mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-18 21:48:23 +02:00
Code Issues
a60721f2ed
openwrt/include/image-commands.mk
Michał Kępień a60721f2ed mikrotik: switch to Yafut for building MikroTik NOR images 
The Yafut tool now has limited capabilities for working on filesystem
images stored in regular files.  This enables preparing Yaffs2 images
for devices with NOR flash using upstream Yaffs2 filesystem code instead
of the custom kernel2minor tool.

Since minimizing the size of the resulting filesystem image size is
important and upstream Yaffs2 code requires two allocator reserve blocks
to be available when writing a file to the filesystem, a trick is
employed while preparing an OpenWRT image: the blank filesystem image
that Yafut operates on initially contains two extra erase blocks that
are chopped off after the kernel file is written.  This is safe to do
because Yaffs2 has a true log structure and therefore only ever writes
sequentially (and the size of the kernel file is known beforehand).
While the two extra erase blocks are necessary for writes, Yaffs2 code
seems to be perfectly capable of reading back files from a "truncated"
filesystem that does not contain these extra erase blocks.

In terms of image size, this new approach is only marginally worse than
the current kernel2minor-based one: specifically, upstream Yaffs2 code
needs to write three object headers (each of which takes up an entire
data chunk) when the kernel file is written to the filesystem:

  - an object header for the kernel file when it is created,

  - an object header for the root directory when the kernel file is
    created,

  - an updated object header for the kernel file when the latter is
    fully written (so that its new size can be recorded).

kernel2minor only writes two of these headers, which is the absolute
minimum required for reading the file back.  This means that the
Yafut-based approach causes firmware images to be at most one erase
block (64 kB) larger than those created using kernel2minor, but only in
the very unfortunate scenario where the size of the kernel file is
really close to a multiple of the erase block size.

The rest of the calculations performed when the empty filesystem image
is first prepared stems from the Yaffs2 layout used by MikroTik NOR
devices: each 65,536-byte erase block contains 63 chunks, each of which
consists of 1024 bytes of data followed by 16-byte Yaffs tags without
ECC data; each such group of 63 chunks is then followed by 16 bytes of
padding, which translates to "-C 1040 -B 64k -E" in the Yafut
invocation.  Yaffs2 checkpoints and summaries are disabled (using
Yafut's -P and -S switches, respectively) as they are merely performance
optimizations that require extra storage space.  The -L and -M switches
are used to force little-endian or big-endian byte order (respectively)
in the resulting filesystem image, no matter what byte order the build
host uses.  The tr invocation is used to ensure that the filesystem
image is initialized with 0xFF bytes (which are an indicator of unused
space for Yaffs2 code).

Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
Link: https://github.com/openwrt/openwrt/pull/13453
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-06-05 17:03:24 +02:00

718 lines
22 KiB
Makefile
Raw Blame History

# Build commands that can be called from Device/* templates
IMAGE_KERNEL = $(word 1,$^)
