ar71xx: add support for RB750UPr2

This patch adds support for the MikroTik RouterBOARD hEX PoE lite https://routerboard.com/RB750UPr2 Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Ethernet: 5x100M (1 PoE in, 1 PoE out) - USB: Type A This ethernet router is based on the same platform as the wireless router hAP. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2024-10-19 05:58:53 +02:00 · 2017-02-09 22:50:08 +01:00 · 2017-02-09 22:50:08 +01:00 · 19f42663d2
commit 19f42663d2
parent 8cbb2ac633
9 changed files with 68 additions and 19 deletions
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@ -222,6 +222,14 @@ rb-750)
 	ucidef_set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04"
 	ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
 	;;
+rb-750up-r2)
+	ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
+	ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
+	ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"
+	ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08"
+	ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04"
+	ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02"
+	;;
 rb-941-2nd)
 	ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
 	;;
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@ -136,6 +136,7 @@ ar71xx_setup_interfaces()
 	om2p-hsv4|\
 	pb42|\
 	pb44|\
+	rb-750up-r2|\
 	rb-951ui-2hnd|\
 	rb-951ui-2nd|\
 	routerstation|\
--- a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
@ -27,6 +27,7 @@ rb-912uag-2hpnd|\
 rb-912uag-5hpnd)
 	ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" "1"
 	;;
+rb-750up-r2|\
 rb-951ui-2nd)
 	ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1"
 	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@ -293,6 +293,7 @@ get_status_led() {
 	rb-750)
 		status_led="rb750:green:act"
 		;;
+	rb-750up-r2|\
 	rb-911g-2hpnd|\
 	rb-911g-5hpacd|\
 	rb-911g-5hpnd|\
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@ -838,6 +838,9 @@ ar71xx_board_detect() {
 	*"RouterBOARD 750GL")
 		name="rb-750gl"
 		;;
+	*"RouterBOARD 750UP r2")
+		name="rb-750up-r2"
+		;;
 	*"RouterBOARD 751")
 		name="rb-751"
 		;;
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@ -343,6 +343,7 @@ platform_check_image() {
 	ls-sr71|\
 	pb42|\
 	pb44|\
+	rb-750up-r2|\
 	rb-941-2nd|\
 	rb-951ui-2nd|\
 	rb-mapl-2nd|\
@ -617,6 +618,7 @@ platform_pre_upgrade() {
 	local board=$(ar71xx_board_name)

 	case "$board" in
+	rb-750up-r2|\
 	rb-941-2nd|\
 	rb-951ui-2nd|\
 	rb-mapl-2nd)
@ -655,6 +657,7 @@ platform_do_upgrade() {
 	local board=$(ar71xx_board_name)

 	case "$board" in
+	rb-750up-r2|\
 	rb-941-2nd|\
 	rb-951ui-2nd|\
 	rb-mapl-2nd)
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@ -929,6 +929,7 @@ config ATH79_MACH_RBSPI
 	  MikroTik RouterBOARD mAP lite
 	  MikroTik RouterBOARD hAP lite
 	  MikroTik RouterBOARD hAP
+	  MikroTik RouterBOARD hEX PoE lite

 config ATH79_MACH_RBSXTLITE
 	bool "MikroTik RouterBOARD SXT Lite"
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
@ -4,6 +4,7 @@
 *  - MikroTik RouterBOARD mAP L-2nD
 *  - MikroTik RouterBOARD 941L-2nD
 *  - MikroTik RouterBOARD 951Ui-2nD
+ *  - MikroTik RouterBOARD 750UP r2
 *
 *  Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org>
 *
@ -45,6 +46,7 @@
 #define RBSPI_HAS_WLAN		BIT(1)
 #define RBSPI_HAS_WAN4		BIT(2)	/* has WAN port on PHY4 */
 #define RBSPI_HAS_SSR		BIT(3)	/* has an SSR on SPI bus 0 */
+#define RBSPI_HAS_POE		BIT(4)

 #define RB_ROUTERBOOT_OFFSET    0x0000
 #define RB_BIOS_SIZE            0x1000
@ -418,6 +420,37 @@ static void __init rbhapl_setup(void)
 					rbspi_gpio_keys_reset16);
 }

+/*
+ * The hAP, hEX lite and hEX PoE lite share the same platform
+ */
+static void __init rbspi_952_750r2_setup(u32 flags)
+{
+	if (flags & RBSPI_HAS_SSR)
+		rbspi_spi_cs_gpios[1] = RB952_GPIO_SSR_CS;
+
+	rbspi_peripherals_setup(flags);
+
+	/* GMAC1 is HW MAC + 1, WLAN MAC IS HW MAC + 5 */
+	rbspi_network_setup(flags, 1, 5);
+
+	if (flags & RBSPI_HAS_USB)
+		gpio_request_one(RB952_GPIO_USB_POWER,
+				GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+				"USB power");
+
+	if (flags & RBSPI_HAS_POE)
+		gpio_request_one(RB952_GPIO_POE_POWER,
+				GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+				"POE power");
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb952_leds), rb952_leds);
+
+	/* These devices have a single reset button as gpio 16 */
+	ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(rbspi_gpio_keys_reset16),
+					rbspi_gpio_keys_reset16);
+}
+
 /*
 * Init the hAP hardware.
 * The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned
@ -430,34 +463,31 @@ static void __init rbhapl_setup(void)
 static void __init rb952_setup(void)
 {
 	u32 flags = RBSPI_HAS_WLAN | RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
-			RBSPI_HAS_SSR;
+			RBSPI_HAS_SSR | RBSPI_HAS_POE;

 	if (rbspi_platform_setup())
 		return;

-	rbspi_spi_cs_gpios[1] = RB952_GPIO_SSR_CS;
+	rbspi_952_750r2_setup(flags);
+}

-	rbspi_peripherals_setup(flags);
+/*
+ * Init the hEX PoE lite hardware.
+ * The 750UP r2 (hEX PoE lite) is nearly identical to the hAP, only without
+ * WLAN.
+ */
+static void __init rb750upr2_setup(void)
+{
+	u32 flags = RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
+			RBSPI_HAS_SSR | RBSPI_HAS_POE;

-	/* GMAC1 is HW MAC + 1, WLAN MAC IS HW MAC + 5 */
-	rbspi_network_setup(flags, 1, 5);
+	if (rbspi_platform_setup())
+		return;

-	gpio_request_one(RB952_GPIO_USB_POWER,
-			GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
-			"USB power");
-
-	gpio_request_one(RB952_GPIO_POE_POWER,
-			GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
-			"POE power");
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb952_leds), rb952_leds);
-
-	/* hAP has a single reset button as gpio 16 */
-	ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(rbspi_gpio_keys_reset16),
-					rbspi_gpio_keys_reset16);
+	rbspi_952_750r2_setup(flags);
 }

 MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
 MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup);
 MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup);
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@ -167,6 +167,7 @@ enum ath79_mach_type {
 	ATH79_MACH_RB_711GR100,			/* Mikrotik RouterBOARD 911/912 boards */
 	ATH79_MACH_RB_750,			/* MikroTik RouterBOARD 750 */
 	ATH79_MACH_RB_750G_R3,			/* MikroTik RouterBOARD 750GL */
+	ATH79_MACH_RB_750UPR2,			/* MikroTik RouterBOARD 750UP r2 */
 	ATH79_MACH_RB_751,			/* MikroTik RouterBOARD 751 */
 	ATH79_MACH_RB_751G,			/* Mikrotik RouterBOARD 751G */
 	ATH79_MACH_RB_922GS,			/* Mikrotik RouterBOARD 911/922GS boards */