mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-11-18 22:43:53 +01:00
Added gpio and led drivers for 2.6.25.10 kernel
SVN-Revision: 11745
This commit is contained in:
Hamish Guthrie
parent
efd3eac055
commit
22754b63e7
@ -50,7 +50,7 @@ CONFIG_ARCH_SUPPORTS_AOUT=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARM_AT91_ETHER=m
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
CONFIG_ARM_THUMB=y
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_ARTHUR is not set
|
||||
@ -66,6 +66,7 @@ CONFIG_AT91_PMC_UNIT=y
|
||||
CONFIG_AT91_SPI=y
|
||||
# CONFIG_AT91_SPIDEV is not set
|
||||
CONFIG_AT91_TIMER_HZ=128
|
||||
CONFIG_AT91_VLIO=y
|
||||
# CONFIG_ATMEL_PWM is not set
|
||||
# CONFIG_ATMEL_SSC is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
@ -77,6 +78,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
# CONFIG_BLK_DEV_XIP is not set
|
||||
# CONFIG_BONDING is not set
|
||||
CONFIG_BOUNCE=y
|
||||
# CONFIG_BROADCOM_PHY is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_CLASSIC_RCU=y
|
||||
@ -97,11 +99,13 @@ CONFIG_CRYPTO_AEAD=m
|
||||
CONFIG_CRYPTO_AUTHENC=m
|
||||
CONFIG_CRYPTO_GF128MUL=m
|
||||
# CONFIG_DATAFLASH_ALWAYS_ADD_DEVICE is not set
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
# CONFIG_E1000E_ENABLED is not set
|
||||
# CONFIG_FIXED_PHY is not set
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
CONFIG_FPE_NWFPE=y
|
||||
# CONFIG_FPE_NWFPE_XP is not set
|
||||
@ -133,9 +137,7 @@ CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_INPUT=y
|
||||
CONFIG_LEDS=y
|
||||
# CONFIG_LEDS_ALIX is not set
|
||||
CONFIG_LEDS_CPU=y
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=32
|
||||
# CONFIG_LLC2 is not set
|
||||
@ -157,7 +159,7 @@ CONFIG_LZO_DECOMPRESS=m
|
||||
# CONFIG_MACH_SWEDATMS is not set
|
||||
# CONFIG_MACH_TT9200 is not set
|
||||
CONFIG_MACH_VLINK=y
|
||||
CONFIG_MII=m
|
||||
# CONFIG_MDIO_BITBANG is not set
|
||||
CONFIG_MMC=m
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_MMC_BLOCK=m
|
||||
@ -205,6 +207,7 @@ CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_NET_IPGRE_BROADCAST is not set
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
# CONFIG_NF_CONNTRACK_AMANDA is not set
|
||||
# CONFIG_NF_CONNTRACK_PPTP is not set
|
||||
# CONFIG_NF_CONNTRACK_RTSP is not set
|
||||
@ -217,10 +220,13 @@ CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_OUTER_CACHE is not set
|
||||
# CONFIG_PCI_SYSCALL is not set
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PPPOATM is not set
|
||||
# CONFIG_PPPOL2TP is not set
|
||||
# CONFIG_PPP_MULTILINK is not set
|
||||
# CONFIG_PPP_SYNC_TTY is not set
|
||||
# CONFIG_QSEMI_PHY is not set
|
||||
# CONFIG_REALTEK_PHY is not set
|
||||
CONFIG_RTC_LIB=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
@ -236,6 +242,7 @@ CONFIG_SERIO_RAW=y
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
CONFIG_SLABINFO=y
|
||||
# CONFIG_SMC91X is not set
|
||||
# CONFIG_SMSC_PHY is not set
|
||||
# CONFIG_SOUND is not set
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||
|
||||
171
target/linux/at91/patches-2.6.25/002-led-driver.patch
Normal file
171
target/linux/at91/patches-2.6.25/002-led-driver.patch
Normal file
@ -0,0 +1,171 @@
|
||||
diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.25.10/arch/arm/mach-at91/at91rm9200_devices.c
|
||||
--- linux-2.6.25.10.old/arch/arm/mach-at91/at91rm9200_devices.c 2008-07-06 09:01:53.000000000 +0200
