diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 12061eadf5..c8b1e12ea3 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -9,9 +9,6 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:01:00.0.bin")
 	case "$board" in
-	glinet,gl-b2200)
-		caldata_extract "ART" 0x9000 0x2f20
-		;;
 	meraki,mr33)
 		caldata_extract_ubi "ART" 0x9000 0x844
 		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
@@ -37,11 +34,6 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x9000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
-		;;
-	engenius,eap2200 |\
 	openmesh,a62 |\
 	plasmacloud,pa2200)
 		caldata_extract "0:ART" 0x9000 0x2f20
@@ -63,29 +55,11 @@ case "$FIRMWARE" in
 	;;
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
 	case "$board" in
-	8dev,habanero-dvk |\
-	8dev,jalapeno |\
-	alfa-network,ap120c-ac |\
-	cilab,meshpoint-one |\
-	glinet,gl-ap1300 |\
-	glinet,gl-b1300 |\
-	glinet,gl-b2200 |\
-	glinet,gl-s1300 |\
-	linksys,ea6350v3 |\
-	mobipromo,cm520-79f |\
-	p2w,r619ac-64m |\
-	p2w,r619ac-128m |\
 	qcom,ap-dk01.1-c1)
 		caldata_extract "ART" 0x1000 0x2f20
 		;;
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
-		;;
-	asus,map-ac2200 |\
-	asus,rt-ac42u |\
+	asus,map-ac2200|\
+	asus,rt-ac42u|\
 	asus,rt-ac58u)
 		caldata_extract_ubi "Factory" 0x1000 0x2f20
 		;;
@@ -102,25 +76,10 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
-		;;
-	cellc,rtl30vw |\
-	compex,wpj419 |\
-	compex,wpj428 |\
-	edgecore,ecw5211 |\
-	edgecore,oap100 |\
-	engenius,eap1300 |\
-	engenius,eap2200 |\
-	luma,wrtq-329acn|\
 	openmesh,a42 |\
 	openmesh,a62 |\
 	plasmacloud,pa1200 |\
-	plasmacloud,pa2200 |\
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2 |\
-	unielec,u4019-32m)
+	plasmacloud,pa2200)
 		caldata_extract "0:ART" 0x1000 0x2f20
 		;;
 	devolo,magic-2-wifi-next)
@@ -166,14 +125,6 @@ case "$FIRMWARE" in
 		caldata_extract_mmc "0:ART" 0x1000 0x2f20
 		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 		;;
-	netgear,wac510)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
-		;;
-	teltonika,rutx10)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
-		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
 		caldata_extract "ART" 0x1000 0x2f20
@@ -183,28 +134,10 @@ case "$FIRMWARE" in
 	;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 	case "$board" in
-	8dev,habanero-dvk |\
-	8dev,jalapeno |\
-	alfa-network,ap120c-ac |\
-	cilab,meshpoint-one |\
-	glinet,gl-ap1300 |\
-	glinet,gl-b1300 |\
-	glinet,gl-b2200 |\
-	glinet,gl-s1300 |\
-	linksys,ea6350v3 |\
-	mobipromo,cm520-79f |\
-	p2w,r619ac-64m |\
-	p2w,r619ac-128m |\
 	qcom,ap-dk01.1-c1)
 		caldata_extract "ART" 0x5000 0x2f20
 		;;
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) 1)
-		;;
-	asus,map-ac2200 |\
+	asus,map-ac2200|\
 	asus,rt-ac58u)
 		caldata_extract_ubi "Factory" 0x5000 0x2f20
 		;;
@@ -221,25 +154,10 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
-		;;
-	cellc,rtl30vw |\
-	compex,wpj419 |\
-	compex,wpj428 |\
-	edgecore,ecw5211 |\
-	edgecore,oap100 |\
-	engenius,eap1300 |\
-	engenius,eap2200 |\
-	luma,wrtq-329acn|\
 	openmesh,a42 |\
 	openmesh,a62 |\
 	plasmacloud,pa1200 |\
-	plasmacloud,pa2200 |\
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2 |\
-	unielec,u4019-32m)
+	plasmacloud,pa2200)
 		caldata_extract "0:ART" 0x5000 0x2f20
 		;;
 	devolo,magic-2-wifi-next)
@@ -286,14 +204,6 @@ case "$FIRMWARE" in
 		caldata_extract_mmc "0:ART" 0x5000 0x2f20
 		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 		;;
-	netgear,wac510)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16)
-		;;
-	teltonika,rutx10)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
-		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
 		caldata_extract "ART" 0x5000 0x2f20
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index c35ce5ccc4..b2d8aa4999 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -211,6 +211,17 @@
 				label = "ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			partition@180000 {
@@ -342,9 +353,13 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 };
 
