mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-10-18 21:48:23 +02:00
ath79: add support for ZyXEL NWA1121-NI
Specifications: * AR9342, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R, 2.4 GHz * 1x Gigabit Ethernet (AR8035), 802.3af PoE Installation: * OEM Web UI is at 192.168.1.2 login as `admin` with password `1234` * Flash factory-AABJ.bin The string `AABJ` needs to be present within the file name of the uploaded image to be accepted by the OEM Web-based updater, the factory image is named accordingly to save the user from the hassle of manual renaming. TFTP Recovery: * Open the case, connect to TTL UART port (this is the official method described by Zyxel, the reset button is useless during power-on) * Extract factory image (.tar.bz2), serve `vmlinux_mi124_f1e.lzma.uImage` and `mi124_f1e-jffs2` via tftp at 192.168.1.10 * Interrupt uboot countdown, execute commands `run lk` `run lf` to flash the kernel / filesystem accordingly MAC addresses as verified by OEM firmware: use address source LAN *:cc mib0 0x30 ('eth0mac'), art 0x1002 (label) 2g *:cd mib0 0x4b ('wifi0mac') Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
parent
3b2f19271c
commit
251ecfe379
31
target/linux/ath79/dts/ar9342_zyxel_nwa1121-ni.dts
Normal file
31
target/linux/ath79/dts/ar9342_zyxel_nwa1121-ni.dts
Normal file
@ -0,0 +1,31 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
#include "ar9342_zyxel_nwa11xx.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "zyxel,nwa1121-ni", "qca,ar9342";
|
||||||
|
model = "Zyxel NWA1121-NI";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
label-mac-device = ð0;
|
||||||
|
led-boot = &led_status_green;
|
||||||
|
led-failsafe = &led_status_amber;
|
||||||
|
led-running = &led_status_green;
|
||||||
|
led-upgrade = &led_status_amber;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
led_status_green: status_green {
|
||||||
|
label = "green:status";
|
||||||
|
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||||
|
default-state = "on";
|
||||||
|
};
|
||||||
|
|
||||||
|
led_status_amber: status_amber {
|
||||||
|
label = "amber:status";
|
||||||
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
166
target/linux/ath79/dts/ar9342_zyxel_nwa11xx.dtsi
Normal file
166
target/linux/ath79/dts/ar9342_zyxel_nwa11xx.dtsi
Normal file
@ -0,0 +1,166 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
#include "ar9344.dtsi"
|
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
#include <dt-bindings/mtd/partitions/uimage.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
keys {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
|
||||||
|
reset {
|
||||||
|
label = "reset";
|
||||||
|
linux,code = <KEY_RESTART>;
|
||||||
|
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
virtual_flash {
|
||||||
|
compatible = "mtd-concat";
|
||||||
|
|
||||||
|
devices = <&fwconcat0 &fwconcat1>;
|
||||||
|
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
compatible = "openwrt,uimage", "denx,uimage";
|
||||||
|
openwrt,ih-magic = <IH_MAGIC_OKLI>;
|
||||||
|
label = "firmware";
|
||||||
|
reg = <0x0 0x0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&ref {
|
||||||
|
clock-frequency = <40000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
flash@0 {
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <50000000>;
|
||||||
|
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
label = "u-boot";
|
||||||
|
reg = <0x000000 0x040000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@40000 {
|
||||||
|
label = "u-boot-env";
|
||||||
|
reg = <0x040000 0x010000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
fwconcat0: partition@50000 {
|
||||||
|
label = "fwconcat0";
|
||||||
|
reg = <0x050000 0x800000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@850000 {
|
||||||
|
label = "loader";
|
||||||
|
reg = <0x850000 0x010000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
fwconcat1: partition@860000 {
|
||||||
|
label = "fwconcat1";
|
||||||
|
reg = <0x860000 0x740000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@fa0000 {
|
||||||
|
label = "config";
|
||||||
|
reg = <0xfa0000 0x040000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@fe0000 {
|
||||||
|
label = "mib0";
|
||||||
|
reg = <0xfe0000 0x010000>;
|
||||||
|
read-only;
|
||||||
|
|
||||||
|
compatible = "nvmem-cells";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
macaddr_mib0_4b: macaddr@4b {
|
||||||
|
reg = <0x4b 0x11>;
|
||||||
|
};
|
||||||
|
|
||||||
|
macaddr_mib0_66: macaddr@66 {
|