|
||||
+++ linux-2.6.25.10/arch/arm/mach-at91/at91rm9200_devices.c 2008-07-06 09:47:54.000000000 +0200
|
||||
@@ -717,6 +717,26 @@
|
||||
static void __init at91_add_device_watchdog(void) {}
|
||||
#endif
|
||||
|
||||
+/* --------------------------------------------------------------------
|
||||
+ * LEDs
|
||||
+ * -------------------------------------------------------------------- */
|
||||
+
|
||||
+#if defined(CONFIG_LEDS)
|
||||
+u8 at91_leds_cpu;
|
||||
+u8 at91_leds_timer;
|
||||
+
|
||||
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
|
||||
+{
|
||||
+ /* Enable GPIO to access the LEDs */
|
||||
+ at91_set_gpio_output(cpu_led, 1);
|
||||
+ at91_set_gpio_output(timer_led, 1);
|
||||
+
|
||||
+ at91_leds_cpu = cpu_led;
|
||||
+ at91_leds_timer = timer_led;
|
||||
+}
|
||||
+#else
|
||||
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
|
||||
+#endif
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* SSC -- Synchronous Serial Controller
|
||||
diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/Makefile linux-2.6.25.10/arch/arm/mach-at91/Makefile
|
||||
--- linux-2.6.25.10.old/arch/arm/mach-at91/Makefile 2008-07-06 09:01:54.000000000 +0200
|
||||
+++ linux-2.6.25.10/arch/arm/mach-at91/Makefile 2008-07-06 09:45:08.000000000 +0200
|
||||
@@ -60,7 +60,12 @@
|
||||
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
|
||||
|
||||
# Drivers
|
||||
-obj-y += leds.o
|
||||
+ifeq ($(CONFIG_MACH_VLINK),y)
|
||||
+led-$(CONFIG_MACH_VLINK) += vlink_leds.o
|
||||
+else
|
||||
+led-y += leds.o
|
||||
+endif
|
||||
+obj-y += $(led-y)
|
||||
obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
|
||||
|
||||
# Power Management
|
||||
diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/vlink_leds.c linux-2.6.25.10/arch/arm/mach-at91/vlink_leds.c
|
||||
--- linux-2.6.25.10.old/arch/arm/mach-at91/vlink_leds.c 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.25.10/arch/arm/mach-at91/vlink_leds.c 2008-07-06 09:40:37.000000000 +0200
|
||||
@@ -0,0 +1,105 @@
|
||||
+/*
|
||||
+ * LED driver for Atmel AT91-based boards.
|
||||
+ *
|
||||
+ * Copyright (C) SAN People (Pty) Ltd
|
||||
+ * Modified for FDL VersaLink Copyright (C) Guthrie Consulting
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or
|
||||
+ * modify it under the terms of the GNU General Public License
|
||||
+ * as published by the Free Software Foundation; either version
|
||||
+ * 2 of the License, or (at your option) any later version.
|
||||
+*/
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/init.h>
|
||||
+
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/leds.h>
|
||||
+#include <asm/arch/board.h>
|
||||
+#include <asm/arch/gpio.h>
|
||||
+
|
||||
+
|
||||
+static inline void at91_led_on(unsigned int led)
|
||||
+{
|
||||
+ at91_set_gpio_value(led, 0);
|
||||
+}
|
||||
+
|
||||
+static inline void at91_led_off(unsigned int led)
|
||||
+{
|
||||
+ at91_set_gpio_value(led, 1);
|
||||
+}
|
||||
+
|
||||
+static inline void at91_led_toggle(unsigned int led)
|
||||
+{
|
||||
+ unsigned long is_off = at91_get_gpio_value(led);
|
||||
+ if (is_off) {
|
||||
+ at91_led_on(led);
|
||||
+ at91_led_off(at91_leds_cpu);
|
||||
+ }
|
||||
+ else {
|
||||
+ at91_led_on(at91_leds_cpu);
|
||||
+ at91_led_off(led);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+
|
||||
+/*
|
||||
+ * Handle LED events.
