mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-10-19 14:08:17 +02:00
ac03e24635
TP-Link CPE710-v1 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on the AP152 reference board Specifications: - SoC: QCA9563-AL3A MIPS 74kc @ 775MHz, AHB @ 258MHz - RAM: 128MiB DDR2 @ 650MHz - Flash: 16MiB SPI NOR Based on the GD25Q128 - Wi-Fi 5Ghz: ath10k chip (802.11ac for up to 867Mbps on 5GHz wireless data rate) Based on the QCA9896 - Ethernet: one 1GbE port - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector - Power, LAN, WLAN5G Blue LEDs - 3x Blue LEDs Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 30-40 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP address:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net> [convert to nvmem, fix MAC assignment in 11-ath10k-caldata] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> |
||
---|---|---|
.. | ||
autoconf | ||
autoconf-archive | ||
automake | ||
b43-tools | ||
bc | ||
bison | ||
cbootimage | ||
cbootimage-configs | ||
ccache | ||
cmake | ||
coreutils | ||
cpio | ||
dosfstools | ||
e2fsprogs | ||
elftosb | ||
expat | ||
fakeroot | ||
findutils | ||
firmware-utils | ||
flex | ||
flock | ||
genext2fs | ||
gengetopt | ||
gmp | ||
include | ||
isl | ||
kernel2minor | ||
libressl | ||
libtool | ||
lzma | ||
lzma-old | ||
m4 | ||
make-ext4fs | ||
meson | ||
missing-macros | ||
mkimage | ||
mklibs | ||
mpc | ||
mpfr | ||
mtd-utils | ||
mtools | ||
ninja | ||
padjffs2 | ||
patch | ||
patch-image | ||
patchelf | ||
pkgconf | ||
quilt | ||
sdimage | ||
sed | ||
sparse | ||
squashfs | ||
squashfskit4 | ||
sstrip | ||
tar | ||
xxd | ||
xz | ||
zip | ||
zlib | ||
zstd | ||
Makefile |