mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-10-19 14:08:17 +02:00
1e4ee63cc8
This patch adds support for TP-Link Archer A7
Specification:
- SOC: QCA9563
- Flash: 16 MiB (SPI)
- RAM: 128 MiB (DDR2)
- Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
- 2.4GHz (bgn) SoC internal
- 5GHz (ac) QCA988x
- USB: 1x USB 2.0 port
- Button: 1x power, 1x reset, 1x wps
- LED: 10x LEDs
- UART: holes in PCB
- Vcc, GND, RX, TX from ethernet port side
- 115200n8
Flash instructions:
Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin
via the Webinterface.
Flash instruction using tftp recovery:
1. Connect the computer to one of the LAN ports of the Archer A7
2. Set the computer IP to 192.168.0.66
3. Start a tftp server with the OpenWrt factory image in the tftp
root directory renamed to ArcherC7v5_tp_recovery.bin
2. Connect power cable to Archer A7, press and hold the reset button
and turn the router on
3. Keep the reset button pressed for ~5 seconds
4. Wait ~150 seconds to complete flashing
Changes since first revision:
- Flash instructions using stock image webinterface
- Changed "Version 5" in model string to "v5"
- Split DTS file in qca9563_tplink_archer-x7-v5.dtsi
and qca9563_tplink_archer-a7-v5.dts
- Firmware image is now build with dynamic partitioning
- Default to ath10k-ct
Changes since second revision:
- Changed uboot@0 to uboot@20000 in DTS file
- Fixed ordering issue in board led script
- Specify firmware partition format in DTS file
- Rebased Makefile device definition on common
Device/tplink-safeloader-uimage definition
- Merged switch section in network script
(same configuration as tplink,tl-wdr3600
and tplink,tl-wdr4300)
Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de>
51 lines
820 B
Plaintext
51 lines
820 B
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/dts-v1/;
|
|
|
|
#include "qca9563_tplink_archer-x7-v5.dtsi"
|
|
|
|
/ {
|
|
compatible = "tplink,archer-a7-v5", "qca,qca9563";
|
|
model = "TP-Link Archer A7 v5";
|
|
};
|
|
|
|
&mtdparts {
|
|
factory-uboot@0 {
|
|
label = "factory-uboot";
|
|
reg = <0x000000 0x020000>;
|
|
read-only;
|
|
};
|
|
|
|
uboot: u-boot@20000 {
|
|
label = "u-boot";
|
|
reg = <0x020000 0x020000>;
|
|
read-only;
|
|
};
|
|
|
|
firmware@40000 {
|
|
label = "firmware";
|
|
reg = <0x040000 0xec0000>;
|
|
compatible = "denx,uimage";
|
|
};
|
|
|
|
info: info@f40000 {
|
|
label = "info";
|
|
reg = <0xf40000 0x020000>;
|
|
};
|
|
|
|
config: config@f60000 {
|
|
label = "config";
|
|
reg = <0xf60000 0x050000>;
|
|
};
|
|
|
|
partition@fc0000 {
|
|
label = "partition-table";
|
|
reg = <0xfc0000 0x010000>;
|
|
};
|
|
|
|
art: art@ff0000 {
|
|
label = "art";
|
|
reg = <0xff0000 0x010000>;
|
|
read-only;
|
|
};
|
|
};
|