Pavel Kubelun
27c355f8a4
ipq806x: fix build errors
...
Add missing patches that broke LEDE builder while updating WDT driver
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-19 17:57:09 +01:00
Felix Fietkau
9d6d7d9a0e
ipq806x: append metadata to images
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:10 +01:00
Hannu Nyman
8459d85fa3
ipq806x: refresh patches
...
This patch refreshes the ipq806x kernel patches.
There was a large PR for ipq806x in the queue when the kernel patches
were refreshed for 4.4.32, so currently there is quite much fuzz for
ipq806x.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-17 14:23:01 +01:00
Pavel Kubelun
5aace5a5fb
ipq806x: fixes for R7800 and C2600
...
Updating spi pins configuration in R7800 and C2600 DTs
Adding more usb power pin export and gsbi6 in R7800 DT
Updating and fixing leds
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
3ac5eb9141
ipq806x: fix Netgear R7500v2 memory
...
Netgear R7500v2 has 512MB of RAM with 2MB reserved block in the end of memory region.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
bb8f5162fd
ipq806x: fix pci pins
...
Fix pci pins drive-strength according to oem sources.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
84781cb6dc
ipq806x: add vlans during switch init into R7800 DT
...
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
77b6bfc2f5
ipq806x: add support for RPM message RAM
...
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
dissent1
07d0c1b947
ipq806x: add support for RPM clock controller
...
The patch #179 for RPM has initially been made for apq806x board. It has been modified to support ipq806x instead of apq8064.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
506dc815b9
ipq806x: add CPU idle states
...
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
793d448a51
ipq806x: backport upstream wdt driver
...
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
524d7a7cde
ipq806x: fix pcie reset gpios
...
Fix perst-gpios property in accordance to the driver, so it stops spamming that it can't parse it.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-08 11:17:10 +01:00
Felix Fietkau
3616666126
ipq806x: fix zyxel image build error
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-04 13:06:35 +01:00
Felix Fietkau
fcf90318c5
ipq806x: clean up the kernel config and reduce kernel image size by disabling some unnecessary code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-04 13:06:35 +01:00
Felix Fietkau
fddd532612
ipq806x: fix a kconfig issue
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-04 13:06:35 +01:00
Pavel Kubelun
b2135f3ba5
ipq806x: update DT in accordance to new drivers And add some more DT nodes
...
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-03 08:28:16 +01:00
Pavel Kubelun
681f28990d
ipq806x: switch to generic cpufreq driver cpufreq-dt
...
This fixes ondemand frequency scaling and moves ipq806x onto upstream driver
Also switching to ondemand frequency scaling as it is fixed now
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-03 08:28:16 +01:00
Pavel Kubelun
a154a3d8be
ipq806x: add opp patches for voltage scaling
...
Preparing for cpufreq driver switch to generic cpufreq-dt
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-03 08:28:16 +01:00
Pavel Kubelun
8749fb7894
ipq806x: update clk-qcom patches
...
Preparing for cpufreq driver switch to generic cpufreq-dt
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-03 08:28:16 +01:00
Pavel Kubelun
bf7166e545
ipq806x: fix leds, sata port for Netgear R7800 and minor fixes - renamed leds in correct color accordance - blink power led with white during boot and with amber when flashing firmware - fixed usb leds - enabled unused wps and rfkill leds as wlan leds. Now rfkill led is for 2.4GHz and wps - 5GHz WIFI - removed unneeded bootargs - removed unneeded pci pins from R7800 DT (driver already handles it in proper way) and add tx offsetting - nand ecc step size - fixed sata ports
...
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-03 08:28:16 +01:00
Cezary Jackiewicz
dafbc94f95
ipq806x: TP-Link Archer C2600: convert old usbdev trigger to new usbport
...
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-11-03 08:21:32 +01:00
Pavel Kubelun
8f7e58c0fe
ipq806x: add reserved memory node in Netgear R7800
...
KERNEL BUG: BAD_PAGE_STATE in process appears here and there during intensive memory usage.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-10-31 16:48:04 +01:00
Henryk Heisig
0744b6a044
ipq806x: ArcherC2600: export usb power pins
...
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-10-31 16:40:54 +01:00
Henryk Heisig
dbf2feb2b3
ipq806x: ArcherC2600: devictree cleanup
...
add blank lines and use macros for GPIOs
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-10-31 16:40:28 +01:00
André Valentin
1465bebd74
ipq806x/nbg6817: add sysupgrade support
...
Add new way of flashing to mmc devices based on rootfs split with loop devices.
Signed-off-by: André Valentin <avalentin@marcant.net>
2016-10-26 12:37:47 +02:00
André Valentin
a0ed7af6c6
ipq806x/nbg6817: add support for ZyXEL NBG6817
...
CPU: 2x1.8GHz ARM, RAM: 512MiB
Storage: 4MiB serial Flash, 3.9GiB MMC
NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports
WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO
For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin
to device. Then run:
cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4
cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5
reboot -f
For debugging serial console is easily visible on board, no soldering needed.
