1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-21 06:58:37 +02:00
openwrt/target/linux/ramips/dts/mt7620a_hnet_c108.dts
Sungbo Eo 1eceab3fc0 ramips: dts: use generic node name for flash
In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

While at it, remove unused m25p80 label.

Tested on rt5350 (for spi-nor) and rt3662 (for cfi-flash).

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-05-09 14:48:50 +02:00

185 lines
3.8 KiB
Plaintext

/*
* BSD LICENSE
*
* Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "hnet,c108", "ralink,mt7620a-soc";
model = "HNET C108";
aliases {
led-boot = &led_lan_green;
led-failsafe = &led_lan_green;
led-running = &led_lan_green;
led-upgrade = &led_lan_green;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
power_modem {
gpio-export,name = "power_modem";
gpio-export,output = <1>;
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
sdcard {
label = "c108:green:sdcard";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
modem_green {
label = "c108:green:modem";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
modem_red {
label = "c108:red:modem";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
lan_red {
label = "c108:red:lan";
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
};
led_lan_green: lan_green {
label = "c108:green:lan";
gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&sdhci {
status = "okay";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};
&state_default {
default {
groups = "i2c", "uartf", "spi refclk", "ephy";
function = "gpio";
};
};
&pcie {
status = "okay";
};