mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-10-19 05:58:53 +02:00
d41d9befb9
Add u-boot bootloader based on 2023.01 to support D1-based boards, currently: - Dongshan Nezha STU - LicheePi RV Dock - MangoPi MQ-Pro - Nezha D1 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
86 lines
2.1 KiB
Diff
86 lines
2.1 KiB
Diff
From ef808412055d1ef6fe77ff130d3f5a9432fef2d7 Mon Sep 17 00:00:00 2001
|
|
From: Samuel Holland <samuel@sholland.org>
|
|
Date: Tue, 3 May 2022 22:35:12 -0500
|
|
Subject: [PATCH 03/90] Adapt iNet U70B REV01 for development (FEL + serial)
|
|
|
|
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
---
|
|
arch/arm/dts/sun8i-a33-inet-u70b-rev1.dts | 11 +++++++++++
|
|
configs/iNet_U70B_rev1_defconfig | 14 +++++---------
|
|
2 files changed, 16 insertions(+), 9 deletions(-)
|
|
|
|
--- a/arch/arm/dts/sun8i-a33-inet-u70b-rev1.dts
|
|
+++ b/arch/arm/dts/sun8i-a33-inet-u70b-rev1.dts
|
|
@@ -11,6 +11,7 @@
|
|
|
|
aliases {
|
|
ethernet0 = &rtl8723cs;
|
|
+ serial0 = &uart0;
|
|
};
|
|
|
|
panel: panel {
|
|
@@ -76,6 +77,10 @@
|
|
};
|
|
};
|
|
|
|
+&mmc0 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
&mmc1 {
|
|
pinctrl-0 = <&mmc1_pg_pins>;
|
|
pinctrl-names = "default";
|
|
@@ -158,6 +163,12 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+&uart0 {
|
|
+ pinctrl-0 = <&uart0_pf_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
&uart1 {
|
|
pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
|
|
pinctrl-names = "default";
|
|
--- a/configs/iNet_U70B_rev1_defconfig
|
|
+++ b/configs/iNet_U70B_rev1_defconfig
|
|
@@ -1,12 +1,12 @@
|
|
CONFIG_ARM=y
|
|
CONFIG_ARCH_SUNXI=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-inet-u70b-rev1"
|
|
-# CONFIG_SPL_SERIAL is not set
|
|
CONFIG_SPL=y
|
|
CONFIG_MACH_SUN8I_A33=y
|
|
CONFIG_DRAM_CLK=480
|
|
CONFIG_DRAM_ZQ=31675
|
|
CONFIG_DRAM_ODT_EN=y
|
|
+CONFIG_UART0_PORT_F=y
|
|
CONFIG_MMC0_CD_PIN="PB4"
|
|
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:158,ri:162,up:25,lo:10,hs:20,vs:3,sync:3,vmode:0"
|
|
CONFIG_VIDEO_LCD_DCLK_PHASE=0
|
|
@@ -14,19 +14,15 @@ CONFIG_VIDEO_LCD_POWER="PH7"
|
|
CONFIG_VIDEO_LCD_BL_EN="PH6"
|
|
CONFIG_VIDEO_LCD_BL_PWM="PH0"
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
-CONFIG_CMD_BIND=y
|
|
-CONFIG_CMD_CLK=y
|
|
-CONFIG_CMD_PWM=y
|
|
-CONFIG_CMD_I2C=y
|
|
-CONFIG_CMD_WDT=y
|
|
+CONFIG_PREBOOT="fastboot usb 0"
|
|
CONFIG_CMD_PMIC=y
|
|
CONFIG_CMD_REGULATOR=y
|
|
-# CONFIG_NET is not set
|
|
CONFIG_AXP_GPIO=y
|
|
CONFIG_REGULATOR_AXP=y
|
|
CONFIG_REGULATOR_AXP_USB_POWER=y
|
|
CONFIG_AXP_DLDO1_VOLT=3300
|
|
CONFIG_DM_PWM=y
|
|
CONFIG_PWM_SUNXI=y
|
|
-# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
|
|
-CONFIG_USB_MUSB_HOST=y
|
|
+CONFIG_REMOTEPROC_SUN6I_AR100=y
|
|
+CONFIG_USB_MUSB_GADGET=y
|
|
+CONFIG_WATCHDOG_AUTOSTART=y
|