IMAGE_ROOTFS = $(word 2,$^)
define ModelNameLimit16
$(shell printf %.16s "$(word 2, $(subst _, ,$(1)))")
endef
define rootfs_align
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef
define Build/append-dtb
cat $(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb >> $@
endef
define Build/append-dtb-elf
$(TARGET_CROSS)objcopy \
--set-section-flags=.appended_dtb=alloc,contents \
--update-section \
.appended_dtb=$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@
endef
define Build/append-kernel
dd if=$(IMAGE_KERNEL) >> $@
endef
define Build/package-kernel-ubifs
mkdir $@.kernelubifs
cp $@ $@.kernelubifs/kernel
$(STAGING_DIR_HOST)/bin/mkfs.ubifs \
$(KERNEL_UBIFS_OPTS) \
-r $@.kernelubifs $@
rm -r $@.kernelubifs
endef
define Build/append-image
cp "$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1)" "$@.stripmeta"
fwtool -s /dev/null -t "$@.stripmeta" || :
fwtool -i /dev/null -t "$@.stripmeta" || :
dd if="$@.stripmeta" >> "$@"
rm "$@.stripmeta"
endef
ifdef IB
define Build/append-image-stage
dd if=$(STAGING_DIR_IMAGE)/$(BOARD)-$(SUBTARGET)-$(DEVICE_NAME)-$(1) >> $@
endef
else
define Build/append-image-stage
cp "$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1)" "$@.stripmeta"
fwtool -s /dev/null -t "$@.stripmeta" || :
fwtool -i /dev/null -t "$@.stripmeta" || :
mkdir -p "$(STAGING_DIR_IMAGE)"
dd if="$@.stripmeta" of="$(STAGING_DIR_IMAGE)/$(BOARD)-$(SUBTARGET)-$(DEVICE_NAME)-$(1)"
dd if="$@.stripmeta" >> "$@"
rm "$@.stripmeta"
endef
endif
compat_version=$(if $(DEVICE_COMPAT_VERSION),$(DEVICE_COMPAT_VERSION),1.0)
json_quote=$(subst ','\'',$(subst ",\",$(1)))
#")')
legacy_supported_message=$(SUPPORTED_DEVICES) - Image version mismatch: image $(compat_version), \
device 1.0. Please wipe config during upgrade (force required) or reinstall. \
$(if $(DEVICE_COMPAT_MESSAGE),Reason: $(DEVICE_COMPAT_MESSAGE),Please check documentation ...)
metadata_devices=$(if $(1),$(subst "$(space)","$(comma)",$(strip $(foreach v,$(1),"$(call json_quote,$(v))"))))
metadata_json = \
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
"metadata_version": "1.1", \
"compat_version": "$(call json_quote,$(compat_version))", \
$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
"version": { \
"dist": "$(call json_quote,$(VERSION_DIST))", \
"version": "$(call json_quote,$(VERSION_NUMBER))", \
"revision": "$(call json_quote,$(REVISION))", \
"target": "$(call json_quote,$(TARGETID))", \
"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
} \
}'
define Build/append-metadata
$(if $(SUPPORTED_DEVICES),-echo $(call metadata_json) | fwtool -I - $@)
sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
ucert -A -c "$@.ucert" -x "$@.sig" ;\
fwtool -S "$@.ucert" "$@" ;\
}
endef
define Build/append-rootfs
dd if=$(IMAGE_ROOTFS) >> $@
endef
define Build/append-squashfs-fakeroot-be
rm -rf $@.fakefs $@.fakesquashfs
mkdir $@.fakefs
$(STAGING_DIR_HOST)/bin/mksquashfs3-lzma \
$@.fakefs $@.fakesquashfs \
-noappend -root-owned -be -nopad -b 65536 \
$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
cat $@.fakesquashfs >> $@
endef
define Build/append-squashfs4-fakeroot
rm -rf $@.fakefs $@.fakesquashfs
mkdir $@.fakefs
$(STAGING_DIR_HOST)/bin/mksquashfs4 \
$@.fakefs $@.fakesquashfs \
-nopad -noappend -root-owned
cat $@.fakesquashfs >> $@
endef
define Build/append-string
echo -n $(1) >> $@
endef