||||||
|
reg = <0x66 0x11>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
art: partition@ff0000 {
|
||||||
|
label = "art";
|
||||||
|
reg = <0xff0000 0x010000>;
|
||||||
|
read-only;
|
||||||
|
|
||||||
|
compatible = "nvmem-cells";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
calibration_ath9k: calibration@1000 {
|
||||||
|
reg = <0x1000 0x440>;
|
||||||
|
};
|
||||||
|
|
||||||
|
macaddr_art_1002: macaddr@1002 {
|
||||||
|
reg = <0x1002 0x6>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&mdio0 {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
phy0: ethernet-phy@0 {
|
||||||
|
reg = <0>;
|
||||||
|
phy-mode = "rgmii";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
ð0 {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
pll-data = <0x06000000 0x00000101 0x00001313>;
|
||||||
|
|
||||||
|
nvmem-cells = <&macaddr_art_1002>;
|
||||||
|
nvmem-cell-names = "mac-address";
|
||||||
|
|
||||||
|
phy-mode = "rgmii-id";
|
||||||
|
phy-handle = <&phy0>;
|
||||||
|
|
||||||
|
gmac-config {
|
||||||
|
device = <&gmac>;
|
||||||
|
rxdv-delay = <3>;
|
||||||
|
rxd-delay = <3>;
|
||||||
|
txen-delay = <3>;
|
||||||
|
txd-delay = <3>;
|
||||||
|
rgmii-gmac0 = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&wmac {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
ieee80211-freq-limit = <2402000 2482000>;
|
||||||
|
|
||||||
|
nvmem-cells = <&macaddr_mib0_4b>, <&calibration_ath9k>;
|
||||||
|
nvmem-cell-names = "mac-address-ascii", "calibration";
|
||||||
|
};
|
@ -109,7 +109,8 @@ ath79_setup_interfaces()
|
|||||||
ubnt,unifiac-mesh|\
|
ubnt,unifiac-mesh|\
|
||||||
ubnt,unifi|\
|
ubnt,unifi|\
|
||||||
wd,mynet-wifi-rangeextender|\
|
wd,mynet-wifi-rangeextender|\
|
||||||
winchannel,wb2000)
|
winchannel,wb2000|\
|
||||||
|
zyxel,nwa1121-ni)
|
||||||
ucidef_set_interface_lan "eth0"
|
ucidef_set_interface_lan "eth0"
|
||||||
;;
|
;;
|
||||||
airtight,c-75)
|
airtight,c-75)
|
||||||
|
@ -9,7 +9,7 @@ DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
|
|||||||
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
|
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
|
||||||
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE
|
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE
|
||||||
DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL
|
DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL
|
||||||
DEVICE_VARS += OPENMESH_CE_TYPE
|
DEVICE_VARS += OPENMESH_CE_TYPE ZYXEL_MODEL_STRING
|
||||||
|
|
||||||
define Build/add-elecom-factory-initramfs
|
define Build/add-elecom-factory-initramfs
|
||||||
$(eval edimax_model=$(word 1,$(1)))
|
$(eval edimax_model=$(word 1,$(1)))
|
||||||
@ -161,6 +161,13 @@ define Build/wrgg-pad-rootfs
|
|||||||
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
|
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
define Build/zyxel-tar-bz2
|
||||||
|
mkdir -p $@.tmp
|
||||||
|
mv $@ $@.tmp/$(word 2,$(1))
|
||||||
|
cp $(KDIR)/loader-$(DEVICE_NAME).uImage $@.tmp/$(word 1,$(1)).lzma.uImage
|
||||||
|
$(TAR) -cjf $@ -C $@.tmp .
|
||||||
|
rm -rf $@.tmp
|
||||||
|
endef
|
||||||
|
|
||||||
define Device/seama
|
define Device/seama
|
||||||
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
|
||||||
@ -2687,6 +2694,28 @@ define Device/zbtlink_zbt-wd323
|
|||||||
endef
|
endef
|
||||||
TARGET_DEVICES += zbtlink_zbt-wd323
|
TARGET_DEVICES += zbtlink_zbt-wd323
|
||||||
|
|
||||||
|
define Device/zyxel_nwa11xx
|
||||||
|
$(Device/loader-okli-uimage)
|
||||||
|
SOC := ar9342
|
||||||
|
DEVICE_VENDOR := ZyXEL
|
||||||
|
LOADER_FLASH_OFFS := 0x050000
|
||||||
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
||||||
|
IMAGE_SIZE := 8192k
|
||||||
|
IMAGES += factory-$$$$(ZYXEL_MODEL_STRING).bin
|
||||||
|
IMAGE/factory-$$$$(ZYXEL_MODEL_STRING).bin := \
|
||||||
|
append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
||||||
|
pad-rootfs | pad-to 8192k | check-size | zyxel-tar-bz2 \
|
||||||
|
vmlinux_mi124_f1e mi124_f1e-jffs2 | append-md5sum-bin
|
||||||
|
endef
|
||||||
|
|
||||||
|
define Device/zyxel_nwa1121-ni
|
||||||
|
$(Device/zyxel_nwa11xx)
|
||||||
|
DEVICE_MODEL := NWA1121
|
||||||
|
DEVICE_VARIANT := NI
|
||||||
|
ZYXEL_MODEL_STRING := AABJ
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += zyxel_nwa1121-ni
|
||||||
|
|
||||||
define Device/zyxel_nbg6616
|
define Device/zyxel_nbg6616
|
||||||
SOC := qca9557
|
SOC := qca9557
|
||||||
DEVICE_VENDOR := ZyXEL
|
DEVICE_VENDOR := ZyXEL
|
||||||
|
Loading…
Reference in New Issue
Block a user