 &wifi1 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
index cfaba0f411..a99aa90b61 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
@@ -116,15 +116,18 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
 };
 
-
 &blsp_dma {
 	status = "okay";
 };
@@ -207,6 +210,17 @@
 				label = "ART";
 				reg = <0x00160000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 			u_env@170000 {
 				label = "u_env";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
index f08ddd0abe..6a7f4e5b0f 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
@@ -188,6 +188,17 @@
 				label = "0:ART";
 				reg = <0x00180000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 			partition8@190000 {
 				compatible = "denx,fit";
@@ -226,10 +237,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
index 0ee8d1a52e..6f4d7b5f32 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
@@ -240,6 +240,17 @@
 				label = "0:ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 		};
 	};
@@ -306,11 +317,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 };
 
 &wifi1 {
 	status = "okay";
-
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
 };
 
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts
index f643882725..fa81bfbf52 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts
@@ -189,6 +189,17 @@
 				label = "ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 		};
 	};
@@ -260,10 +271,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "GL-AP1300";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "GL-AP1300";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
index 3af6de1f60..da09e53cc3 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
@@ -195,6 +195,17 @@
 				label = "ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 		};
 	};
@@ -246,13 +257,15 @@
 
 &wifi0 {
 	status = "okay";
-
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
 };
 
 &wifi1 {
 	status = "okay";
-
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
 };
 
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
index 3673a13430..ebb2d08e73 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
@@ -188,12 +188,30 @@
 				label = "0:ART";
 				reg = <0x2e0000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			config: partition@2f0000 {
 				label = "0:CONFIG";
 				reg = <0x2f0000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_config_0: macaddr@0 {
+					reg = <0x0 0x6>;
+				};
 			};
 
 			partition@300000 {
@@ -249,3 +267,15 @@
 	pinctrl-names = "default";
 	phy-reset-gpio = <&tlmm 62 0>;
 };
+
+&wifi0 {
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_1000>, <&macaddr_config_0>;
+	mac-address-increment = <2>;
+};
+
+&wifi1 {
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_5000>, <&macaddr_config_0>;
+	mac-address-increment = <3>;
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
index 20e12855f4..699e2e28b4 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
@@ -273,12 +273,30 @@
 				label = "0:MANUDATA";
 				reg = <0x001e0000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_manudata_6: macaddr@6 {
+					reg = <0x6 0x6>;
+				};
 			};
 
 			partition@1f0000 {
 				label = "0:ART";
 				reg = <0x001f0000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 		};
 	};
@@ -348,13 +366,16 @@
 
 &wifi0 {
 	status = "okay";
-
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_1000>, <&macaddr_manudata_6>;
 	qcom,ath10k-calibration-variant = "Netgear-WAC510";
 };
 
 &wifi1 {
 	status = "okay";
-
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_5000>, <&macaddr_manudata_6>;
+	mac-address-increment = <16>;
 	qcom,ath10k-calibration-variant = "Netgear-WAC510";
 };
 
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
index 2465348a82..5b0c8cf106 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
@@ -178,6 +178,17 @@
 				label = "0:ART";
 				reg = <0x170000 0x010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 		};
 	};
@@ -264,12 +275,14 @@
 
 &wifi0 {
 	status = "okay";
-
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "Luma-WRTQ-329ACN";
 };
 