define Build/append-md5sum-ascii-salted
cp $@ $@.salted
echo -ne $(1) >> $@.salted
$(STAGING_DIR_HOST)/bin/mkhash md5 $@.salted | head -c32 >> $@
rm $@.salted
endef
UBI_NAND_SIZE_LIMIT = $(IMAGE_SIZE) - ($(NAND_SIZE)*20/1024 + 4*$(BLOCKSIZE))
define Build/append-ubi
sh $(TOPDIR)/scripts/ubinize-image.sh \
$(if $(UBOOTENV_IN_UBI),--uboot-env) \
$(if $(KERNEL_IN_UBI),--kernel $(IMAGE_KERNEL)) \
$(foreach part,$(UBINIZE_PARTS),--part $(part)) \
--rootfs $(IMAGE_ROOTFS) \
$@.tmp \
-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
$(UBINIZE_OPTS)
cat $@.tmp >> $@
rm $@.tmp
$(if $(and $(IMAGE_SIZE),$(NAND_SIZE)),\
$(call Build/check-size,$(UBI_NAND_SIZE_LIMIT)))
endef
define Build/ubinize-image
sh $(TOPDIR)/scripts/ubinize-image.sh \
$(if $(UBOOTENV_IN_UBI),--uboot-env) \
$(foreach part,$(UBINIZE_PARTS),--part $(part)) \
--part $(word 1,$(1))="$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(word 2,$(1))" \
$@.tmp \
-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
$(UBINIZE_OPTS)
cat $@.tmp >> $@
rm $@.tmp
endef
define Build/ubinize-kernel
cp $@ $@.tmp
sh $(TOPDIR)/scripts/ubinize-image.sh \
--kernel $@.tmp \
$@ \
-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
$(UBINIZE_OPTS)
rm $@.tmp
endef
define Build/append-uboot
dd if=$(UBOOT_PATH) >> $@
endef
# append a fake/empty uImage header, to fool bootloaders rootfs integrity check
# for example
define Build/append-uImage-fakehdr
$(eval type=$(word 1,$(1)))
$(eval magic=$(word 2,$(1)))
touch $@.fakehdr
$(STAGING_DIR_HOST)/bin/mkimage \
-A $(LINUX_KARCH) -O linux -T $(type) -C none \
-n '$(VERSION_DIST) fake $(type)' \
$(if $(magic),-M $(magic)) \
-d $@.fakehdr \
-s \
$@.fakehdr
cat $@.fakehdr >> $@
endef
define Build/buffalo-dhp-image
$(STAGING_DIR_HOST)/bin/mkdhpimg $@ $@.new
mv $@.new $@
endef
define Build/buffalo-enc
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(eval args=$(wordlist 3,$(words $(1)),$(1)))
$(STAGING_DIR_HOST)/bin/buffalo-enc \
-p $(product) -v $(version) $(args) \
-i $@ -o $@.new
mv $@.new $@
endef
define Build/buffalo-enc-tag
$(call Build/buffalo-enc,'' '' -S 152 $(1))
endef
define Build/buffalo-tag-dhp
$(eval product=$(word 1,$(1)))
$(eval region=$(word 2,$(1)))
$(eval language=$(word 3,$(1)))
$(STAGING_DIR_HOST)/bin/buffalo-tag \
-d 0x01000000 -w 1 \
-a $(BUFFALO_TAG_PLATFORM) \
-v $(BUFFALO_TAG_VERSION) -m $(BUFFALO_TAG_MINOR) \
-b $(product) -p $(product) \
-r $(region) -r $(region) -l $(language) \
-I $@ -o $@.new
mv $@.new $@
endef
define Build/check-size
@imagesize="$$(stat -c%s $@)"; \
limitsize="$$(($(call exp_units,$(if $(1),$(1),$(IMAGE_SIZE)))))"; \
[ $$limitsize -ge $$imagesize ] || { \
$(call ERROR_MESSAGE, WARNING: Image file $@ is too big: $$imagesize > $$limitsize); \
rm -f $@; \
}
endef
define Build/copy-file
cat "$(1)" > "$@"
endef
# Create a header for a D-Link AI series recovery image and add it at the beginning of the image
# Currently supported: AQUILA M30, EAGLE M32 and R32
# Arguments:
# 1: Start string of the header
# 2: Firmware version
# 3: Block start address
# 4: Block length
# 5: Device FMID
define Build/dlink-ai-recovery-header
$(eval header_start=$(word 1,$(1)))
$(eval firmware_version=$(word 2,$(1)))
$(eval block_start=$(word 3,$(1)))
$(eval block_length=$(word 4,$(1)))
$(eval device_fmid=$(word 5,$(1)))
# create $@.header without the checksum
echo -en "$(header_start)\x00\x00" > "$@.header"
