mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-21 06:58:37 +02:00
Code Issues
OpenWrt Source Repository https://openwrt.org/
48,363 Commits 8 Branches 72 Tags 241 MiB
C 60.6%
Makefile 19.7%
Shell 7%
Roff 6.9%
Perl 2.6%
Other 3.1%
5e86877f36
Go to file
Adrian Schmutzler 5e86877f36 ath79: correctly define WiFi switch for TL-WR841ND v8 
The TL-WR841ND v8 feature a WiFi switch instead of a button.
This adds the corresponding input-type to prevent booting into
failsafe regularly.

This has been defined correctly in ar71xx, but was overlooked
when migrating to ath79. In contrast, the TL-WR842ND v2, which
has the key set up as switch in ar71xx, actually has a button.
The TL-MR3420 v2 has a button as well and is set up correctly
for both targets. (Information based on TP-Link user guide)

Note:

While looking into this, I found that support PR for TL-MR3420 v2
switched reset button to ACTIVE_HIGH. However, the other two
device still use ACTIVE_LOW. This seems strange, but I cannot
verify it lacking the affected devices.

Fixes: FS#2733
Fixes: 9601d94138de ("add support for TP-Link TL-WR841N/ND v8")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-21 12:02:35 +02:00
.github
config build: improve ccache support 2020-07-11 15:19:53 +02:00
include kernel: bump 5.4 to 5.4.52 2020-07-17 11:00:33 +02:00
package hostapd: enter DFS state if no available channel is found 2020-07-20 15:08:19 +02:00
scripts build,json: fix compatibility with Python 3.5 2020-07-13 22:45:04 +02:00
target ath79: correctly define WiFi switch for TL-WR841ND v8 2020-07-21 12:02:35 +02:00
toolchain glibc: fix avx2 strncmp offset compare condition check [BZ #25933] 2020-07-13 22:40:22 +02:00
tools tplink-safeloader: expand support list for TP-Link CPE210 v3 2020-07-20 13:43:36 +02:00
.gitattributes
.gitignore build: improve ccache support 2020-07-11 15:19:53 +02:00
BSDmakefile
Config.in
feeds.conf.default feeds: add freifunk feed 2020-06-24 14:58:17 +02:00
LICENSE
Makefile build: improve ccache support 2020-07-11 15:19:53 +02:00
README build: switch to Python 3 2019-07-26 08:09:16 +02:00
rules.mk build: improve ccache support 2020-07-11 15:19:53 +02:00

README 

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org