1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-19 15:05:12 +01:00
OpenWrt Source Repository https://openwrt.org/
Go to file
2009-07-16 13:39:36 +00:00
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include move the toolchain_install stampfile to the right place to fix spurious missing toolchain errors after cleaning stuff 2009-07-11 12:48:59 +00:00
package madwifi: turn software based tsf merging on by default, get rid of some iwpriv errors on wifi restart 2009-07-16 11:30:01 +00:00
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 2009-06-08 21:17:58 +00:00
target sysupgrade-ext2 sync before writing image, not after Sysupgrade for ext2 currently flushes the filesystem buffers after an image is written to the disk. This should happen before the image is written. 2009-07-16 13:39:36 +00:00
toolchain This patch adds a target for the IBM PowerXCell Accelerator Board. (aka mvXCell-8i from MatrixVision or GigaAccel 180 from Fixstars) 2009-07-16 10:19:13 +00:00
tools firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>) 2009-07-12 08:59:18 +00:00
.gitignore
BSDmakefile
Config.in add a config option to select the binary stripping method to use (between none, strip & sstrip) 2009-07-07 02:34:58 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
LICENSE
Makefile
README
rules.mk add a config option to select the binary stripping method to use (between none, strip & sstrip) 2009-07-07 02:34:58 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org