1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-18 13:29:16 +02:00

ath79: support MikroTik RouterBOARD 911G-5HPacD

The MikroTik RouterBOARD 911G-5HPacD is a stripped-down version of
RB921GS-5HPacD, removing the SFP cage.
This ports the board from ar71xx, and is based on support for
RB921GS-5HPacD.

Disable mdio1 and eth1 nodes in routerboard-92x.dtsi, then re-enable
them in devices using that, so the newly-added device has the port
disabled properly.

See https://mikrotik.com/product/RB911G-5HPacD for more info.

Specifications:
 - SoC: Qualcomm Atheros QCA9558 (720 MHz)
 - RAM: 128 MB
 - Storage: 128 MB NAND
 - Wireless: external QCA9892 802.11a/ac 2x2:2
 - Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE in

Working:
 - NAND storage detection
 - Ethernet
 - Wireless
 - 1x user LED (blinks during boot, sysupgrade)
 - Reset button
 - Sysupgrade

Installation:
 - Boot initramfs image via TFTP and then flash sysupgrade image

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
This commit is contained in:
Lech Perczak 2023-11-18 16:54:59 +01:00 committed by Hauke Mehrtens
parent 95b6d76c5a
commit c2ab56a754
8 changed files with 57 additions and 4 deletions

@ -0,0 +1,29 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9558_mikrotik_routerboard-92x.dtsi"
/ {
compatible = "mikrotik,routerboard-911g-5hpacd", "qca,qca9558";
model = "MikroTik RouterBOARD 911G-5HPacD";
ath10k-leds {
compatible = "gpio-leds";
wlan5g {
label = "green:wlan5g";
gpios = <&ath10k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&pcie1 {
status = "okay";
ath10k: wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
};
};

@ -17,6 +17,14 @@
};
};
&mdio1 {
status = "okay";
};
&eth1 {
status = "okay";
};
&pcie1 {
status = "okay";

@ -25,6 +25,14 @@
};
};
&mdio1 {
status = "okay";
};
&eth1 {
status = "okay";
};
&pcie0 {
status = "okay";

@ -86,8 +86,6 @@
};
&mdio1 {
status = "okay";
phy_sfp: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
@ -96,8 +94,6 @@
};
&eth1 {
status = "okay";
phy-handle = <&phy_sfp>;
pll-data = <0x03000000 0x00000101 0x00001616>;
qca955x-sgmii-fixup;

@ -50,6 +50,15 @@ define Device/mikrotik_routerboard-912uag-2hpnd
endef
TARGET_DEVICES += mikrotik_routerboard-912uag-2hpnd
define Device/mikrotik_routerboard-911g-5hpacd
$(Device/mikrotik_nand)
SOC := qca9558
DEVICE_MODEL := RouterBOARD 911G-5HPacD
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
SUPPORTED_DEVICES += rb-921gs-5hpacd-r2
endef
TARGET_DEVICES += mikrotik_routerboard-911g-5hpacd
define Device/mikrotik_routerboard-921gs-5hpacd-15s
$(Device/mikrotik_nand)
SOC := qca9558

@ -62,6 +62,7 @@ ath79_setup_macs()
case "$board" in
mikrotik,routerboard-911-lite|\
mikrotik,routerboard-911g-5hpacd|\
mikrotik,routerboard-911g-xhpnd|\
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-lhg-2nd|\

@ -11,6 +11,7 @@ board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
mikrotik,routerboard-911g-5hpacd|\
mikrotik,routerboard-921gs-5hpacd-15s|\
mikrotik,routerboard-951ui-2nd|\
mikrotik,routerboard-952ui-5ac2nd|\

@ -30,6 +30,7 @@ platform_do_upgrade() {
case "$board" in
mikrotik,routerboard-493g|\
mikrotik,routerboard-911g-5hpacd|\
mikrotik,routerboard-911g-xhpnd|\
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-921gs-5hpacd-15s|\