 &wifi1 {
 	status = "okay";
-
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "Luma-WRTQ-329ACN";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
index 6c97cede7b..ba6aabdc9c 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
@@ -284,6 +284,25 @@
 				label = "ART";
 				reg = <0xb00000 0x80000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				macaddr_art_1006: macaddr@1006 {
+					reg = <0x1006 0x6>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+
+				macaddr_art_5006: macaddr@5006 {
+					reg = <0x5006 0x6>;
+				};
 			};
 
 			partition@b80000 {
@@ -347,24 +366,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "CM520-79F";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "CM520-79F";
 };
-
-&art {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_art_1006: macaddr@1006 {
-		reg = <0x1006 0x6>;
-	};
-
-	macaddr_art_5006: macaddr@5006 {
-		reg = <0x5006 0x6>;
-	};
-};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts
index df1df2529a..a50ee4a84e 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts
@@ -68,6 +68,17 @@
 				label = "0:ART";
 				reg = <0x170000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 			partition@180000 {
 				compatible = "denx,fit";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts
index 9348ef4eec..ce54ce9f9b 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts
@@ -68,6 +68,17 @@
 				label = "0:ART";
 				reg = <0x170000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 		};
 	};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
index 57d607849a..45681b19bb 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
@@ -257,10 +257,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
index 95e616695c..c8112c04fe 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
@@ -159,6 +159,21 @@
 				label = "0:ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+
+				precal_art_9000: precal@9000 {
+					reg = <0x9000 0x2f20>;
+				};
 			};
 		};
 	};
@@ -216,6 +231,8 @@
 		wifi2: wifi@1,0 {
 			compatible = "qcom,ath10k";
 			reg = <0x00010000 0 0 0 0>;
+			nvmem-cell-names = "pre-calibration";
+			nvmem-cells = <&precal_art_9000>;
 			ieee80211-freq-limit = <5470000 5875000>;
 			qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
 		};
@@ -272,11 +289,15 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
 };
 
 &wifi1 {
 	status = "okay";
 	ieee80211-freq-limit = <5170000 5350000>;
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
index 339a1e0f72..243dcb84d6 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
@@ -207,6 +207,21 @@
 				label = "ART";
 				reg = <0x170000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+
+				cal_art_9000: cal@9000 {
+					reg = <0x9000 0x2f20>;
+				};
 			};
 		};
 	};
@@ -348,6 +363,9 @@
 			status = "okay";
 			compatible = "qcom,ath10k";
 			reg = <0x00010000 0 0 0 0>;
+			 /* vendor said 9886 wave-2? Is this correct? */
+			nvmem-cell-names = "calibration";
+			nvmem-cells = <&cal_art_9000>;
 			qcom,ath10k-calibration-variant = "GL-B2200";
 		};
 	};
@@ -355,10 +373,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "GL-B2200";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "GL-B2200";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
index 49cf2cabfa..2a2cfb9ac2 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
@@ -284,6 +284,17 @@
 				label = "ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 			partition@180000 {
 				label = "cfg";
@@ -334,13 +345,15 @@
 
 &wifi0 {
 	status = "okay";
-
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "8devices-Habanero";
 };
 
 &wifi1 {
 	status = "okay";
-
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "8devices-Habanero";
 };
 
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts
index 69423ce02b..bdcc31fef7 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts
@@ -278,6 +278,17 @@
 				label = "0:ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 		};
 	};
@@ -318,11 +329,15 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "Edgecore OAP100";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "Edgecore OAP100";
 };
 
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
index 41294e1931..33be77ec36 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
@@ -186,6 +186,17 @@
 				label = "ART";
 				reg = <0x170000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 		};
 	};
@@ -340,10 +351,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "P&W R619AC";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "P&W R619AC";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
index 0caa0255d0..dcbe95c526 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
@@ -267,6 +267,17 @@
 				label = "0:ART";
 				reg = <0x170000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			partition@180000 {
@@ -376,10 +387,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "cellc,rtl30vw";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "cellc,rtl30vw";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts
index 811c82b9c5..4efcdaf394 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts
@@ -65,6 +65,17 @@
 				label = "0:ART";
 				reg = <0x170000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 			partition@180000 {
 				compatible = "denx,fit";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
index 4435d1fd28..ece80571bd 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
@@ -217,8 +217,12 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
index fe329c1d43..09cbfaca91 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
@@ -206,6 +206,17 @@
 						label = "0:ART";
 						reg = <0x170000 0x010000>;
 						read-only;
+						compatible = "nvmem-cells";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						precal_art_1000: precal@1000 {
+							reg = <0x1000 0x2f20>;
+						};
+
+						precal_art_5000: precal@5000 {
+							reg = <0x5000 0x2f20>;
+						};
 					};
 				};
 			};
@@ -378,8 +389,12 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
index fb0cec59f7..1f8c830d90 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
@@ -254,7 +254,8 @@
 		wifi@0,0 {
 			compatible = "qcom,ath10k";
 			reg = <0 0 0 0 0>;
-
+			nvmem-cell-names = "pre-calibration", "mac-address";
+			nvmem-cells = <&precal_art_9000>, <&macaddr_orgdata_32>;
 			qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP";
 		};
 	};
@@ -340,10 +341,25 @@
 				read-only;
 			};
 
