Leon M. George 15f585afc5 ath79: add support for Compex WPJ563 ... Specifications: SoC: QCA9563 DRAM: 128MB DDR2 Flash: 16MB SPI-NOR 2 Gigabit ethernet ports 3×3 2.4GHz on-board radio miniPCIe slot that supports 5GHz radio PoE 24V passive or 36V-56V passive with optional IEEE 802.3af/at USB 3.0 header Installation: To install, either start tftp in bin/targets/ath79/generic/ and use the u-boot prompt over UART: tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj563-squashfs-sysupgrade.bin erase 0x9f680000 +1 erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize boot The cpximg file can be used with sysupgrade in the stock firmware (add SSH key in luci for root access) or with the built-in cpximg loader. The cpximg loader can be started either by holding the reset button during power up or by entering the u-boot prompt and entering 'cpximg'. Once it's running, a TFTP-server under 192.168.1.1 will accept the image appropriate for the board revision that is etched on the board. For example, if the board is labelled '7A02': tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj563-squashfs-cpximg-7a02.bin MAC addresses: <&uboot 0x2e010> *:71 (label) <&uboot 0x2e018> *:72 <&uboot 0x2e020> *:73 <&uboot 0x2e028> *:74 Only the first two are used (for ethernet), the WiFi modules have separate (valid) addresses. The latter two addresses are not used. Signed-off-by: Leon M. George <leon@georgemail.eu>		2020-07-26 02:14:45 +02:00
..
apm821xx
ar71xx
arc770
archs38
armvirt
at91
ath25
ath79	ath79: add support for Compex WPJ563	2020-07-26 02:14:45 +02:00
bcm27xx
bcm47xx
bcm53xx
bcm63xx
cns3xxx
gemini
generic
imx6
ipq40xx
ipq806x
ipq807x
kirkwood
lantiq
layerscape
malta
mediatek
mpc85xx
mvebu
mxs
octeon
octeontx
omap
oxnas
pistachio
ramips
rb532
rockchip
samsung
sunxi
tegra
uml
x86
zynq
Makefile