Alexandru Gagniuc 7bba7ccde9 realtek: EnGenius EWS2910P: use the mtd3 partition for root overlay ... The root overlay is mounted on the "rootfs_data" partition. This comes at the end of the firmware image, courtesy of mtdsplit. There is very little space left (About 1MB), which can fill up rapidly. The "firmware" and "firmware2" partitions are part of the bootloader dual firmware logic. They should contain independent, valid uImages. This leaves "jffs2-cfg" (mtd3) and "jffs2-log" (mtd4) as candidates. mtd3 is about 13.7 MB and is used by the vendor firmware to store configuration settings. It is only erased by vendor firmware during a factory reset. By naming this partition "rootfs_data", it becomes the root overlay, providing significantly more room. Even with mtdsplit wanting to create a "rootfs_data" on the firmware partition, mtd3 is used as the overlay. Rename "jffs2-cfg" to "rootfs_data", and profit from the extra space. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>		2022-08-13 19:19:38 +02:00
..
imagebuilder
linux	realtek: EnGenius EWS2910P: use the mtd3 partition for root overlay	2022-08-13 19:19:38 +02:00
llvm-bpf
sdk	sdk: add spidev-test to the bundle of userspace sources	2022-07-17 14:19:21 +02:00
toolchain
Config.in
Makefile