mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-10-18 13:29:16 +02:00
aa4d63c2da
The WLR-1240 (ZX-5434) is an AC1200 Wave 2 outdoor repeater with omnidirectional antennas for wall or pole mounting. The device is manufactured by Todaair and meant to be used with a tuya-based app, there is no webinterface for configuration. Specifications: - MT7628AN, 8 MiB SPI NOR flash, 64 MiB RAM, 2x2 802.11n - MT7613 2x2 802.11ac Wave 2 - 802.3af PoE or 12V 1A 5.5x2.1 power supply (included) - top RGB LED ring TFTP installation: - rename sysupgrade to `firmware_auto.bin` - provide at 192.168.1.10 during boot HTTP installation: - keep reset button pressed for 5 seconds during power on (light blue LED flashes slowly, then quickly to confirm, then remains steady on) - recovery web interface is at 192.168.1.1, upload sysupgrade Opening the device - use suction cup to remove top cap within LED ring - two screws are located in holes underneath silicone sealant - two further screws are located at the bottom initramfs boot - open device, connect serial console (pins are labelled) - keep pressing `4` during second tftp attempt to enter uboot shell - run `tftpboot 82000000` to avoid memory overlap, then `bootm` Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> |
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||