1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-18 13:29:16 +02:00

imx: kernel: add imx8mp PCI support

IMX8MP PCI support requires a few patches backported from Linux 6.2.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
This commit is contained in:
Tim Harvey 2024-01-22 15:30:18 -08:00 committed by Robert Marko
parent bd512e368f
commit 041fd1c835
3 changed files with 345 additions and 0 deletions

@ -0,0 +1,49 @@
From ffcbb4ccd357eeb649036e379a34bf5fb8d4f47c Mon Sep 17 00:00:00 2001
From: Richard Zhu <hongxing.zhu@nxp.com>
Date: Thu, 13 Oct 2022 09:47:00 +0800
Subject: [PATCH 1/3] phy: freescale: imx8m-pcie: Refine register definitions
No function changes, refine PHY register definitions.
- Keep align with other CMN PHY registers, refine the definitions of
PHY_CMN_REG75.
- Remove two BIT definitions that are not used at all.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -31,12 +31,10 @@
#define IMX8MM_PCIE_PHY_CMN_REG065 0x194
#define ANA_AUX_RX_TERM (BIT(7) | BIT(4))
#define ANA_AUX_TX_LVL GENMASK(3, 0)
-#define IMX8MM_PCIE_PHY_CMN_REG75 0x1D4
-#define PCIE_PHY_CMN_REG75_PLL_DONE 0x3
+#define IMX8MM_PCIE_PHY_CMN_REG075 0x1D4
+#define ANA_PLL_DONE 0x3
#define PCIE_PHY_TRSV_REG5 0x414
-#define PCIE_PHY_TRSV_REG5_GEN1_DEEMP 0x2D
#define PCIE_PHY_TRSV_REG6 0x418
-#define PCIE_PHY_TRSV_REG6_GEN2_DEEMP 0xF
#define IMX8MM_GPR_PCIE_REF_CLK_SEL GENMASK(25, 24)
#define IMX8MM_GPR_PCIE_REF_CLK_PLL FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
@@ -131,9 +129,8 @@ static int imx8_pcie_phy_power_on(struct
reset_control_deassert(imx8_phy->reset);
/* Polling to check the phy is ready or not. */
- ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75,
- val, val == PCIE_PHY_CMN_REG75_PLL_DONE,
- 10, 20000);
+ ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
+ val, val == ANA_PLL_DONE, 10, 20000);
return ret;
}