|
||||
+ */
|
||||
+
|
||||
+/*
|
||||
+ * VersaLink has a single bi-coloured LED which changes colour when the
|
||||
+ * polarity is reversed
|
||||
+ */
|
||||
+static void at91_leds_event(led_event_t evt)
|
||||
+{
|
||||
+ unsigned long flags;
|
||||
+
|
||||
+ local_irq_save(flags);
|
||||
+
|
||||
+ switch(evt) {
|
||||
+ case led_start: /* System startup */
|
||||
+ at91_led_toggle(at91_leds_timer);
|
||||
+ break;
|
||||
+
|
||||
+ case led_stop: /* System stop / suspend */
|
||||
+ at91_led_toggle(at91_leds_timer);
|
||||
+ break;
|
||||
+
|
||||
+#ifdef CONFIG_LEDS_TIMER
|
||||
+ case led_timer: /* Every 50 timer ticks */
|
||||
+ at91_led_toggle(at91_leds_timer);
|
||||
+ break;
|
||||
+#endif
|
||||
+
|
||||
+#ifdef CONFIG_LEDS_CPU
|
||||
+ case led_idle_start: /* Entering idle state */
|
||||
+ at91_led_toggle(at91_leds_timer);
|
||||
+ break;
|
||||
+
|
||||
+ case led_idle_end: /* Exit idle state */
|
||||
+ at91_led_toggle(at91_leds_timer);
|
||||
+ break;
|
||||
+#endif
|
||||
+
|
||||
+ default:
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ local_irq_restore(flags);
|
||||
+}
|
||||
+
|
||||
+
|
||||
+static int __init leds_init(void)
|
||||
+{
|
||||
+ if (!at91_leds_timer || !at91_leds_cpu)
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ leds_event = at91_leds_event;
|
||||
+
|
||||
+ leds_event(led_start);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+__initcall(leds_init);
|
||||
diff -urN linux-2.6.25.10.old/include/asm-arm/arch-at91/board.h linux-2.6.25.10/include/asm-arm/arch-at91/board.h
|
||||
--- linux-2.6.25.10.old/include/asm-arm/arch-at91/board.h 2008-07-06 09:01:54.000000000 +0200
|
||||
+++ linux-2.6.25.10/include/asm-arm/arch-at91/board.h 2008-07-06 09:56:31.000000000 +0200
|
||||
@@ -162,6 +162,11 @@
|
||||
/* ISI */
|
||||
extern void __init at91_add_device_isi(void);
|
||||
|
||||
+ /* LEDs */
|
||||
+extern u8 at91_leds_cpu;
|
||||
+extern u8 at91_leds_timer;
|
||||
+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
|
||||
+
|
||||
/* Touchscreen Controller */
|
||||
extern void __init at91_add_device_tsadcc(void);
|
||||
|
||||
552
target/linux/at91/patches-2.6.25/003-gpio-driver.patch
Normal file
552
target/linux/at91/patches-2.6.25/003-gpio-driver.patch
Normal file
@ -0,0 +1,552 @@
|
||||
diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c
|
||||
--- linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c 2008-07-07 11:20:21.000000000 +0200
|
||||
+++ linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c 2008-07-07 12:11:40.000000000 +0200
|
||||
@@ -99,7 +99,7 @@
|
||||
*/
|
||||
|
||||
static struct at91_mmc_data __initdata vlink_mmc_data = {
|
||||
-// .det_pin = AT91_PIN_PB27,
|
||||
+// .det_pin = AT91_PIN_PC10,
|
||||
.slot_b = 0,
|
||||
.wire4 = 1,
|
||||
// .wp_pin = AT91_PIN_PA17,
|
||||
@@ -136,6 +136,7 @@
|
||||
|
||||
static void __init vlink_board_init(void)
|
||||
{
|
||||
+ int v100;
|
||||
/* Serial */
|
||||
at91_add_device_serial();
|
||||
/* Ethernet */
|
||||
@@ -157,36 +158,66 @@
|
||||
// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
|
||||
at91_add_device_mmc(0, &vlink_mmc_data);
|
||||
#endif
|
||||
+
|
||||
+// Set VLink version PIN as an input with pull-up (V1.5 = GND)
|
||||
+ at91_set_gpio_input(AT91_PIN_PC2, 1);
|
||||
+ v100 = at91_get_gpio_value(AT91_PIN_PC2);
|
||||
+
|
||||
/* LEDs */
|
||||
// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
|
||||
|
||||
/* Other LED's */
