openwrt

mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-01 08:31:19 +02:00

OpenWrt Source Repository https://openwrt.org/

Go to file

Florian Fainelli ac0b6ee559 fallback to "dumb switch" mode if no PHY was detected This will enable the second Ethernet MAC in most cases, but will allow previously non working devices to work. SVN-Revision: 20022		2010-03-06 22:33:25 +00:00
docs
include
package	add some missing patches to acx-mac80211 it now builds the pci module as well	2010-03-06 22:33:13 +00:00
scripts
target	fallback to "dumb switch" mode if no PHY was detected	2010-03-06 22:33:25 +00:00
toolchain	gcc: only enable/disable TLS support in final stage (closes : #6788 )	2010-03-06 17:10:45 +00:00
tools
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	there are quite a lot of package using ln -sf in their Makefile, so this patch adds	2010-03-05 20:26:14 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org