# Calculate checksum over data area ($@) and append it to the header.
# The checksum is the 2byte-sum over the whole data area.
# Every overflow during the checksum calculation must increment the current checksum value by 1.
od -v -w2 -tu2 -An --endian little "$@" | awk '{ s+=$$1; } END { s%=65535; printf "%c%c",s%256,s/256; }' >> "$@.header"
echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00" >> "$@.header"
echo -en "$(firmware_version)" >> "$@.header"
# Only one block supported: Erase start/length is identical to data start/length
echo -en "$(block_start)$(block_length)$(block_start)$(block_length)" >> "$@.header"
# Only zeros
echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "$@.header"
# Last 16 bytes, but without checksum
echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00" >> "$@.header"
echo -en "$(device_fmid)" >> "$@.header"
# Calculate and append checksum: The checksum must be set so that the 2byte-sum of the whole header is 0.
# Every overflow during the checksum calculation must increment the current checksum value by 1.
od -v -w2 -tu2 -An --endian little "$@.header" | awk '{s+=65535-$$1;}END{s%=65535;printf "%c%c",s%256,s/256;}' >> "$@.header"
cat "$@.header" "$@" > "$@.new"
mv "$@.new" "$@"
rm "$@.header"
endef
define Build/dlink-sge-image
$(STAGING_DIR_HOST)/bin/dlink-sge-image $(1) $@ $@.enc
mv $@.enc $@
endef
define Build/edimax-header
$(STAGING_DIR_HOST)/bin/mkedimaximg -i $@ -o $@.new $(1)
@mv $@.new $@
endef
define Build/elecom-product-header
$(eval product=$(word 1,$(1)))
$(eval fw=$(if $(word 2,$(1)),$(word 2,$(1)),$@))
( \
echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
echo -n "0.00" | dd bs=16 count=1 conv=sync; \
dd if=$(fw); \
) > $(fw).new
mv $(fw).new $(fw)
endef
define Build/elecom-wrc-gs-factory
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(eval hash_opt=$(word 3,$(1)))
$(MKHASH) md5 $(hash_opt) $@ >> $@
( \
echo -n "ELECOM $(product) v$(version)" | \
dd bs=32 count=1 conv=sync; \
dd if=$@; \
) > $@.new
mv $@.new $@
endef
define Build/elx-header
$(eval hw_id=$(word 1,$(1)))
$(eval xor_pattern=$(word 2,$(1)))
( \
echo -ne "\x00\x00\x00\x00\x00\x00\x00\x03" | \
dd bs=42 count=1 conv=sync; \
hw_id="$(hw_id)"; \
echo -ne "\x$${hw_id:0:2}\x$${hw_id:2:2}\x$${hw_id:4:2}\x$${hw_id:6:2}" | \
dd bs=20 count=1 conv=sync; \
echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
dd bs=8 count=1 conv=sync; \
echo -ne "$$($(MKHASH) md5 $@ | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
dd bs=58 count=1 conv=sync; \
) > $(KDIR)/tmp/$(DEVICE_NAME).header
$(call Build/xor-image,-p $(xor_pattern) -x)
cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > $@.new
mv $@.new $@
rm -rf $(KDIR)/tmp/$(DEVICE_NAME).header
endef
define Build/eva-image
$(STAGING_DIR_HOST)/bin/lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
mv $@.new $@
endef
define Build/initrd_compression
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_BZIP2),.bzip2) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_GZIP),.gzip) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZ4),.lz4) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA),.lzma) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZO),.lzo) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_XZ),.xz) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_ZSTD),.zstd)
