Kevin Darbyshire-Bryant 42120bd7f3 lantiq: DGN3500: make switch LEDs blink on activity ... Make switch port LEDs blink on activity as they do with stock firmware. The u-boot loader sets suitable values in the LED control register that unfortunately get blown away by the linux switch driver init. Restore that value by using driver 'initvals'. 0x0431 is the led control register, the value 0x0960. Each nybble represents each LED's mode (LED3,2,1,0) in this case OFF, 1000LINK+Activity, 100/10LINK+Activity, OFF. Only LED1&2 are physically present. Enabling the blinkenlights exposed the fact that an RRCP packet was being emitted by the switch on all ports every second. Further initvals copied from stock firmware's u-boot driver disabled this 'feature'. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>		2017-04-25 19:29:59 +02:00
..
base-files	lantiq: improve DGN3500 LED definitions	2017-04-21 07:50:55 +02:00
dts	lantiq: DGN3500: make switch LEDs blink on activity	2017-04-25 19:29:59 +02:00
falcon	build: remove mips16 feature flag from target makefiles	2017-01-24 13:15:01 +01:00
files/firmware/lantiq	move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: add support for the Alpha ASL56026	2017-03-08 19:06:04 +01:00
patches-4.4	kernel: update kernel 4.4 to 4.4.61	2017-04-15 18:26:41 +02:00
patches-4.9	lantiq: drop tffs patches	2017-04-08 14:30:00 +02:00
xrx200	lantiq: add support for kernel 4.9	2017-02-11 23:44:13 +01:00
xway	build: remove mips16 feature flag from target makefiles	2017-01-24 13:15:01 +01:00
xway_legacy	build: remove mips16 feature flag from target makefiles	2017-01-24 13:15:01 +01:00
config-4.4	lantiq: add cpu temperatur sensor driver for xrx200	2016-08-03 15:30:13 +02:00
config-4.9	lantiq: add support for kernel 4.9	2017-02-11 23:44:13 +01:00
Makefile	lantiq: remove CPU_TYPE:=mips32r2, it gets overwritten anyway	2017-01-24 13:33:45 +01:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00