mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-10-19 05:58:53 +02:00
mediatek: filogic: add support for Ubiquiti UniFi 6 Plus (U6+)
Ubiquiti U6+ is a dual-band WiFi 6 PoE access point.
It is a drop-in upgrade of the U6 lite.
Specifications
---
- SoC: MediaTek MT7981A dual-core ARM Cortex-A53 1.3 GHz
- RAM: 256 MB DDR3-2133 RAM
- Flash: 16 MB SPI NOR and 4 GB eMMC
- LAN: 1x Gigabit Ethernet with 802.3af/at support
- WLAN: MediaTek MT7976C 2x2 MIMO dual-band WiFi 6
- LEDs: 1x blue and 1x white
- Buttons: 1x reset button
Installation
---
1. Power device using a PoE injector or switch
2. Connect via Ethernet to the device with static IP 192.168.1.2
3. SSH into the device with password: ubnt
$ ssh ubnt@192.168.1.20
4. Unlock kernel partitions for writing
$ echo 5edfacbf > /proc/ubnthal/.uf
5. Confirm correct partitions
$ grep PARTNAME /sys/block/mmcblk0/mmcblk0p6/uevent
PARTNAME=kernel0
$ grep PARTNAME /sys/block/mmcblk0/mmcblk0p7/uevent
PARTNAME=kernel1
$ grep PARTNAME /sys/block/mmcblk0/mmcblk0p8/uevent
PARTNAME=bs
6. Set and confirm bootloader environment
$ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr); fdt rm /signature; bootubnt"
$ fw_setenv bootcmd_real "run boot_openwrt"
$ fw_printenv
7. Copy sysupgrade image to /tmp/openwrt.bin via scp
8. Copy kernel and rootfs to mmcblk0p6 and mmcblk0p7, respectively
$ tar xf /tmp/openwrt.bin sysupgrade-ubnt_unifi-6-plus/kernel -O | dd of=/dev/mmcblk0p6
$ tar xf /tmp/openwrt.bin sysupgrade-ubnt_unifi-6-plus/root -O | dd of=/dev/mmcblk0p7
9. Ensure device boots from mmcblk0p6
$ echo -ne "\x00\x00\x00\x00\x2b\xe8\x4d\xa3" > /dev/mmcblk0p8
10. Reboot the device
$ reboot
Signed-off-by: Elbert Mai <code@elbertmai.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
This commit is contained in:
Elbert Mai
Hauke Mehrtens
parent
03123a3ae5
commit
75ee5546e9
@ -48,6 +48,9 @@ cetron,ct3003|\
|
||||
netgear,wax220)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
||||
;;
|
||||
ubnt,unifi-6-plus)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
|
||||
;;
|
||||
xiaomi,mi-router-wr30u-112m-nmbm|\
|
||||
xiaomi,mi-router-wr30u-stock|\
|
||||
xiaomi,redmi-router-ax6000-stock)
|
||||
|
||||
168
target/linux/mediatek/dts/mt7981a-ubnt-unifi-6-plus.dts
Normal file
168
target/linux/mediatek/dts/mt7981a-ubnt-unifi-6-plus.dts
Normal file
@ -0,0 +1,168 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Ubiquiti UniFi 6 Plus";
|
||||
compatible = "ubnt,unifi-6-plus", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
led-boot = &led_white;
|
||||
led-failsafe = &led_white;
|
||||
led-running = &led_blue;
|
||||
led-upgrade = &led_blue;
|
||||
label-mac-device = &gmac1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-override = "console=ttyS0,115200n8 rootwait root=/dev/mmcblk0p7";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_blue: dome-blue {
|
||||
label = "blue:dome";
|
||||
gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_white: dome-white {
|
||||
label = "white:dome";
|
||||
gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi2_flash_pins: spi2-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi2", "spi2_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up = <103>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down = <103>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins_default: mmc0-pins-default {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "emmc_45";
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins_uhs: mmc0-pins-uhs {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "emmc_45";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom: partition@00000 {
|
||||
label = "EEPROM";
|
||||
reg = <0x00000 0x10000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_eeprom_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_eeprom_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@10000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x10000 0x80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc0_pins_default>;
|
||||
pinctrl-1 = <&mmc0_pins_uhs>;
|
||||
bus-width = <8>;
|
||||
max-frequency = <52000000>;
|
||||
cap-mmc-highspeed;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
status = "okay";
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_eeprom_0>;
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
};
|
||||
@ -16,6 +16,7 @@ mediatek_setup_interfaces()
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
|
||||
;;
|
||||
netgear,wax220|\
|
||||
ubnt,unifi-6-plus|\
|
||||
zyxel,nwa50ax-pro)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
|
||||
@ -14,6 +14,13 @@ case "$FIRMWARE" in
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"mediatek/mt7981_eeprom_mt7976_dbdc.bin")
|
||||
case "$board" in
|
||||
ubnt,unifi-6-plus)
|
||||
caldata_extract_mmc "factory" 0x0 0x1000
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"mediatek/mt7986_eeprom_mt7976.bin")
|
||||
case "$board" in
|
||||
acer,predator-w6)
|
||||
|
||||
@ -58,6 +58,11 @@ case "$board" in
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
ubnt,unifi-6-plus)
|
||||
addr=$(mtd_get_mac_binary EEPROM 0x6)
|
||||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
qihoo,360t7)
|
||||
addr=$(mtd_get_mac_ascii factory lanMac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
|
||||
@ -88,6 +88,11 @@ platform_do_upgrade() {
|
||||
CI_UBIPART="ubi0"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
ubnt,unifi-6-plus)
|
||||
CI_KERNPART="kernel0"
|
||||
EMMC_ROOT_DEV="$(cmdline_get_var root)"
|
||||
emmc_do_upgrade "$1"
|
||||
;;
|
||||
h3c,magic-nx30-pro|\
|
||||
mediatek,mt7981-rfb|\
|
||||
qihoo,360t7|\
|
||||
@ -145,6 +150,9 @@ platform_copy_config() {
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
ubnt,unifi-6-plus)
|
||||
emmc_copy_config
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
|
||||
@ -521,6 +521,16 @@ define Device/tplink_tl-xdr6088
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-xdr6088
|
||||
|
||||
define Device/ubnt_unifi-6-plus
|
||||
DEVICE_VENDOR := Ubiquiti
|
||||
DEVICE_MODEL := UniFi 6 Plus
|
||||
DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += ubnt_unifi-6-plus
|
||||
|
||||
define Device/xiaomi_mi-router-wr30u-112m-nmbm
|
||||
DEVICE_VENDOR := Xiaomi
|
||||
DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user