John Crispin 152d692a1f ramips: improve ralink ethernet driver ... Change list: * add tx scatter gather function. * add software rx vlan offload to let GRO work. * add jumbo frame support. because use build_skb so max MTU is 3812. * enable hardware tx vlan. * enable GRO and remove LRO. because it can improve performance and can work on forwarding. * enable/fix tx padding function. * let napi handle tx clean up. * support ethtool operation. now support message level, hardware status and coalesce. * ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it. Notes: * build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a. * TCP NAT performance improve. test with netperf. - rt2880(gigabit) from 5x to 12x Mbps. - rt3x5x from 6x to 94 Mbps. - rt5250 from 5x to 8x Mbps. - rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame. - mt7620 still 94Mbps. * TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43108		2014-10-29 19:43:59 +00:00
..
imagebuilder	postinst trigger: the new postinst trigger broke IB	2014-09-16 11:56:19 +00:00
linux	ramips: improve ralink ethernet driver	2014-10-29 19:43:59 +00:00
sdk	sdk: improve feed setup	2014-10-16 16:28:12 +00:00
toolchain	target/toolchain/Config.in: Clarify packaging of toolchain.	2014-10-14 12:21:16 +00:00
Config.in	kernel: add a NAND_SUPPORT symbol	2014-06-11 12:59:22 +00:00
Makefile	target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install	2012-06-06 17:24:05 +00:00