Robert Marko 99f6f2c0b8 ar71xx: Add support for TP-Link CPE210 v3 ... Looks identical to the v2. This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Robert Marko <robimarko@gmail.com> [Rebased, adjusted for separate tplink-safeloader entry, dynamic partitioning] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2019-04-02 02:09:58 +02:00
..
base-files	ar71xx: Add support for TP-Link CPE210 v3	2019-04-02 02:09:58 +02:00
files	ar71xx: Add support for TP-Link CPE210 v3	2019-04-02 02:09:58 +02:00
generic
image	ar71xx: Add support for TP-Link CPE210 v3	2019-04-02 02:09:58 +02:00
mikrotik
nand
patches-4.14	kernel: bump 4.14 to 4.14.107	2019-03-22 18:14:28 +01:00
tiny
config-4.14
Makefile
modules.mk