endef
define Build/fit
$(TOPDIR)/scripts/mkits.sh \
-D $(DEVICE_NAME) -o $@.its -k $@ \
-C $(word 1,$(1)) \
$(if $(word 2,$(1)),\
$(if $(findstring 11,$(if $(DEVICE_DTS_OVERLAY),1)$(if $(findstring $(KERNEL_BUILD_DIR)/image-,$(word 2,$(1))),,1)), \
-d $(KERNEL_BUILD_DIR)/image-$$(basename $(word 2,$(1))), \
-d $(word 2,$(1)))) \
$(if $(findstring with-rootfs,$(word 3,$(1))),-r $(IMAGE_ROOTFS)) \
$(if $(findstring with-initrd,$(word 3,$(1))), \
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE), \
-i $(KERNEL_BUILD_DIR)/initrd.cpio$(strip $(call Build/initrd_compression)))) \
-a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
$(if $(DEVICE_FDT_NUM),-n $(DEVICE_FDT_NUM)) \
$(if $(DEVICE_DTS_DELIMITER),-l $(DEVICE_DTS_DELIMITER)) \
$(if $(DEVICE_DTS_LOADADDR),-s $(DEVICE_DTS_LOADADDR)) \
$(if $(DEVICE_DTS_OVERLAY),$(foreach dtso,$(DEVICE_DTS_OVERLAY), -O $(dtso):$(KERNEL_BUILD_DIR)/image-$(dtso).dtbo)) \
-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config-1") \
-A $(LINUX_KARCH) -v $(LINUX_VERSION)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage $(if $(findstring external,$(word 3,$(1))),\
-E -B 0x1000 $(if $(findstring static,$(word 3,$(1))),-p 0x1000)) -f $@.its $@.new
@mv $@.new $@
endef
define Build/libdeflate-gzip
$(STAGING_DIR_HOST)/bin/libdeflate-gzip -f -12 -c $@ $(1) > $@.new
@mv $@.new $@
endef
define Build/gzip
$(STAGING_DIR_HOST)/bin/gzip -f -9n -c $@ $(1) > $@.new
@mv $@.new $@
endef
define Build/gzip-filename
@mkdir -p $@.tmp
@cp $@ $@.tmp/$(word 1,$(1))
$(if $(SOURCE_DATE_EPOCH),touch -hcd "@$(SOURCE_DATE_EPOCH)" $@.tmp/$(word 1,$(1)) $(word 2,$(1)))
$(STAGING_DIR_HOST)/bin/gzip -f -9 -N -c $@.tmp/$(word 1,$(1)) $(word 2,$(1)) > $@.new
@mv $@.new $@
@rm -rf $@.tmp
endef
define Build/install-dtb
$(call locked, \
$(foreach dts,$(DEVICE_DTS), \
$(CP) \
$(DTS_DIR)/$(dts).dtb \
$(BIN_DIR)/$(IMG_PREFIX)-$(dts).dtb; \
), \
install-dtb-$(IMG_PREFIX) \
)
endef
define Build/iptime-crc32
$(STAGING_DIR_HOST)/bin/iptime-crc32 $(1) $@ $@.new
mv $@.new $@
endef
define Build/iptime-naspkg
$(STAGING_DIR_HOST)/bin/iptime-naspkg $(1) $@ $@.new
mv $@.new $@
endef
define Build/jffs2
rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 && \
mkdir -p $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$$(dirname $(1)) && \
cp $@ $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$(1) && \
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 --pad \
$(if $(CONFIG_BIG_ENDIAN),--big-endian,--little-endian) \
--squash-uids -v -e $(patsubst %k,%KiB,$(BLOCKSIZE)) \
-o $@.new \
-d $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 \
2>&1 1>/dev/null | awk '/^.+$$$$/' && \
$(STAGING_DIR_HOST)/bin/padjffs2 $@.new -J $(patsubst %k,,$(BLOCKSIZE))
-rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/
@mv $@.new $@
endef
define Build/kernel2minor
$(eval temp_file := $(shell mktemp))
cp $@ $(temp_file)
kernel2minor -k $(temp_file) -r $(temp_file).new $(1)
mv $(temp_file).new $@
rm -f $(temp_file)
endef
define Build/yaffs-filesystem
let \
kernel_size="$$(stat -c%s $@)" \
kernel_chunks="(kernel_size / 1024) + 1" \
filesystem_chunks="kernel_chunks + 3" \
filesystem_blocks="(filesystem_chunks / 63) + 1" \
filesystem_size="filesystem_blocks * 64 * 1024" \