|
||||
- at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1
|
||||
- at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1
|
||||
- at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
|
||||
- at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
|
||||
- at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
|
||||
- at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
|
||||
+ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1
|
||||
+ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1
|
||||
+ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
|
||||
+ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
|
||||
+ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
|
||||
+ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
|
||||
+
|
||||
+/* Test jig presence detection */
|
||||
+ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
|
||||
|
||||
/* SIM Cards */
|
||||
- at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3
|
||||
- at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
|
||||
- at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
|
||||
+ if (at91_get_gpio_value(AT91_PIN_PB8)) {
|
||||
+ at91_set_gpio_output(AT91_PIN_PB11, 0);
|
||||
+ if (v100)
|
||||
+ at91_set_gpio_output(AT91_PIN_PB9, 1);
|
||||
+ else
|
||||
+ at91_set_gpio_output(AT91_PIN_PC13, 1);
|
||||
+ } else {
|
||||
+ at91_set_gpio_output(AT91_PIN_PB11, 1);
|
||||
+ if (v100)
|
||||
+ at91_set_gpio_output(AT91_PIN_PB9, 0);
|
||||
+ else
|
||||
+ at91_set_gpio_output(AT91_PIN_PC13, 0);
|
||||
+ }
|
||||
|
||||
-/* GSM Module Control */
|
||||
- at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
|
||||
+ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
|
||||
|
||||
-/* Test jig presence detection */
|
||||
- at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
|
||||
+/* GSM Module Control */
|
||||
+ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
|
||||
|
||||
/* Power indicator */
|
||||
- at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
|
||||
+ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
|
||||
|
||||
/* USB Device control */
|
||||
- at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
|
||||
- at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
|
||||
- at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
|
||||
-
|
||||
+ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
|
||||
+ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
|
||||
+ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
|
||||
+
|
||||
+/* USB Power controls */
|
||||
+
|
||||
+ if (v100)
|
||||
+ { // V100
|
||||
+ at91_set_gpio_input (AT91_PIN_PC12, 1); // SD Card present
|
||||
+ }
|
||||
+ else
|
||||
+ { // DO special things for V1.5
|
||||
+ at91_set_gpio_output(AT91_PIN_PB9 , 0); // USB suspend
|
||||
+ at91_set_gpio_input (AT91_PIN_PC10, 1); // SD Card present
|
||||
+ at91_set_gpio_output(AT91_PIN_PC11, 0); // USB Vin CTRL for modules onboard
|
||||
+ at91_set_gpio_output(AT91_PIN_PC12, 0); // SIM control
|
||||
+ }
|
||||
}
|
||||
|
||||
MACHINE_START(VLINK, "FDL VersaLink")
|
||||
diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c linux-2.6.25.10/arch/arm/mach-at91/gpio.c
|
||||
--- linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c 2008-07-07 11:20:21.000000000 +0200
|
||||
+++ linux-2.6.25.10/arch/arm/mach-at91/gpio.c 2008-07-07 11:42:33.000000000 +0200
|
||||
@@ -29,6 +29,7 @@
|
||||
|
||||
static struct at91_gpio_bank *gpio;
