Xavier Douville 5ac974f214 ar71xx: Add support for Mikrotik RB SXT 2nD r3 ... The Mikrotik RouterBOARD SXT 2nD r3 is an outdoor WiFi AP / CPE with a single 2.4 GHz radio and a 100 Mbps Ethernet port. The device similar to the SXT 2nD r2, but it has SPI NOR flash instead of NAND flash. Hardware -------- CPU: Atheros AR9344 (600 MHz) RAM: 64 MiB FLASH: 16 MiB SPI NOR W25Q128 ETH: 1x 100 Mbps Atheros AG71xx WiFi: 2T2R 802.11b/g/n (ath9k) Power: Passive PoE 8-30 V Installation instructions: 1. Boot openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf using a DHCP+TFTP server. 2. Erase the "firmware" partition using the mtd command. This should no longer be required once this patch is merged. 3. Use sysupgrade to install to flash. The file openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin should be used. Signed-off-by: Xavier Douville <github@douville.org>		2019-03-22 00:40:29 +01:00
..
board.d	ar71xx: Add support for Mikrotik RB SXT 2nD r3	2019-03-22 00:40:29 +01:00
hotplug.d	ar71xx: Speed up caldata/eeprom handling	2019-03-13 16:27:41 +01:00
uci-defaults	ar71xx: Add userspace support for Mikrotik rb-2011iLS	2018-04-30 09:01:12 +02:00
diag.sh	ar71xx: Add support for Mikrotik RB SXT 2nD r3	2019-03-22 00:40:29 +01:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00