filesystem_size_with_reserve="(filesystem_blocks + 2) * 64 * 1024"; \
head -c $$filesystem_size_with_reserve /dev/zero | tr "\000" "\377" > $@.img \
&& yafut -d $@.img -w -i $@ -o kernel -C 1040 -B 64k -E -P -S $(1) \
&& truncate -s $$filesystem_size $@.img \
&& mv $@.img $@
endef
define Build/kernel-bin
rm -f $@
cp $< $@
endef
define Build/linksys-image
let \
size="$$(stat -c%s $@)" \
pad="$(call exp_units,$(PAGESIZE))" \
offset="256" \
pad="(pad - ((size + offset) % pad)) % pad"; \
dd if=/dev/zero bs=$$pad count=1 | tr '\000' '\377' >> $@
printf ".LINKSYS.01000409%-15s%08X%-8s%-16s" \
"$(call param_get_default,type,$(1),$(DEVICE_NAME))" \
"$$(cksum $@ | cut -d ' ' -f1)" \
"0" "K0000000F0246434" >> $@
dd if=/dev/zero bs=192 count=1 >> $@
endef
define Build/lzma
$(call Build/lzma-no-dict,-lc1 -lp2 -pb2 $(1))
endef
define Build/lzma-no-dict
$(STAGING_DIR_HOST)/bin/lzma e $@ $(1) $@.new
@mv $@.new $@
endef
define Build/moxa-encode-fw
$(TOPDIR)/scripts/moxa-encode-fw.py \
--input $@ \
--output $@ \
--magic $(MOXA_MAGIC) \
--hwid $(MOXA_HWID) \
--buildid 00000000
endef
define Build/netgear-chk
$(STAGING_DIR_HOST)/bin/mkchkimg \
-o $@.new \
-k $@ \
-b $(NETGEAR_BOARD_ID) \
$(if $(NETGEAR_REGION),-r $(NETGEAR_REGION),)
mv $@.new $@
endef
define Build/netgear-dni
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B $(NETGEAR_BOARD_ID) -v $(shell cat $(VERSION_DIST)| sed -e 's/[[:space:]]/-/g').$(firstword $(subst -, ,$(REVISION))) \
$(if $(NETGEAR_HW_ID),-H $(NETGEAR_HW_ID)) \
-r "$(1)" \
-i $@ -o $@.new
mv $@.new $@
endef
define Build/netgear-encrypted-factory
$(TOPDIR)/scripts/netgear-encrypted-factory.py \
--input-file $@ \
--output-file $@ \
--model $(NETGEAR_ENC_MODEL) \
--region $(NETGEAR_ENC_REGION) \
$(if $(NETGEAR_ENC_HW_ID_LIST),--hw-id-list "$(NETGEAR_ENC_HW_ID_LIST)") \
$(if $(NETGEAR_ENC_MODEL_LIST),--model-list "$(NETGEAR_ENC_MODEL_LIST)") \
--version V1.0.0.0.$(shell cat $(VERSION_DIST)| sed -e 's/[[:space:]]/-/g').$(firstword $(subst -, ,$(REVISION))) \
--encryption-block-size 0x20000 \
--openssl-bin "$(STAGING_DIR_HOST)/bin/openssl" \
--key 6865392d342b4d212964363d6d7e7765312c7132613364316e26322a5a5e2538 \
--iv 4a253169516c38243d6c6d2d3b384145
endef
define Build/openmesh-image
$(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" \
"$@-fwupgrade.cfg" \
"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" \
"$(call param_get_default,rootfs,$(1),$@)"
$(TOPDIR)/scripts/combined-ext-image.sh \
"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" "$@" \
"$@-fwupgrade.cfg" "fwupgrade.cfg" \
"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" "kernel" \
"$(call param_get_default,rootfs,$(1),$@)" "rootfs"
endef
define Build/pad-extra
dd if=/dev/zero bs=$(1) count=1 >> $@
endef
define Build/pad-offset
let \
size="$$(stat -c%s $@)" \
pad="$(call exp_units,$(word 1, $(1)))" \
offset="$(call exp_units,$(word 2, $(1)))" \
pad="(pad - ((size + offset) % pad)) % pad" \
newsize='size + pad'; \
dd if=$@ of=$@.new bs=$$newsize count=1 conv=sync
mv $@.new $@
endef
define Build/pad-rootfs
$(STAGING_DIR_HOST)/bin/padjffs2 $@ $(1) \
$(if $(BLOCKSIZE),$(BLOCKSIZE:%k=%),4 8 16 64 128 256)
endef
define Build/pad-to
$(call Image/pad-to,$@,$(1))
endef
define Build/patch-cmdline
$(STAGING_DIR_HOST)/bin/patch-cmdline $@ '$(CMDLINE)'