@ -0,0 +1,197 @@
From fb681544808b85c0cdf41a627401e5d470633914 Mon Sep 17 00:00:00 2001
From: Richard Zhu <hongxing.zhu@nxp.com>
Date: Thu, 13 Oct 2022 09:47:01 +0800
Subject: [PATCH 2/3] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY
driver
To make it more flexible and easy to expand. Refine i.MX8MM PCIe PHY
driver.
- Use gpr compatible string to avoid the codes duplications when add
another platform PCIe PHY support.
- Re-arrange the codes to let it more flexible and easy to expand.
No functional change. Re-arrange the TX tuning, since internal registers
can be wrote through APB interface before assertion of CMN_RST.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 106 +++++++++++++--------
1 file changed, 66 insertions(+), 40 deletions(-)
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -11,6 +11,7 @@
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -45,6 +46,15 @@
#define IMX8MM_GPR_PCIE_SSC_EN BIT(16)
#define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE BIT(9)
+enum imx8_pcie_phy_type {
+ IMX8MM,
+};
+
+struct imx8_pcie_phy_drvdata {
+ const char *gpr;
+ enum imx8_pcie_phy_type variant;
+};
+
struct imx8_pcie_phy {
void __iomem *base;
struct clk *clk;
@@ -55,6 +65,7 @@ struct imx8_pcie_phy {
u32 tx_deemph_gen1;
u32 tx_deemph_gen2;
bool clkreq_unused;
+ const struct imx8_pcie_phy_drvdata *drvdata;
};
static int imx8_pcie_phy_power_on(struct phy *phy)
@@ -66,31 +77,17 @@ static int imx8_pcie_phy_power_on(struct
reset_control_assert(imx8_phy->reset);
pad_mode = imx8_phy->refclk_pad_mode;
- /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
- imx8_phy->clkreq_unused ?
- 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_AUX_EN,
- IMX8MM_GPR_PCIE_AUX_EN);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_POWER_OFF, 0);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_SSC_EN, 0);
-
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_REF_CLK_SEL,
- pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
- IMX8MM_GPR_PCIE_REF_CLK_EXT :
- IMX8MM_GPR_PCIE_REF_CLK_PLL);
- usleep_range(100, 200);
-
- /* Do the PHY common block reset */
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_CMN_RST,
- IMX8MM_GPR_PCIE_CMN_RST);
- usleep_range(200, 500);
+ switch (imx8_phy->drvdata->variant) {
+ case IMX8MM:
+ /* Tune PHY de-emphasis setting to pass PCIe compliance. */
+ if (imx8_phy->tx_deemph_gen1)
+ writel(imx8_phy->tx_deemph_gen1,
+ imx8_phy->base + PCIE_PHY_TRSV_REG5);
+ if (imx8_phy->tx_deemph_gen2)
+ writel(imx8_phy->tx_deemph_gen2,
+ imx8_phy->base + PCIE_PHY_TRSV_REG6);
+ break;
+ }
if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
@@ -118,15 +115,37 @@ static int imx8_pcie_phy_power_on(struct
imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
}
- /* Tune PHY de-emphasis setting to pass PCIe compliance. */
- if (imx8_phy->tx_deemph_gen1)
- writel(imx8_phy->tx_deemph_gen1,
- imx8_phy->base + PCIE_PHY_TRSV_REG5);
- if (imx8_phy->tx_deemph_gen2)
- writel(imx8_phy->tx_deemph_gen2,
- imx8_phy->base + PCIE_PHY_TRSV_REG6);
+ /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+ imx8_phy->clkreq_unused ?
+ 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_AUX_EN,
+ IMX8MM_GPR_PCIE_AUX_EN);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_POWER_OFF, 0);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_SSC_EN, 0);
- reset_control_deassert(imx8_phy->reset);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_REF_CLK_SEL,
+ pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+ IMX8MM_GPR_PCIE_REF_CLK_EXT :
+ IMX8MM_GPR_PCIE_REF_CLK_PLL);
+ usleep_range(100, 200);
+
+ /* Do the PHY common block reset */
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_CMN_RST,
+ IMX8MM_GPR_PCIE_CMN_RST);
+
+ switch (imx8_phy->drvdata->variant) {
+ case IMX8MM:
+ reset_control_deassert(imx8_phy->reset);
+ usleep_range(200, 500);
+ break;
+ }
/* Polling to check the phy is ready or not. */
ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
@@ -157,6 +176,17 @@ static const struct phy_ops imx8_pcie_ph
.owner = THIS_MODULE,
};
+static const struct imx8_pcie_phy_drvdata imx8mm_drvdata = {
+ .gpr = "fsl,imx8mm-iomuxc-gpr",
+ .variant = IMX8MM,
+};
+
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+ {.compatible = "fsl,imx8mm-pcie-phy", .data = &imx8mm_drvdata, },
+ { },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
static int imx8_pcie_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
@@ -169,6 +199,8 @@ static int imx8_pcie_phy_probe(struct pl
if (!imx8_phy)
return -ENOMEM;
+ imx8_phy->drvdata = of_device_get_match_data(dev);
+
/* get PHY refclk pad mode */
of_property_read_u32(np, "fsl,refclk-pad-mode",
&imx8_phy->refclk_pad_mode);
@@ -194,7 +226,7 @@ static int imx8_pcie_phy_probe(struct pl
/* Grab GPR config register range */
imx8_phy->iomuxc_gpr =
- syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+ syscon_regmap_lookup_by_compatible(imx8_phy->drvdata->gpr);
if (IS_ERR(imx8_phy->iomuxc_gpr)) {
dev_err(dev, "unable to find iomuxc registers\n");
return PTR_ERR(imx8_phy->iomuxc_gpr);
@@ -222,12 +254,6 @@ static int imx8_pcie_phy_probe(struct pl
return PTR_ERR_OR_ZERO(phy_provider);
}
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
- {.compatible = "fsl,imx8mm-pcie-phy",},
- { },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
static struct platform_driver imx8_pcie_phy_driver = {
.probe = imx8_pcie_phy_probe,
.driver = {

