mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 05:58:53 +02:00
Code Issues

ipq806x: Add support for Netgear Nighthawk Pro Gaming XR450

Browse Source 
Motivation:
 Firmware with platform ID "XR450" required for easy installation.

Manufacturer pages:
 Product page: https://www.netgear.com/support/product/xr450
 Product Data Sheet: https://www.netgear.com/images/datasheet/networking/wifirouter/XR450.pdf
 Current firmware: https://www.downloads.netgear.com/files/GDC/XR450/XR450-V2.3.2.134.zip

Specifications:
Almost identical to Netgear XR500(https://openwrt.org/toh/hwdata/netgear/netgear_xr500)

Differences:
	Platform ID: XR450, utilized for firmware validation
	WLAN 2.4GHz: b/g/n Supports QAM64 (XR500 QAM256)

SoC: Qualcomm Atheros IPQ8065
RAM: 512 MB
Storage: 256 MiB
Wireless: Qualcomm Atheros QCA9984
Switch: Qualcomm Atheros AR8337 rev. 2
Ethernet: 5x 1000/100/10
USB: 2x 3.0

Install via WEB GUI (recommended):
1. Navigate within GUI to firmware update section
2. Select openwrt-ipq806x-netgear_xr450-squashfs-factory.img
3. Dismiss downgrade warning

Install via TFTP recovery (same as XR500/R7800):

1. Configure host PC to use static address 192.168.1.10 https://openwrt.org/toh/netgear/r7800#prerequisites_for_tftp_flashing
2. Flash openwrt-ipq806x-netgear_xr450-squashfs-factory.img using procedure https://openwrt.org/toh/netgear/r7800#tftp_flashing_process

Revert to stock firmware
1. Download current manufacturer firmware, decompress zip file to obtain img file
2. Use TFTP recovery method flash img file (currently XR450-V2.3.2.134.img)
ipq806x: add support to netgear_xr450

Signed-off-by: Andrzej Mialkowski <andrzej.mialkowski@gmail.com>
This commit is contained in:
Andrzej Mialkowski 2023-05-19 04:09:54 -07:00 committed by Christian Marangi
parent ae8db3941c
commit f2e1d37381
No known key found for this signature in database
GPG Key ID: AC001D09ADBFEAD7
5 changed files with 67 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ipq806x/base-files/etc/board.d/01_leds
View File

@ -37,6 +37,7 @@ netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\
netgear,r7800 |\
netgear,xr450 |\
netgear,xr500)
ucidef_set_led_usbport "usb1" "USB 1" "white:usb1" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb2" "USB 2" "white:usb2" "usb3-port1" "usb4-port1"

1
target/linux/ipq806x/base-files/etc/board.d/02_network
View File

@ -59,6 +59,7 @@ nec,wg2600hp3)
"2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
;;
netgear,r7800 |\
netgear,xr450 |\
netgear,xr500 |\
tplink,c2600 |\
tplink,vr2600v)

1
target/linux/ipq806x/base-files/lib/upgrade/platform.sh
View File

@ -17,6 +17,7 @@ platform_do_upgrade() {
netgear,r7500 |\
netgear,r7500v2 |\
netgear,r7800 |\
netgear,xr450 |\
netgear,xr500 |\
nokia,ac400i |\
qcom,ipq8064-ap148 |\

50
target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-xr450.dts Normal file
View File

@ -0,0 +1,50 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8065-nighthawk.dtsi"
/ {
model = "Netgear Nighthawk XR450";
compatible = "netgear,xr450", "qcom,ipq8065", "qcom,ipq8064";
};
&leds {
usb1 {
label = "white:usb1";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "white:usb2";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
&partitions {
partition@1880000 {
label = "ubi";
reg = <0x1880000 0xce00000>;
};
partition@e680000 {
label = "reserve";
reg = <0xe680000 0x0780000>;
read-only;
};
};
&wifi0 {
nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
&wifi1 {
nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
&art {
macaddr_art_c: macaddr@c {
reg = <0xc 0x6>;
};
};

14
target/linux/ipq806x/image/generic.mk
View File

@ -320,6 +320,20 @@ define Device/netgear_r7800
endef
TARGET_DEVICES += netgear_r7800
define Device/netgear_xr450
$(call Device/DniImage)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := Nighthawk XR450
SOC := qcom-ipq8065
KERNEL_SIZE := 4096k
NETGEAR_BOARD_ID := XR450
NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ramoops
endef
TARGET_DEVICES += netgear_xr450
define Device/netgear_xr500
$(call Device/DniImage)
DEVICE_VENDOR := NETGEAR