1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-08 07:49:21 +01:00

rockchip: add support for nanopc t6

SoC: Rockchip RK3588
CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz)
GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2
VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder
NPU: 6TOPs, supports INT4/INT8/INT16/FP16
RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz
Flash: 32GB/64GB/256GB eMMC, at HS400 mode
microSD: support up to SDR104 mode
Ethernet: 2x PCIe 2.5G Ethernet

Signed-off-by: xiaobo tian <peterwillcn@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16158
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
xiaobo tian 2024-08-21 14:40:27 +08:00 committed by Hauke Mehrtens
parent da502be941
commit 9482341a47
6 changed files with 62 additions and 10 deletions

@ -230,6 +230,13 @@ define U-Boot/rock5b-rk3588
radxa_rock-5b
endef
define U-Boot/nanopc-t6-rk3588
$(U-Boot/rk3588/Default)
NAME:=NanoPC T6
BUILD_DEVICES:= \
friendlyarm_nanopc-t6
endef
# RK3588S boards
@ -269,6 +276,7 @@ UBOOT_TARGETS := \
radxa-e25-rk3568 \
rock-3a-rk3568 \
rock5b-rk3588 \
nanopc-t6-rk3588 \
nanopi-r6s-rk3588s \
rock5a-rk3588s

@ -7,6 +7,11 @@ rockchip_setup_interfaces()
local board="$1"
case "$board" in
friendlyarm,nanopc-t6|\
friendlyarm,nanopi-r5c|\
radxa,e25)
ucidef_set_interfaces_lan_wan 'eth0' 'eth1'
;;
friendlyarm,nanopi-r2c|\
friendlyarm,nanopi-r2c-plus|\
friendlyarm,nanopi-r2s|\
@ -17,10 +22,6 @@ rockchip_setup_interfaces()
xunlong,orangepi-r1-plus-lts)
ucidef_set_interfaces_lan_wan 'eth1' 'eth0'
;;
friendlyarm,nanopi-r5c|\
radxa,e25)
ucidef_set_interfaces_lan_wan 'eth0' 'eth1'
;;
friendlyarm,nanopi-r5s)
ucidef_set_interfaces_lan_wan 'eth1 eth2' 'eth0'
;;
@ -44,6 +45,7 @@ rockchip_setup_macs()
local label_mac=""
case "$board" in
friendlyarm,nanopc-t6|\
friendlyarm,nanopi-r2c|\
friendlyarm,nanopi-r2s)
wan_mac=$(macaddr_generate_from_mmc_cid mmcblk0)

@ -29,6 +29,13 @@ set_interface_core() {
}
case "$(board_name)" in
friendlyarm,nanopc-t6|\
friendlyarm,nanopi-r5c|\
radxa,e25|\
sinovoip,rk3568-bpi-r2pro)
set_interface_core 2 "eth0"
set_interface_core 4 "eth1"
;;
friendlyarm,nanopi-r2c|\
friendlyarm,nanopi-r2c-plus|\
friendlyarm,nanopi-r2s|\
@ -43,12 +50,6 @@ friendlyarm,nanopi-r4s-enterprise)
set_interface_core 10 "eth0"
set_interface_core 20 "eth1"
;;
friendlyarm,nanopi-r5c|\
radxa,e25|\
sinovoip,rk3568-bpi-r2pro)
set_interface_core 2 "eth0"
set_interface_core 4 "eth1"
;;
friendlyarm,nanopi-r5s|\
friendlyarm,nanopi-r6s)
set_interface_core 2 "eth0"

@ -22,6 +22,14 @@ define Device/friendlyarm_nanopc-t4
endef
TARGET_DEVICES += friendlyarm_nanopc-t4
define Device/friendlyarm_nanopc-t6
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPC T6
SOC := rk3588
DEVICE_PACKAGES := kmod-r8169
endef
TARGET_DEVICES += friendlyarm_nanopc-t6
define Device/friendlyarm_nanopi-r2c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2C

@ -0,0 +1,22 @@
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -19,6 +19,10 @@
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
+ led-boot = &sys_led;
+ led-failsafe = &sys_led;
+ led-running = &sys_led;
+ led-upgrade = &sys_led;
};
chosen {
@@ -31,7 +35,7 @@
sys_led: led-0 {
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
label = "system-led";
- linux,default-trigger = "heartbeat";
+ default-state = "on";
pinctrl-names = "default";
pinctrl-0 = <&sys_led_pin>;
};

@ -0,0 +1,11 @@
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -547,7 +547,7 @@
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
- sd-uhs-sdr104;
+ sd-uhs-sdr50;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";