1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-20 14:38:20 +02:00
openwrt/target/linux/bcm27xx/patches-5.10/950-0274-media-dt-bindings-media-i2c-Add-mono-version-to-IMX2.patch
Álvaro Fernández Rojas 8299d1f057 bcm27xx: add kernel 5.10 support
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:07 +02:00

37 lines
1.5 KiB
Diff

From 5e67752c725fa06d0e2455dac19fbef93e313eb7 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Thu, 25 Jun 2020 16:52:14 +0100
Subject: [PATCH] media: dt-bindings: media: i2c: Add mono version to
IMX290 bindings
The IMX290 module is available as either monochrome or colour and
the variant is not detectable at runtime.
Add a new compatible string for the monochrome version.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
Documentation/devicetree/bindings/media/i2c/imx290.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/Documentation/devicetree/bindings/media/i2c/imx290.txt
+++ b/Documentation/devicetree/bindings/media/i2c/imx290.txt
@@ -1,13 +1,14 @@
* Sony IMX290 1/2.8-Inch CMOS Image Sensor
The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
-Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
-interfaces. The sensor output is available via CMOS logic parallel SDR output,
+Square Pixel for Color or Monochrome Cameras. It is programmable through I2C
+and 4-wire interfaces.
+The sensor output is available via CMOS logic parallel SDR output,
Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
default. No bindings have been defined for the other busses.
Required Properties:
-- compatible: Should be "sony,imx290"
+- compatible: Should be "sony,imx290", or "sony,imx290-mono"
- reg: I2C bus address of the device
- clocks: Reference to the xclk clock.
- clock-names: Should be "xclk".