|
||||
static int gpio_banks;
|
||||
+static u32 pio_gpio_pin[4] = { 0, 0, 0, 0 };
|
||||
|
||||
|
||||
static inline void __iomem *pin_to_controller(unsigned pin)
|
||||
@@ -71,9 +72,13 @@
|
||||
{
|
||||
void __iomem *pio = pin_to_controller(pin);
|
||||
unsigned mask = pin_to_mask(pin);
|
||||
+ int bank = (pin - PIN_BASE) / 32;
|
||||
|
||||
if (!pio)
|
||||
return -EINVAL;
|
||||
+
|
||||
+ pio_gpio_pin[bank] |= mask;
|
||||
+
|
||||
__raw_writel(mask, pio + PIO_IDR);
|
||||
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
|
||||
__raw_writel(mask, pio + PIO_PER);
|
||||
@@ -130,10 +135,13 @@
|
||||
{
|
||||
void __iomem *pio = pin_to_controller(pin);
|
||||
unsigned mask = pin_to_mask(pin);
|
||||
+ int bank = (pin - PIN_BASE) / 32;
|
||||
|
||||
if (!pio)
|
||||
return -EINVAL;
|
||||
|
||||
+ pio_gpio_pin[bank] |= mask;
|
||||
+
|
||||
__raw_writel(mask, pio + PIO_IDR);
|
||||
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
|
||||
__raw_writel(mask, pio + PIO_ODR);
|
||||
@@ -151,10 +159,13 @@
|
||||
{
|
||||
void __iomem *pio = pin_to_controller(pin);
|
||||
unsigned mask = pin_to_mask(pin);
|
||||
+ int bank = (pin - PIN_BASE) / 32;
|
||||
|
||||
if (!pio)
|
||||
return -EINVAL;
|
||||
|
||||
+ pio_gpio_pin[bank] |= mask;
|
||||
+
|
||||
__raw_writel(mask, pio + PIO_IDR);
|
||||
__raw_writel(mask, pio + PIO_PUDR);
|
||||
__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
|
||||
@@ -262,6 +273,18 @@
|
||||
}
|
||||
EXPORT_SYMBOL(at91_get_gpio_value);
|
||||
|
||||
+int at91_is_pin_gpio(unsigned pin)
|
||||
+{
|
||||
+ void __iomem *pio = pin_to_controller(pin);
|
||||
+ unsigned mask = pin_to_mask(pin);
|
||||
+ int bank = (pin - PIN_BASE) / 32;
|
||||
+
|
||||
+ if (!pio)
|
||||
+ return -EINVAL;
|
||||
+ return (pio_gpio_pin[bank] & mask) != 0;
|
||||
+}
|
||||
+EXPORT_SYMBOL(at91_is_pin_gpio);
|
||||
+
|
||||
/*--------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
diff -urN linux-2.6.25.10.old/drivers/char/Kconfig linux-2.6.25.10/drivers/char/Kconfig
|
||||
--- linux-2.6.25.10.old/drivers/char/Kconfig 2008-07-07 11:20:21.000000000 +0200
|
||||
+++ linux-2.6.25.10/drivers/char/Kconfig 2008-07-07 11:42:33.000000000 +0200
|
||||
@@ -1072,5 +1072,12 @@
|
||||
The SPI driver gives user mode access to this serial
|
||||
bus on the AT91RM9200 processor.
|
||||
|
||||
+config AT91_VLIO
|
||||
+ tristate "Versalink LED and GPIO interface"
|
||||
+ depends on ARCH_AT91RM9200 && MACH_VLINK
|
||||
+ default n
|
||||
+ help
|
||||
+ Provides a handler GPIO's in userspace
|
||||
+
|
||||
endmenu
|
||||
|
||||
diff -urN linux-2.6.25.10.old/drivers/char/Makefile linux-2.6.25.10/drivers/char/Makefile
|
||||
--- linux-2.6.25.10.old/drivers/char/Makefile 2008-07-07 11:20:21.000000000 +0200
|
||||
+++ linux-2.6.25.10/drivers/char/Makefile 2008-07-07 11:42:33.000000000 +0200
|
||||
@@ -100,6 +100,7 @@
|
||||
obj-$(CONFIG_TELCLOCK) += tlclk.o
|
||||
obj-$(CONFIG_AT91_SPI) += at91_spi.o
|
||||
obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
|
||||
+obj-$(CONFIG_AT91_VLIO) += vlink_giu.o
|
||||
|
||||
obj-$(CONFIG_MWAVE) += mwave/
|
||||
obj-$(CONFIG_AGP) += agp/
|
||||
diff -urN linux-2.6.25.10.old/drivers/char/vlink_giu.c linux-2.6.25.10/drivers/char/vlink_giu.c
|
||||
--- linux-2.6.25.10.old/drivers/char/vlink_giu.c 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.25.10/drivers/char/vlink_giu.c 2008-07-07 13:41:51.000000000 +0200
|
||||
@@ -0,0 +1,333 @@