endef
# Convert a raw image into a $1 type image.
# E.g. | qemu-image vdi <optional extra arguments to qemu-img binary>
define Build/qemu-image
if command -v qemu-img; then \
qemu-img convert -f raw -O $1 $@ $@.new; \
mv $@.new $@; \
else \
echo "WARNING: Install qemu-img to create VDI/VMDK images" >&2; exit 1; \
fi
endef
define Build/qsdk-ipq-factory-nand
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its ubi $@
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/qsdk-ipq-factory-nor
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its hlos $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/seama
$(STAGING_DIR_HOST)/bin/seama -i $@ \
-m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
mv $@.seama $@
endef
define Build/seama-seal
$(STAGING_DIR_HOST)/bin/seama -i $@ -s $@.seama \
-m "signature=$(SEAMA_SIGNATURE)"
mv $@.seama $@
endef
define Build/senao-header
$(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
mv $@.new $@
endef
define Build/sysupgrade-tar
sh $(TOPDIR)/scripts/sysupgrade-tar.sh \
--board $(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)) \
--kernel $(call param_get_default,kernel,$(1),$(IMAGE_KERNEL)) \
--rootfs $(call param_get_default,rootfs,$(1),$(IMAGE_ROOTFS)) \
$@
endef
define Build/tplink-safeloader
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(TPLINK_BOARD_ID) \
-V $(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@.new \
-j \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-S) && mv $@.new $@ || rm -f $@
endef
define Build/tplink-v1-header
$(STAGING_DIR_HOST)/bin/mktplinkfw \
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-m $(TPLINK_HEADER_VERSION) -N "$(VERSION_DIST)" -V $(REVISION) \
-k $@ -o $@.new $(1)
@mv $@.new $@
endef
# combine kernel and rootfs into one image
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
# <type> is "sysupgrade" or "factory"
#
# -a align the rootfs start on an <align> bytes boundary
# -j add jffs2 end-of-filesystem markers
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/tplink-v1-image
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) \
-N "$(VERSION_DIST)" -V $(REVISION) -m $(TPLINK_HEADER_VERSION) \
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new -j -X 0x40000 \
-a $(call rootfs_align,$(FILESYSTEM)) \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
endef
define Build/tplink-v2-header
$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
-T $(TPLINK_HVERSION) -V "ver. 2.0" \
-k $@ -o $@.new $(1)
@mv $@.new $@
endef
define Build/tplink-v2-image
$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) \
-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
-T $(TPLINK_HVERSION) -V "ver. 2.0" -a 0x4 -j \
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new $(1)
cat $@.new >> $@
rm -rf $@.new
endef
define Build/uImage
$(if $(UIMAGE_TIME),SOURCE_DATE_EPOCH="$(UIMAGE_TIME)") \
mkimage \
-A $(LINUX_KARCH) \
-O linux \
-T kernel \
-C $(word 1,$(1)) \
-a $(KERNEL_LOADADDR) \
-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION))' \
$(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC)) \
$(wordlist 2,$(words $(1)),$(1)) \
-d $@ $@.new
mv $@.new $@
endef
define Build/xor-image
$(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor $(1)
mv $@.xor $@
endef
define Build/zip
rm -rf $@.tmp
mkdir $@.tmp
mv $@ $@.tmp/$(word 1,$(1))
TZ=UTC $(STAGING_DIR_HOST)/bin/zip -j -X \
$(wordlist 2,$(words $(1)),$(1)) \
$@ $@.tmp/$(if $(word 1,$(1)),$(word 1,$(1)),$$(basename $@))
rm -rf $@.tmp
endef
define Build/zyxel-ras-image
let \
newsize="$(call exp_units,$(RAS_ROOTFS_SIZE))"; \
$(STAGING_DIR_HOST)/bin/mkrasimage \
-b $(RAS_BOARD) \
-v $(RAS_VERSION) \
-r $@ \
-s $$newsize \
-o $@.new \
$(if $(findstring separate-kernel,$(word 1,$(1))),-k $(IMAGE_KERNEL)) \
&& mv $@.new $@
endef
View Git Blame Copy Permalink