mirror/github.com-nboughton-dotfiles
1
1
Fork 0
mirror of https://github.com/nboughton/dotfiles synced 2024-11-22 05:41:57 +01:00
Code Issues Releases Activity

New laptop who dis

Browse Source
This commit is contained in:
Nick Boughton 2021-07-09 09:56:09 +01:00
parent c37985e73c
commit c95e2974f5
31 changed files with 481 additions and 4397 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

78
.gitignore vendored
View File

@ -1,71 +1,45 @@
BraveSoftware/
Code\ -\ OSS/
GIMP/
Insync/
Mousepad/
Slack/
Unknown\ Organization/
autostart/
catfish/
cawbird/
bpytop/
cef_user_data/
configstore/
Code Industry/
code-oss/
Code - OSS/
dconf/
discord/
enchant/
Electron/
evolution/
filezilla/
fontconfig/
font-manager/
galculator/
geary/
gedit/
GIMP/
goa-1.0/
gtk-2.0/
gtk-3.0/bookmarks
gtk-4.0/
htop/
libfm/
lxsession
lxsession-default-apps/
ibus/
Insync/
libreoffice/
matplotlib/
mimeapps.list
mpv/
obs-studio/
pavucontrol.ini
pcmanfm/
pipewire/
procps/
pulse/
ristretto/
scummvm/
spicetify/
spotify-tui/
spotify/
spotifyd/
QtProject.conf
Slack/
systemd/
Thunar/
torbrowser/
transmission/
unity3d/
user-dirs.dirs
user-dirs.locale
vivaldi/
xfce4/
yay/
zoomus.conf
org.gabmus.giara.json
font-manager/
BetterDiscord/
Code\ Industry/
inkscape/
libreoffice/
evince/
Thunar/
transmission/
pipewire-media-session/
systemd/
gedit/
tilix/
QtProject.conf
pipewire/
oomox/
shalarm/
vivaldi/
qt5ct/
rofi.old/
torbrowser/
vlc/
qt6ct/
sqlitebrowser/
castero/
yapa/
bpytop/
galculator/
obs-studio/
yapa

161
cava/config.bak
View File

@ -1,161 +0,0 @@
## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
[general]
# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
; mode = normal
# Accepts only non-negative values.
; framerate = 60
# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
# new as of 0.6.0 autosens of low values (dynamic range)
# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
; autosens = 1
; overshoot = 20
# Manual sensitivity in %. Autosens must be turned off for this to take effect.
# 200 means double height. Accepts only non-negative values.
; sensitivity = 100
# The number of bars (0-200). 0 sets it to auto (fill up console).
# Bars' width and space between bars in number of characters.
; bars = 0
; bar_width = 2
; bar_spacing = 1
# Lower and higher cutoff frequencies for lowest and highest bars
# the bandwidth of the visualizer.
# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
# Cava will automatically increase the higher cutoff if a too low band is specified.
; lower_cutoff_freq = 50
; higher_cutoff_freq = 10000
# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
; sleep_timer = 0
[input]
# Audio capturing method. Possible methods are: 'pulse', 'alsa', 'fifo', 'sndio' or 'shmem'
# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
#
# All input methods uses the same config variable 'source'
# to define where it should get the audio.
#
# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
#
# For alsa 'source' will be the capture device.
# For fifo 'source' will be the path to fifo-file.
# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
; method = pulse
; source = auto
; method = alsa
; source = hw:Loopback,1
; method = fifo
; source = /tmp/mpd.fifo
; sample_rate = 44100
; sample_bits = 16
; method = shmem
; source = /squeezelite-AA:BB:CC:DD:EE:FF
; method = portaudio
; source = auto
[output]
# Output method. Can be 'ncurses', 'noncurses' or 'raw'.
# 'noncurses' uses a custom framebuffer technique and draws only changes
# from frame to frame. 'ncurses' is default if supported
#
# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
# stream of the bar heights that can be used to send to other applications.
# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
; method = ncurses
# Visual channels. Can be 'stereo' or 'mono'.
# 'stereo' mirrors both channels with low frequencies in center.
# 'mono' outputs left to right lowest to highest frequencies.
# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
; channels = stereo
; mono_option = average
# Raw output target. A fifo will be created if target does not exist.
; raw_target = /dev/stdout
# Raw data format. Can be 'binary' or 'ascii'.
; data_format = binary
# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
; bit_format = 16bit
# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
; ascii_max_range = 1000
# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
; bar_delimiter = 59
; frame_delimiter = 10
[color]
# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
# ncurses output method and a terminal that can change color definitions such as Gnome-terminal or rxvt.
# if supported, ncurses mode will be forced on if user defined colors are used.
# default is to keep current terminal color
; background = default
; foreground = default
# Gradient mode, only hex defined colors (and thereby ncurses mode) are supported,
# background must also be defined in hex or remain commented out. 1 = on, 0 = off.
# You can define as many as 8 different colors. They range from bottom to top of screen
gradient = 1
gradient_count = 4
gradient_color_1 = '#5e81ac'
gradient_color_2 = '#81a1c1'
gradient_color_3 = '#88c0d0'
gradient_color_4 = '#8fbcbb'
[smoothing]
# Percentage value for integral smoothing. Takes values from 0 - 100.
# Higher values means smoother, but less precise. 0 to disable.
; integral = 77
# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
; monstercat = 0
; waves = 0
# Set gravity percentage for "drop off". Higher values means bars will drop faster.
# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
; gravity = 100
# In bar height, bars that would have been lower that this will not be drawn.
; ignore = 0
[eq]
# This one is tricky. You can have as much keys as you want.
# Remember to uncomment more then one key! More keys = more precision.
# Look at readme.md on github for further explanations and examples.
; 1 = 1 # bass
; 2 = 1
; 3 = 1 # midtone
; 4 = 1
; 5 = 1 # treble

