Mbps Ethernet (eth0, eth1) - UART on testpads on PCB - 1x LED (GPIO-controlled) - 1x reset/WPS button - 1x slide-switch with 2 GPIO inputs Flash instructions: - Flash as regular firmware update in Web UI - Default: 192.168.0.254 / admin / admin - Select *-factory.bin When holding reset button during power-up, U-Boot requests a file 'wr810nv1_tp_recovery.bin' from TFTP server at 192.168.0.66 Signed-off-by: Paul Wassi <p.wassi@gmx.at>		2017-11-14 22:36:46 +01:00
..
imagebuilder	imagebuilder: don't rewrite package list output	2017-06-17 01:24:43 +02:00
linux	ar71xx: add support for TP-Link TL-WR810N v2	2017-11-14 22:36:46 +01:00
sdk	build: get rid of host.mk	2017-02-26 13:31:44 +01:00
toolchain	build: get rid of host.mk	2017-02-26 13:31:44 +01:00
Config.in	config: set ARCH if powerpc64 is selected in the configuration	2017-10-24 13:24:04 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00