Signed-off-by: André Valentin <avalentin@marcant.net>
2016-10-26 12:37:46 +02:00
Rafał Miłecki
0658527e1e
switch to the new usbport LED trigger
...
This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:09:45 +02:00
Felix Fietkau
a92f57599c
ipq806x: add back end-of-UBI marker for a few factory images (FS#228)
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-18 09:30:57 +02:00
Henryk Heisig
bcfb535730
ipq806x: C2600: change leds colour name
...
Signed-off-by: Henryk Heisig hyniu@o2.pl
2016-10-15 11:36:50 +02:00
Henryk Heisig
4bdf615878
ipq806x: add support for indicating the boot and upgrade state using four leds
...
Signed-off-by: Henryk Heisig hyniu@o2.pl
2016-10-15 11:36:50 +02:00
Pavel Kubelun
9677bfbb0f
ipq806x: fix wlan mac for Netgear R7800
...
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-10-06 08:01:33 +02:00
dissent1
eb7307cb94
ipq806x: update Netgear R7800 device tree
...
-add spi pins
-move mdio and rgmii pinctrl from gmac and mdio into pinmux node
-add i2c4 pinctrl into rpm node
-add pin details into several nodes
-update gmac1 and gmac2 parameters
-update mdio phy0 and phy4 registers by ddwrt devs findings
-fix i2c4 pin drive-strengh
-remove pcie pins as it's already present in ipq8065 DT
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-09-30 10:15:23 +02:00
Mathias Kresin
1cd0a4c688
image: add KERNEL_SIZE to the default device vars
...
This reverts commit ec37a565878fd79d4127cbb843c17ce3b8dc97c0 and fixes
the underlying issue.
2016-09-13 19:36:41 +02:00
Mathias Kresin
c7d5bc8197
ramips: improve Linksys EA8500 build code
...
Use of the kernel size variable.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-11 19:40:45 +02:00
Mathias Kresin
e7ec7a08aa
image: use k as unit suffix for blocksize
...
Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:56:05 +02:00
Roman Yeryomin
9dc367e6f0
ipq806x: fix ipq8065 s2a/s2b regulator frequency (fixes ethernet performance)
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2016-08-24 15:15:16 +02:00
Cezary Jackiewicz
9417293366
ipq806x: Archer C2600: Renaming LED accordance with the standard
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
2016-08-24 00:21:34 +02:00
John Crispin
2a64be5aa9
ipq806x: enable ondemand governor
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-24 00:19:19 +02:00
Jo-Philipp Wich
00e8571f2b
ipq806x: rename R7800 device tree file, merge R7500v2 dts addition
...
The R7800 is an IPQ8065, so rename its dts file to reflect that fact.
Also fold the R7500v2 dts addition into the existing 800-devicetree.patch.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-24 02:30:35 +02:00
Stijn Tintel
8072264b96
kernel: update kernel 4.4 to version 4.4.19
...
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked broken.
Runtime-tested on ar71xx, octeon and x86/64.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-23 10:51:17 +03:00
Alexis Green
c34f953fef
ipq806x: Build image for Netgear Nighthawk X4 R7500v2
...
Signed-off-by: Alexis Green <alexis@cessp.it>
[Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-22 17:24:48 +02:00
John Crispin
00516611bd
ipq806x: add usb pins to r7800 dts file
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-22 07:43:11 +02:00
John Crispin
d7e4b9babb
ipq806x: sync with latest patches sent by QCA
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-18 09:49:18 +02:00
dissent1
f3fbc80718
ipq806x: fix MAC_POWER_SEL for Netgear R7800
...
Fixes instability/corruption on the ethernet interface connected to port0 on the switch on Netgear R7800 as well.
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-07-26 08:39:36 +02:00
Jonas Gorski
532eb5f581
ipq806x: fix boot hang if cmdline contains words with r in the middle
...
The ATB DTB mangle code will enter an infinite loop if it encounters a
word in the command line that contains an r in the middle of the word.
Fix this by increasing ptr everytime before invoking strchr, ot avoid
finding the same r again.
This fixes booting at least on Netgear R7500v1, which contains
"ubi.mtd=rootfs" in its commandline, triggering the misbehaviour.
Fixes: 0ddcbee26151 ("ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-01 00:13:35 +02:00
Felix Fietkau
62d4665551
ipq806x: add missing sysupgrade-nand => sysupgrade-tar change
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 13:05:11 +02:00
Jo-Philipp Wich
db49dd894e
build: rename sysupgrade-nand to sysupgrade-tar
...
Now that the "sysupgrade-nand" step is used by non-NAND targets as well,
rename it to "sysupgrade-tar" to make it more generic.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Felix Fietkau
7a175e2d44
ipq806x: clean up redundant initialization of core device image variables
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Josh Bendavid
9780b2dd93
ipq806x: add patch for kernel compiler flags
...
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
2016-07-17 17:29:12 +02:00
Josh Bendavid
15bcda4be6
ipq806x: change compiler flags to arm cortex-a15
...
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
2016-07-17 17:29:12 +02:00