1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-09-28 15:11:27 +02:00
openwrt/tools
Bernhard Geier 3930aab2cb ath79: add support for TP-Link WBS210 v2
TP-Link WBS210 v2 is an outdoor wireless CPE for 2.4 GHz with
two Ethernet ports based on Atheros AR9344

The device is the same as TP-Link CPE220 v2, but with higher TX power (27 dBm
instead of 12 dBm) and two antenna connectors instead of built-in antennas.

Specifications:
 - SoC: Atheros AR9344
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 2.4GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
 - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP: 192.168.0.100
Stock device TFTP adress: 192.168.0.254

The TP-Link WBS devices use the same GPIOs as the CPE devices,
except for the link4 LED. For this one, WBS devices use "2", while
CPE devices use "16". (Tested on WBS210 v2)

Signed-off-by: Bernhard Geier <freifunk@geierb.de>
[added comment about GPIO]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-11-03 13:59:18 +01:00
..
autoconf
automake
b43-tools
bc
bison
cbootimage
cbootimage-configs
ccache ccache: update to 3.7.4 2019-09-26 22:15:25 +02:00
cmake
coreutils tools/coreutils: install "touch" 2019-09-25 10:19:24 +02:00
dosfstools
e2fsprogs tools/e2fsprogs: Update to version 1.45.4 2019-10-08 21:51:08 +02:00
elftosb
expat expat: Update to version 2.2.9 2019-10-06 21:28:49 +02:00
findutils
firmware-utils ath79: add support for TP-Link WBS210 v2 2019-11-03 13:59:18 +01:00
flex
flock
genext2fs
gengetopt
gmp
include
isl
kernel2minor
libelf tools: libelf: fix headers to trigger -Wundef warnings 2019-09-03 10:44:21 +02:00
libressl
libtool
lzma
lzma-old
m4
make-ext4fs
missing-macros
mkimage tools/mkimage: Update U-Boot to version 2019.07 2019-09-04 22:35:22 +02:00
mklibs
mm-macros
mpc
mpfr
mtd-utils
mtools
padjffs2
patch
patch-image
patchelf
pkg-config
qemu
quilt
sdimage
sed
sparse
squashfs
squashfskit4
sstrip
tar
upslug2 upslug2: Update to git repository 2019-09-03 11:56:47 +02:00
wrt350nv2-builder
xz
zip
zlib
Makefile rules.mk: remove "$(STAGING_DIR)/include" 2019-11-02 20:51:56 +01:00