diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 6c6d04a923..b98c85decf 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -73,7 +73,8 @@ ipq40xx_setup_interfaces()
 	netgear,srs60)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
 		;;
-	openmesh,a42)
+	openmesh,a42|\
+	openmesh,a62)
 		ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
 		;;
 	zte,mf286d)
@@ -162,7 +163,8 @@ ipq40xx_setup_macs()
 	pakedge,wr-1)
 		wan_mac=$(macaddr_add $(get_mac_label) 1)
 		;;
-	openmesh,a42)
+	openmesh,a42|\
+	openmesh,a62)
 		label_mac="$(mtd_get_mac_binary "0:ART" 0x0)"
 		;;
 	esac
diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
index 4ae4103131..0d19c6bae0 100644
--- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
+++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
@@ -29,7 +29,8 @@ preinit_set_mac_address() {
 		ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
 		ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
 		;;
-	openmesh,a42)
+	openmesh,a42|\
+	openmesh,a62)
 		ip link set dev ethernet1 address $(mtd_get_mac_binary "0:ART" 0x0)
 		ip link set dev ethernet2 address $(mtd_get_mac_binary "0:ART" 0x6)
 		;;
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
index 799e3cb415..11d27ab339 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
@@ -17,10 +17,6 @@
 			status = "okay";
 		};
 
-		mdio@90000 {
-			status = "okay";
-		};
-
 		tcsr@194b000 {
 			/* select hostmode */
 			compatible = "qcom,tcsr";
@@ -194,6 +190,28 @@
 	};
 };
 
+&mdio {
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+	label = "ethernet1";
+};
+
+&swport5 {
+	status = "okay";
+	label = "ethernet2";
+};
+
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "OM-A62";
diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index 14a2745719..9553931676 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -904,8 +904,7 @@ define Device/openmesh_a62
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += openmesh_a62
+TARGET_DEVICES += openmesh_a62
 
 define Device/p2w_r619ac
 	$(call Device/FitzImage)