Michal Cieslakiewicz a736f39432 ath79: add support for Netgear WNDR4500 v3 ... This patch introduces support for Netgear WNDR4500v3. Router is very similar to WNDR4300v2 and is based on the same PCB. Information gathered from various Internet sources (including https://patchwork.ozlabs.org/patch/809227/) shows following differences to WNDR4300v2: * two USB 2.0 ports with separate LEDs * USB LEDs soldered to secondary pads * WPS and RFKILL buttons soldered to secondary pads * described as N900 device with 3x3:3 MIMO for 2.4GHz radio * power supply requirement is DC 12V 2.5A * vendor HW ID suffix differs in one digit * bigger chassis Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>		2020-01-15 20:56:05 +01:00
..
base-files	ath79: add support for Netgear WNDR4500 v3	2020-01-15 20:56:05 +01:00
profiles
config-default	ath79: prepare NAND subtarget for upstream support of SPI NAND	2019-11-14 14:38:58 +08:00
target.mk	ath79: prepare NAND subtarget for upstream support of SPI NAND	2019-11-14 14:38:58 +08:00