1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 22:18:16 +02:00
openwrt/target/linux/ramips
Daniel Danzberger 029c970464 ramips: mt7621: Add new device AsiaRF AP7621-001
Hardware specs:
SoC:	Mediatek MT7621A
CPU:	4x 880Mhz
Cache:	32 KB I-Cache and 32 KB D-Cach
	256 KB L2 Cache (shared by Dual-Core)
RAM:	DDR3 512MB 16bits BUS
FLASH:	16MB
Switch:	Mediatek Gigabit Switch (1 x LAN, 1 x WAN)
USB:	1x 3.0
PCI:	3x Mini PCIe
GPS:	Quectel L70B
BTN:	Reset
LED:	- Power
	- Ethernet
	- Wifi
	- USB
UART:	UART is present as Pads with throughholes on the PCB.
	They are located on left side.
	3.3V - RX - GND - TX / 57600-8N1
	3.3V is the square pad

Installation:
The stock image is a modified openwrt and can be overflashed via
 # sysupgrade -F image.bin

Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[removed unused label, formatting]
2019-06-25 15:02:21 +02:00
..
base-files ramips: mt7621: Add new device AsiaRF AP7621-001 2019-06-25 15:02:21 +02:00
dts ramips: mt7621: Add new device AsiaRF AP7621-001 2019-06-25 15:02:21 +02:00
files-4.14/drivers ramips: mt7620: add EPHY base mdio address changing possibility 2019-06-20 08:48:19 +02:00
image ramips: mt7621: Add new device AsiaRF AP7621-001 2019-06-25 15:02:21 +02:00
mt76x8 ramips: enable R6120 USB power 2019-04-06 19:14:06 +02:00
mt7620 ramips: Add support for Head Weblink HDRM200 2019-05-17 21:41:43 +02:00
mt7621 ramips: mt7621: disable CONFIG_MTD_SPLIT_FIRMWARE 2018-12-13 13:39:56 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.128 2019-06-20 15:48:48 +02:00
rt288x ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 2019-01-26 21:46:33 +01:00
rt305x ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 2019-01-26 21:46:33 +01:00
rt3883 ramips: rt3883: drop jimage support 2019-01-26 21:46:33 +01:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk kernel: Fix kmod-regmap split 2019-01-27 11:07:14 +01:00