1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 05:58:53 +02:00
openwrt/target/linux/ramips
Georgi Vlaev 8c51ddeff0 ramips: add support for TP-Link RE650 v1
TP-Link RE650 v1 is a dual-band AC2600 range extender,
based on MediaTek MT7621A and MT7615E. According to the
wikidevi entry for RE650 this device is identical with
TP-Link RE500 as hardware. This patch supports only RE650.

Hardware specification:

- SoC 880 MHz - MediaTek MT7621AT
- 128 MB of DDR3 RAM
- 16 MB - Winbond 25Q128FVSG
- 4T4R 2.4 GHz - MediaTek MT7615E
- 4T4R 5 GHz - MediaTek MT7615E
- 1x 1 Gbps Ethernet - MT7621AT integrated
- 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2))
- 4x buttons (Reset, Power, WPS, LED)
- UART header (J1) - 2:GND, 3:RX, 4:TX
  Serial console @ 57600,8n1

Flash instructions:

Upload
openwrt-ramips-mt7621-tplink_re650-v1-squashfs-factory.bin
from the RE650 web interface.

TFTP recovery to stock firmware:

Unfortunately, I can't find an easy way to recover the RE
without opening the device and using modified binaries. The
TFTP upload will only work if selected from u-boot, which
means you have to open the device and attach to the serial
console. The TFTP update procedure does *not* accept the
published vendor firmware binaries. However, it allows to
flash kernel + rootfs binaries, and this works if you have
a backup of the original contents of the flash. It's probably
possible to create special image out of the vendor binaries
and use that as recovery image.

Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com>
[re-added variables for kernel header]
Signed-off-by: David Bauer <mail@david-bauer.net>
2019-07-17 23:14:23 +02:00
..
base-files ramips: add support for TP-Link RE650 v1 2019-07-17 23:14:23 +02:00
dts ramips: add support for TP-Link RE650 v1 2019-07-17 23:14:23 +02:00
files-4.14/drivers ramips: mtk-mmc: mt76x8: check ESD_MODE before applying AGPIO_CFG 2019-07-16 09:50:16 +08:00
image ramips: add support for TP-Link RE650 v1 2019-07-17 23:14:23 +02:00
mt76x8 ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB 2019-07-08 22:00:24 +02:00
mt7620 ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB 2019-07-08 22:00:24 +02:00
mt7621 ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB 2019-07-08 22:00:24 +02:00
patches-4.14 ramips: mt7621: add support for memory detection 2019-07-11 22:11:21 +08:00
rt288x ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 2019-01-26 21:46:33 +01:00
rt305x ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB 2019-07-08 22:00:24 +02:00
rt3883 ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB 2019-07-08 22:00:24 +02:00
Makefile
modules.mk kernel: Fix kmod-regmap split 2019-01-27 11:07:14 +01:00