Zoltan HERPAI 8619d7af67 kirkwood: add D-Link DNS-320L support ... Dual-slot NAS based on Marvell Kirkwood. Specifications: - Marvell 88F6702 @1GHz - 256Mb RAM - 128Mb NAND - 1x GbE LAN (Marvell 88E1318R) - 1x USB 2.0 - 2x SATA - Weltrend WT69P3 ("supervisor" MCU chip) - Serial on J2 (115200,8n1) - Newer bootROM so kwboot-ing via serial is possible Notes: - The Weltrend MCU is controlled by the package added in utils/dns320l-mcu. - The original MAC address is stored in the "mini firmware" image's first 17 bytes. - Compared to the original MTD layout, the uImage+rootfs are now stored in a common ubi partition. Installation: 1. Serial console - Connect your levelshifter to the serial console on J2 (refer to the wiki page for pinout) 2. Update u-boot - Download the u-boot.kwb image for the device - Powercycle the NAS - Run "kwboot -b u-boot-dns320l/u-boot.kwb /dev/ttyUSB0 -p" - Connect to the serial console with minicom - tftp 0x0800000 u-boot-dns320l/u-boot.kwb (Please note that "PHY reset timed out" seems to be customary on kirkwood devices, the egiga0 interface works regardless.) - nand erase 0x0 100000 - nand write 0x0800000 0x0 0x100000 - reset 3. Install OpenWrt - Boot up the initramfs image - tftpboot 0x800000 openwrt-kirkwood-generic-dlink_dns320l-initramfs-uImage; bootm 0x800000 - Download the sysupgrade image and perform sysupgrade Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>		2024-06-01 01:29:09 +02:00
..
patches	kirkwood: add D-Link DNS-320L support	2024-06-01 01:29:09 +02:00
Makefile	kirkwood: add D-Link DNS-320L support	2024-06-01 01:29:09 +02:00