mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 05:58:53 +02:00
Code Issues
OpenWrt Source Repository https://openwrt.org/
22,323 Commits 8 Branches 72 Tags 240 MiB
C 60.7%
Makefile 19.7%
Shell 7%
Roff 6.8%
Perl 2.6%
Other 3.1%
5d8a7a0ce5
Go to file
Gabor Juhos 5d8a7a0ce5 Make teql hotplug script run sooner 
In particular, it wants to run before the ntpclient script. Which may
block for a long time attempting to do DNS lookups for NTP servers. In
my case, that would have *worked* if the new device had been added to
teql first, rather than timing out.

This was effectively causing a huge delay between an interface coming
up, and routing actually starting to work.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34442
2012-12-02 13:04:03 +00:00
docs update switch documentation 2012-10-12 12:13:56 +00:00
include build: Add TARGET_ROOTFS_RESERVED_PCT option to reduce wasted space 2012-11-29 17:37:15 +00:00
package Make teql hotplug script run sooner 2012-12-02 13:04:03 +00:00
scripts remove support for ubicom32 2012-11-30 10:53:55 +00:00
target imagebuilder: use file_copy to deploy files/ in the image generation phase 2012-12-02 12:20:43 +00:00
toolchain toolchain: use file_copy to install the initial gcc files 2012-12-02 12:20:47 +00:00
tools ipkg-utils: Force gnu format for tar (#12496) 2012-11-19 19:29:01 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile
Config.in Change default TARGET_ROOTFS_RESERVED_PCT to zero to avoid wasted space 2012-12-02 13:04:01 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
LICENSE
Makefile Makefile: add a check to bail out early when the path to the openwrt directory contains spaces (#12344) 2012-10-21 02:00:11 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
rules.mk rules.mk: provide a macro "file_copy" which removes any symlink in the destination dir that would be overwritten 2012-12-02 12:20:34 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org