@ -0,0 +1,99 @@
From bf03b9281b119bcdc167b2dd6ac98294587eb5ff Mon Sep 17 00:00:00 2001
From: Richard Zhu <hongxing.zhu@nxp.com>
Date: Thu, 13 Oct 2022 09:47:02 +0800
Subject: [PATCH 3/3] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support
Add i.MX8MP PCIe PHY support.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 25 ++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -48,6 +48,7 @@
enum imx8_pcie_phy_type {
IMX8MM,
+ IMX8MP,
};
struct imx8_pcie_phy_drvdata {
@@ -60,6 +61,7 @@ struct imx8_pcie_phy {
struct clk *clk;
struct phy *phy;
struct regmap *iomuxc_gpr;
+ struct reset_control *perst;
struct reset_control *reset;
u32 refclk_pad_mode;
u32 tx_deemph_gen1;
@@ -74,11 +76,11 @@ static int imx8_pcie_phy_power_on(struct
u32 val, pad_mode;
struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
- reset_control_assert(imx8_phy->reset);
-
pad_mode = imx8_phy->refclk_pad_mode;
switch (imx8_phy->drvdata->variant) {
case IMX8MM:
+ reset_control_assert(imx8_phy->reset);
+
/* Tune PHY de-emphasis setting to pass PCIe compliance. */
if (imx8_phy->tx_deemph_gen1)
writel(imx8_phy->tx_deemph_gen1,
@@ -87,6 +89,8 @@ static int imx8_pcie_phy_power_on(struct
writel(imx8_phy->tx_deemph_gen2,
imx8_phy->base + PCIE_PHY_TRSV_REG6);
break;
+ case IMX8MP: /* Do nothing. */
+ break;
}
if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
@@ -141,6 +145,9 @@ static int imx8_pcie_phy_power_on(struct
IMX8MM_GPR_PCIE_CMN_RST);
switch (imx8_phy->drvdata->variant) {
+ case IMX8MP:
+ reset_control_deassert(imx8_phy->perst);
+ fallthrough;
case IMX8MM:
reset_control_deassert(imx8_phy->reset);
usleep_range(200, 500);
@@ -181,8 +188,14 @@ static const struct imx8_pcie_phy_drvdat
.variant = IMX8MM,
};
+static const struct imx8_pcie_phy_drvdata imx8mp_drvdata = {
+ .gpr = "fsl,imx8mp-iomuxc-gpr",
+ .variant = IMX8MP,
+};
+
static const struct of_device_id imx8_pcie_phy_of_match[] = {
{.compatible = "fsl,imx8mm-pcie-phy", .data = &imx8mm_drvdata, },
+ {.compatible = "fsl,imx8mp-pcie-phy", .data = &imx8mp_drvdata, },
{ },
};
MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
@@ -238,6 +251,14 @@ static int imx8_pcie_phy_probe(struct pl
return PTR_ERR(imx8_phy->reset);
}
+ if (imx8_phy->drvdata->variant == IMX8MP) {
+ imx8_phy->perst =
+ devm_reset_control_get_exclusive(dev, "perst");
+ if (IS_ERR(imx8_phy->perst))
+ dev_err_probe(dev, PTR_ERR(imx8_phy->perst),
+ "Failed to get PCIE PHY PERST control\n");
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
imx8_phy->base = devm_ioremap_resource(dev, res);
if (IS_ERR(imx8_phy->base))