|
||||
+/*
|
||||
+ * Driver for FDL Versalink GPIO
|
||||
+ *
|
||||
+ * Copyright (C) 2005 Guthrie Consulting
|
||||
+ * Author: Hamish Guthrie <hamish@prodigi.ch>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License as published by
|
||||
+ * the Free Software Foundation; either version 2 of the License, or
|
||||
+ * (at your option) any later version.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ * You should have received a copy of the GNU General Public License
|
||||
+ * along with this program; if not, write to the Free Software
|
||||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
+ */
|
||||
+
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/moduleparam.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/fs.h>
|
||||
+#include <linux/errno.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/types.h>
|
||||
+#include <linux/proc_fs.h>
|
||||
+#include <linux/fcntl.h>
|
||||
+#include <linux/seq_file.h>
|
||||
+#include <linux/cdev.h>
|
||||
+#include <asm/arch/gpio.h>
|
||||
+#include <asm/uaccess.h>
|
||||
+
|
||||
+static int major; /* default is dynamic major device number */
|
||||
+module_param(major, int, 0);
|
||||
+MODULE_PARM_DESC(major, "Major device number");
|
||||
+
|
||||
+#define VIO_NR_DEVS 96
|
||||
+
|
||||
+struct vio_dev {
|
||||
+ struct cdev cdev;
|
||||
+};
|
||||
+
|
||||
+struct vio_dev *vio_devices;
|
||||
+static struct class *vio_class;
|
||||
+
|
||||
+#define MAX_VIO_NAMES 24
|
||||
+typedef struct
|
||||
+{
|
||||
+ char port;
|
||||
+ char pin;
|
||||
+ char name100[10];
|
||||
+ char name150[10];
|
||||
+} VIO_NAMES;
|
||||
+
|
||||
+VIO_NAMES VioName[MAX_VIO_NAMES] =
|
||||
+{ // Port, Pin, V100, V150
|
||||
+ {'A',19,"port1DTR" ,"port1DTR"},
|
||||
+ {'A',24,"port2DTR" ,"port2DTR"},
|
||||
+ {'B',8, "jigOn" ,"jigOn"} ,
|
||||
+ {'B',9, "enbSC3" ,"usbSUSPND"},
|
||||
+ {'B',10,"enbSC2" ,"enbSC2"},
|
||||
+ {'B',11,"enbSC1" ,"enbSC1"},
|
||||
+ {'B',12,"gsmONOFF" ,"gsmONOFF"},
|
||||
+ {'B',14,"ledBAP1" ,"ledBAP1"},
|
||||
+ {'B',15,"ledBBP1" ,"ledBBP1"},
|
||||
+ {'B',16,"ledBAP2" ,"ledBAP2"},
|
||||
+ {'B',17,"ledBBP2" ,"ledBBP2"},
|
||||
+ {'B',27,"udpCNX" ,"udpCNX"},
|
||||
+ {'B',28,"udpPUP" ,"udpPUP"},
|
||||
+ {'B',29,"port2DCD" ,"port2DCD"},
|
||||
+ {'C',2, "vlVer100" ,"vlVer150"},
|
||||
+ {'C',7, "ledFAP1" ,"ledFAP1"},
|
||||
+ {'C',8, "ledFBP1" ,"ledFBP1"},
|
||||
+ {'C',10,"vioC10" ,"sdCardON"},
|
||||
+ {'C',11,"vioC11" ,"vusbCTRL"},
|
||||
+ {'C',12,"sdCardON" ,"simCTRL"},
|
||||
+ {'C',13,"vioC13" ,"enbSC3"},
|
||||
+ {'C',14,"ledFBP2" ,"ledFBP2"},
|
||||
+ {'C',15,"ledFAP2" ,"ledFAP2"},
|
||||
+ {0,0,"",""}
|
||||
+};
|
||||
+
|
||||
+/*
|
||||
+{'B',18,"gsmRIO" ,"gsmRIO"},
|
||||
+{'B',20,"gsmTX" ,"gsmTX"},
|
||||
+{'B',21,"gsmRX" ,"gsmRX"},
|
||||
+{'B',22,"gsmPIND" ,"gsmPIND"},
|
||||
+{'B',23,"gsmDCD" ,"gsmDCD"},
|
||||
+{'B',24,"gsmCTS" ,"gsmCTS"},
|
||||
+{'B',25,"gsmDSR" ,"gsmDSR"},
|
||||
+{'B',26,"gsmRTS" ,"gsmRTS"},
|
||||
+*/
|
||||
+static void lookupPINName(char version100, char *devName, char port, char pin);
|
||||
+// EOF KWJ + AJE
|
||||
+
|
||||
+static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
|
||||
+ loff_t *ppos)
|
||||
+{
|
||||
+ unsigned int pin;
|
||||
+ int retval;
|
||||
+ char value = '0';
|
||||
+
|
||||
+ pin = iminor(file->f_dentry->d_inode);
|
||||
+
|
||||
+ retval = at91_get_gpio_value(PIN_BASE + pin);
|
||||
+ if (retval < 0)
|
||||
+ return -EFAULT;
