mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-10-19 14:08:17 +02:00
0822040671
At this moment loadaddr in most layerscape boards are configured to 0x81000000. 5.15 kernel on some boards is bigger than 5.10 and it cause error: Loading kernel from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-5.15.112 Created: 2023-05-21 17:39:35 UTC Type: Kernel Image Compression: gzip compressed Data Start: 0x810000ec Data Size: 7513944 Bytes = 7.2 MiB Architecture: AArch64 OS: Linux Load Address: 0x80000000 Entry Point: 0x80000000 Hash algo: crc32 Hash value: 6fd69550 Hash algo: sha1 Hash value: ee34c753ffb615e199a428762824ad4a0aaef90a Verifying Hash Integrity ... crc32+ sha1+ OK Loading fdt from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt fsl_ls1088a-rdb-sdboot device tree blob Created: 2023-05-21 17:39:35 UTC Type: Flat Device Tree Compression: uncompressed Data Start: 0x8172a98c Data Size: 19794 Bytes = 19.3 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 59792ba3 Hash algo: sha1 Hash value: 135585a49f86cd85acea559b78b0098ae99d5e12 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x8172a98c Uncompressing Kernel Image ERROR: new format image overwritten - must RESET the board to recover resetting ... This patch changes loadaddr to 0x88000000 (like LS1012A-FRDM board) to avoid overlapping for bigger images (like initramfs) too. Tested-by: Alexandra Alth <alexandra@alth.de> [LS1088ARDB] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
12 lines
778 B
Plaintext
12 lines
778 B
Plaintext
fdtaddr=0x8f000000
|
|
loadaddr=0x88000000
|
|
fdt_high=0xa0000000
|
|
initrd_high=0xffffffffffffffff
|
|
hwconfig=fsl_ddr:bank_intlv=auto
|
|
mc_init=sf probe 0:0;sf read 80000000 a00000 300000;sf read 80300000 e00000 100000;fsl_mc start mc 80000000 80300000;sf read 80400000 d00000 100000;fsl_mc apply dpl 80400000
|
|
qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
|
|
bootargs=root=/dev/mtdblock10 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=20c0000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),49m@0xf00000(firmware)
|
|
bootcmd=echo starting openwrt ...;run mc_init;run qspi_boot
|
|
bootdelay=3
|
|
fsl_bootcmd_mcinitcmd_set=y
|