mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-18 21:48:23 +02:00
Code Issues
OpenWrt Source Repository https://openwrt.org/
48,173 Commits 8 Branches 72 Tags 240 MiB
C 60.7%
Makefile 19.7%
Shell 7%
Roff 6.8%
Perl 2.6%
Other 3.1%
326e488c7b
Go to file
Andrey Bondar 326e488c7b ath79: add support for 8devices Rambutan board 
Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan

Specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 2x USB2.0 host
- 2x UART
- SPI, I2C, GPIO

Flash instructions:

Upgrade from ar71xx target:
 sysupgrade -F /tmp/openwrt-ath79-nand-8dev_rambutan-squashfs-sysupgrade.tar
or upgrade from GUI (don't save config)

Use factory image to flash from U-Boot:
 tftpboot 80060000 openwrt-ath79-nand-8dev_rambutan-squashfs-factory.ubi
 nand erase.part ubi
 nand write 80060000 ubi ${filesize}

Signed-off-by: Petr Štetiar <ynezz@true.cz> [copy&pasted missing commit description]
Signed-off-by: Andrey Bondar <a.bondar@8devices.com>
2020-07-07 19:47:24 +02:00
.github build: Update README & github help 2018-07-08 09:41:53 +01:00
config kernel: rename CONFIG_NETPRIO_CGROUP to CONFIG_CGROUP_NET_PRIO 2020-06-27 00:19:13 +02:00
include build: conditionally enable testing-kernel feature 2020-07-07 10:32:09 +02:00
package dropbear: make rsa-sha2-256 pubkeys usable again 2020-07-07 19:47:24 +02:00
scripts build,json: fix build failure in case no data is found 2020-07-03 22:09:24 +01:00
target ath79: add support for 8devices Rambutan board 2020-07-07 19:47:24 +02:00
toolchain toolchain: remove gcc libssp and use libc variant 2020-06-17 23:57:07 +02:00
tools ramips: add support for TP-Link RE500 v1 2020-07-07 00:40:04 +02:00
.gitattributes
.gitignore Revert ".gitignore: ignore more scripts/config output" 2020-04-11 19:53:28 +01:00
BSDmakefile
Config.in
feeds.conf.default feeds: add freifunk feed 2020-06-24 14:58:17 +02:00
LICENSE
Makefile build: refactor JSON info files to profiles.json 2020-04-03 12:17:45 +02:00
README build: switch to Python 3 2019-07-26 08:09:16 +02:00
rules.mk rules.mk: remove "$(STAGING_DIR)/include" 2019-11-02 20:51:56 +01:00

README 

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org