|
||||
+
|
||||
+ value = retval + 0x30;
|
||||
+ if (put_user(value, buf))
|
||||
+ return -EFAULT;
|
||||
+
|
||||
+ return 1;
|
||||
+}
|
||||
+
|
||||
+static ssize_t gpio_write(struct file *file, const char __user *data,
|
||||
+ size_t len, loff_t *ppos)
|
||||
+{
|
||||
+ unsigned int pin;
|
||||
+ size_t i;
|
||||
+ char c;
|
||||
+ int retval = 0;
|
||||
+
|
||||
+ pin = iminor(file->f_dentry->d_inode);
|
||||
+
|
||||
+ for (i = 0; i < len; i++) {
|
||||
+ if (get_user(c, data + i))
|
||||
+ return -EFAULT;
|
||||
+
|
||||
+ switch (c) {
|
||||
+ case '0':
|
||||
+ case '1':
|
||||
+ retval = at91_set_gpio_value(PIN_BASE + pin, (int)c - 0x30);
|
||||
+ if (retval < 0)
|
||||
+ return -EFAULT;
|
||||
+ break;
|
||||
+ default:
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ if (retval < 0)
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ return i;
|
||||
+}
|
||||
+
|
||||
+static int gpio_open(struct inode *inode, struct file *file)
|
||||
+{
|
||||
+ return nonseekable_open(inode, file);
|
||||
+}
|
||||
+
|
||||
+static int gpio_release(struct inode *inode, struct file *file)
|
||||
+{
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct file_operations vio_fops = {
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .read = gpio_read,
|
||||
+ .write = gpio_write,
|
||||
+ .open = gpio_open,
|
||||
+ .release = gpio_release,
|
||||
+};
|
||||
+
|
||||
+static void vio_setup_cdev(struct vio_dev *dev, int index)
|
||||
+{
|
||||
+ int err, devno = MKDEV(major, index);
|
||||
+
|
||||
+ cdev_init(&dev->cdev, &vio_fops);
|
||||
+ dev->cdev.owner = THIS_MODULE;
|
||||
+ dev->cdev.ops = &vio_fops;
|
||||
+ err = cdev_add (&dev->cdev, devno, 1);
|
||||
+ if (err)
|
||||
+ printk(KERN_NOTICE "vio: Error %d adding vio%d", err, index);
|
||||
+}
|
||||
+
|
||||
+static int vio_remove(struct platform_device *dev)
|
||||
+{
|
||||
+ int i;
|
||||
+ dev_t devno = MKDEV(major, 0);
|
||||
+
|
||||
+ if (vio_devices) {
|
||||
+ for(i=0; i<VIO_NR_DEVS; i++) {
|
||||
+ int iodev = at91_is_pin_gpio(PIN_BASE + i);
|
||||
+ if (iodev) {
|
||||
+ cdev_del(&vio_devices[i].cdev);
|
||||
+ class_device_destroy(vio_class, MKDEV(major, i));
|
||||
+ }
|
||||
+ }
|
||||
+ kfree(vio_devices);
|
||||
+ }
|
||||
+
|
||||
+ class_destroy(vio_class);
|
||||
+ unregister_chrdev_region(devno, VIO_NR_DEVS);
|
||||
+
|
||||
+ platform_set_drvdata(dev, NULL);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int vio_probe(struct platform_device *dev)
|
||||
+{
|
||||
+ int retval, i, j;
|
||||
+ dev_t vdev = 0;
|
||||
+ char devName[30];
|
||||
+ int vlinkV100;
|
||||
+
|
||||
+ if (major) {
|
||||
+ vdev = MKDEV(major, 0);
|
||||
+ retval = register_chrdev_region(vdev, VIO_NR_DEVS, "vio");
|
||||
+ } else {
|
||||
+ retval = alloc_chrdev_region(&vdev, 0, VIO_NR_DEVS, "vio");
|
||||
+ major = MAJOR(vdev);
|
||||
+ }
|
||||
+ if (retval < 0) {
|
||||
+ printk(KERN_WARNING "vio: can't get major %d\n", major);
|
||||
+ return retval;
|
||||
+ }
|
||||
+
|
||||
+ if (major == 0) {
|
||||
+ major = retval;
|
||||
+ printk(KERN_INFO "vio: major number %d\n", major);
|
||||
+ }
|
||||
+
|
||||
+ vio_class = class_create(THIS_MODULE, "vio");
|
||||
+
|
||||
+ if (IS_ERR(vio_class)) {
|
||||
+ printk(KERN_ERR "vio: Error creating vio class\n");
|
||||
+ vio_remove(dev);
|
||||
+ return PTR_ERR(vio_class);
|
||||
+ }
|
||||
+
|
||||
+ vlinkV100 = at91_get_gpio_value(AT91_PIN_PC2); // Denotes V1.5 if GND
|