-			art: partition@b00000 {
+			partition@b00000 {
 				label = "ART";
 				reg = <0x0b00000 0x0080000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+
+				precal_art_9000: precal@9000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			partition@b80000 {
@@ -356,6 +372,22 @@
 				label = "ORGDATA";
 				reg = <0x0c00000 0x0080000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_orgdata_20: macaddr@20 {
+					reg = <0x20 0x6>;
+				};
+				macaddr_orgdata_26: macaddr@26 {
+					reg = <0x26 0x6>;
+				};
+				macaddr_orgdata_2c: macaddr@2c {
+					reg = <0x2c 0x6>;
+				};
+				macaddr_orgdata_32: macaddr@32 {
+					reg = <0x32 0x6>;
+				};
 			};
 
 			partition@c80000 {
@@ -386,12 +418,16 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_1000>, <&macaddr_orgdata_26>;
 	qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP";
 	ieee80211-freq-limit = <2400000 2483000>;
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_5000>, <&macaddr_orgdata_2c>;
 	qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP";
 };
 
@@ -419,13 +455,3 @@
 &usb3_hs_phy {
 	status = "okay";
 };
-
-&orgdata {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_orgdata_20: macaddr@20 {
-		reg = <0x20 0x6>;
-	};
-};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
index 79f4c04edf..3892c9bd81 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
@@ -231,6 +231,17 @@
 				label = "0:ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 			partition6@180000 {
 				compatible = "denx,fit";
@@ -281,8 +292,12 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
index 13f89d810c..6cbfa8f37d 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
@@ -118,6 +118,17 @@
 				label = "ART";
 				reg = <0xe0000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			partition@f0000 {
@@ -130,6 +141,13 @@
 				label = "mfginfo";
 				reg = <0x1e0000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_mfginfo_1d: macaddr@1d {
+					reg = <0x1d 0x6>;
+				};
 			};
 
 			partition@1f0000 {
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
index 707ed18e3b..201ce97cd9 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
@@ -325,6 +325,17 @@
 				label = "ART";
 				reg = <0x1f0000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			partition@1f0000 {
@@ -349,6 +360,13 @@
 				label = "mfginfo";
 				reg = <0x390000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_mfginfo_1d: macaddr@1d {
+					reg = <0x1d 0x6>;
+				};
 			};
 
 			partition@3a0000 {
@@ -413,9 +431,16 @@
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "Aruba-AP-303";
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_1000>, <&macaddr_mfginfo_1d>;
+	qcom,ath10k-calibration-variant = "Aruba-AP-303";
 };
 
 &wifi1 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "Aruba-AP-303";
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_5000>, <&macaddr_mfginfo_1d>;
+	mac-address-increment = <1>;
+	qcom,ath10k-calibration-variant = "Aruba-AP-303";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
index 988a4421b5..0bc46d7e7e 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
@@ -150,6 +150,17 @@
 				label = "ART";
 				reg = <0x1f0000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			partition@200000 {
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
index 9d0823f3ef..0b94aafc83 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -242,10 +242,15 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_1000>, <&macaddr_mfginfo_1d>;
 	qcom,ath10k-calibration-variant = "Aruba-AP-303";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_5000>, <&macaddr_mfginfo_1d>;
+	mac-address-increment = <1>;
 	qcom,ath10k-calibration-variant = "Aruba-AP-303";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
index a735d8e3ac..6e087ba024 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
@@ -208,6 +208,17 @@
 				label = "ART";
 				reg = <0x170000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			firmware@180000 {
@@ -271,10 +282,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "GL-B1300";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "GL-B1300";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts
index fa859b73a3..e9490c2690 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts
@@ -207,6 +207,17 @@
 				label = "ART";
 				reg = <0x170000 0x10000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			firmware@180000 {
@@ -347,10 +358,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "GL-S1300";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "GL-S1300";
 };