mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 05:58:53 +02:00
Code Issues
OpenWrt Source Repository https://openwrt.org/
37,876 Commits 8 Branches 72 Tags 240 MiB
C 60.7%
Makefile 19.7%
Shell 7%
Roff 6.8%
Perl 2.6%
Other 3.1%
863e79f8d5
Go to file
Hauke Mehrtens 863e79f8d5 lantiq: add support for kernel 4.9 
The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch

The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:44:13 +01:00
.github Add Issue submission template (redirect to bugs.lede-project.org) 2016-09-01 09:01:04 -04:00
config ccache, samba36: fix samba.org addresses to use https 2017-02-02 00:14:03 +01:00
include ARC: use -mcpu=XXX instead of obsolete -mXXX 2017-02-11 06:53:25 +01:00
package ltq-vmmc: fix build with kernel 4.9 2017-02-11 23:31:47 +01:00
scripts build: remove libc version suffix from build/staging directories 2017-02-07 17:18:15 +01:00
target lantiq: add support for kernel 4.9 2017-02-11 23:44:13 +01:00
toolchain glibc: update to version 2.25 2017-02-11 21:18:42 +01:00
tools cmake: update to version 3.7.2 2017-02-09 14:49:25 +01:00
.gitattributes
.gitignore gitignore: add /overlay 2017-01-15 18:16:29 +01:00
BSDmakefile
Config.in
feeds.conf.default Add video feed to feeds.conf.default 2017-01-25 16:04:39 +01:00
LICENSE
Makefile Revert "build: always run package/cleanup before package/compile" 2017-01-22 13:47:40 +01:00
README README: Update project README 2016-05-12 03:29:36 +02:00
rules.mk build: Pass -iremap gcc option as a single argument 2017-02-09 14:49:34 +01:00

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org