||||
+
|
||||
+ vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL);
|
||||
+ if (!vio_devices) {
|
||||
+ retval = -ENOMEM;
|
||||
+ goto fail;
|
||||
+ }
|
||||
+ memset(vio_devices, 0, VIO_NR_DEVS * sizeof(struct vio_dev));
|
||||
+
|
||||
+ for (i=0; i<VIO_NR_DEVS/32; i++)
|
||||
+ for(j=0; j<32; j++) {
|
||||
+ int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j);
|
||||
+ if (iodev) {
|
||||
+ vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j);
|
||||
+ // Lookup name of vio to create
|
||||
+ lookupPINName(vlinkV100, devName, i, j);
|
||||
+ class_device_create(vio_class, NULL, MKDEV(major, i*32 + j), NULL, devName);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ platform_set_drvdata(dev, vio_devices);
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+fail:
|
||||
+ vio_remove(dev);
|
||||
+ return retval;
|
||||
+}
|
||||
+
|
||||
+static void lookupPINName(char version100, char *devName, char port, char pin)
|
||||
+{
|
||||
+ int i = -1;
|
||||
+ char found = 0;
|
||||
+ while (!found)
|
||||
+ {
|
||||
+ i++;
|
||||
+ if (i >= MAX_VIO_NAMES)
|
||||
+ break;
|
||||
+ if (VioName[i].port == port+'A' && VioName[i].pin == pin)
|
||||
+ {
|
||||
+ printk(KERN_ERR "vio++: %c%d=%s\n",VioName[i].port,VioName[i].pin,VioName[i].name150);
|
||||
+ if (version100)
|
||||
+ strcpy(devName, VioName[i].name100);
|
||||
+ else
|
||||
+ strcpy(devName, VioName[i].name150);
|
||||
+ found = 1;
|
||||
+ }
|
||||
+ }
|
||||
+ if (!found)
|
||||
+ sprintf(devName, "vio%c%d", port + 'A', pin);
|
||||
+}
|
||||
+
|
||||
+static struct platform_device *vio_platform_device;
|
||||
+
|
||||
+static struct platform_driver vio_driver = {
|
||||
+ .probe = vio_probe,
|
||||
+ .remove = vio_remove,
|
||||
+ .driver = {
|
||||
+ .name = "vio",
|
||||
+ .owner = THIS_MODULE,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static int __init vio_init(void)
|
||||
+{
|
||||
+ int retval;
|
||||
+
|
||||
+ vio_platform_device = platform_device_register_simple("vio", -1, NULL, 0);
|
||||
+ if (IS_ERR(vio_platform_device)) {
|
||||
+ printk(KERN_WARNING "vio: device registration failed\n");
|
||||
+ return PTR_ERR(vio_platform_device);
|
||||
+ }
|
||||
+
|
||||
+ retval = platform_driver_register(&vio_driver);
|
||||
+ if (retval < 0) {
|
||||
+ printk(KERN_WARNING "vio: driver registration failed\n");
|
||||
+ platform_device_unregister(vio_platform_device);
|
||||
+ }
|
||||
+
|
||||
+ return retval;
|
||||
+}
|
||||
+
|
||||
+static void __exit vio_exit(void)
|
||||
+{
|
||||
+ platform_driver_unregister(&vio_driver);
|
||||
+ platform_device_unregister(vio_platform_device);
|
||||
+}
|
||||
+
|
||||
+module_init(vio_init);
|
||||
+module_exit(vio_exit);
|
||||
+
|
||||
+MODULE_AUTHOR("Hamish Guthrie <hamish@prodigi.ch>");
|
||||
+MODULE_DESCRIPTION("FDL Versalink GPIO Driver");
|
||||
+MODULE_LICENSE("GPL");
|
||||
--- linux-2.6.25.10.old/include/asm-arm/arch-at91/gpio.h 2008-07-03 05:46:47.000000000 +0200
|
||||
+++ linux-2.6.25.10/include/asm-arm/arch-at91/gpio.h 2008-07-07 17:03:03.000000000 +0200
|
||||
@@ -199,6 +199,7 @@
|
||||
/* callable at any time */
|
||||
extern int at91_set_gpio_value(unsigned pin, int value);
|
||||
extern int at91_get_gpio_value(unsigned pin);
|
||||
+extern int at91_is_pin_gpio(unsigned pin);
|
||||
|
||||
/* callable only from core power-management code */
|
||||
extern void at91_gpio_suspend(void);
|
||||
Loading…
Reference in New Issue
Block a user