431
dunst/dunstrc.bak
View File

@ -1,431 +0,0 @@
[global]
### Display ###
# Which monitor should the notifications be displayed on.
monitor = 0
# Display notification on focused monitor. Possible modes are:
# mouse: follow mouse pointer
# keyboard: follow window with keyboard focus
# none: don't follow anything
#
# "keyboard" needs a window manager that exports the
# _NET_ACTIVE_WINDOW property.
# This should be the case for almost all modern window managers.
#
# If this option is set to mouse or keyboard, the monitor option
# will be ignored.
follow = mouse
# The geometry of the window:
# [{width}]x{height}[+/-{x}+/-{y}]
# The geometry of the message window.
# The height is measured in number of notifications everything else
# in pixels. If the width is omitted but the height is given
# ("-geometry x2"), the message window expands over the whole screen
# (dmenu-like). If width is 0, the window expands to the longest
# message displayed. A positive x is measured from the left, a
# negative from the right side of the screen. Y is measured from
# the top and down respectively.
# The width can be negative. In this case the actual width is the
# screen width minus the width defined in within the geometry option.
geometry = "300x5-50+20"
# Show how many messages are currently hidden (because of geometry).
indicate_hidden = yes
# Shrink window if it's smaller than the width. Will be ignored if
# width is 0.
shrink = no
# The transparency of the window. Range: [0; 100].
# This option will only work if a compositing window manager is
# present (e.g. xcompmgr, compiz, etc.).
transparency = 10
# The height of the entire notification. If the height is smaller
# than the font height and padding combined, it will be raised
# to the font height and padding.
notification_height = 0
# Draw a line of "separator_height" pixel height between two
# notifications.
# Set to 0 to disable.
separator_height = 2
# Padding between text and separator.
padding = 8
# Horizontal padding.
horizontal_padding = 8
# Defines width in pixels of frame around the notification window.
# Set to 0 to disable.
frame_width = 2
# Defines color of the frame around the notification window.
frame_color = "#5e81ac"
# Define a color for the separator.
# possible values are:
# * auto: dunst tries to find a color fitting to the background;
# * foreground: use the same color as the foreground;
# * frame: use the same color as the frame;
# * anything else will be interpreted as a X color.
separator_color = frame
# Sort messages by urgency.
sort = yes
# Don't remove messages, if the user is idle (no mouse or keyboard input)
# for longer than idle_threshold seconds.
# Set to 0 to disable.
# A client can set the 'transient' hint to bypass this. See the rules
# section for how to disable this if necessary
idle_threshold = 120
### Text ###
font = Roboto 9
# The spacing between lines. If the height is smaller than the
# font height, it will get raised to the font height.
line_height = 0
# Possible values are:
# full: Allow a small subset of html markup in notifications:
# <b>bold</b>
# <i>italic</i>
# <s>strikethrough</s>
# <u>underline</u>
#
# For a complete reference see
# <https://developer.gnome.org/pango/stable/pango-Markup.html>.
#
# strip: This setting is provided for compatibility with some broken
# clients that send markup even though it's not enabled on the
# server. Dunst will try to strip the markup but the parsing is
# simplistic so using this option outside of matching rules for
# specific applications *IS GREATLY DISCOURAGED*.
#
# no: Disable markup parsing, incoming notifications will be treated as
# plain text. Dunst will not advertise that it has the body-markup
# capability if this is set as a global setting.
#
# It's important to note that markup inside the format option will be parsed
# regardless of what this is set to.
markup = full
# The format of the message. Possible variables are:
# %a appname
# %s summary
# %b body
# %i iconname (including its path)
# %I iconname (without its path)
# %p progress value if set ([ 0%] to [100%]) or nothing
# %n progress value if set without any extra characters
# %% Literal %
# Markup is allowed
format = "<b>%s</b>\n%b"
# Alignment of message text.
# Possible values are "left", "center" and "right".
alignment = right
# Vertical alignment of message text and icon.
# Possible values are "top", "center" and "bottom".
vertical_alignment = top
# Show age of message if message is older than show_age_threshold
# seconds.
# Set to -1 to disable.
show_age_threshold = 60
# Split notifications into multiple lines if they don't fit into
# geometry.
word_wrap = yes
# When word_wrap is set to no, specify where to make an ellipsis in long lines.
# Possible values are "start", "middle" and "end".
ellipsize = middle
# Ignore newlines '\n' in notifications.
ignore_newline = no
# Stack together notifications with the same content
stack_duplicates = true
# Hide the count of stacked notifications with the same content
hide_duplicate_count = false
# Display indicators for URLs (U) and actions (A).
show_indicators = yes
### Icons ###
# Align icons left/right/off
icon_position = left
# Scale small icons up to this size, set to 0 to disable. Helpful
# for e.g. small files or high-dpi screens. In case of conflict,
# max_icon_size takes precedence over this.
min_icon_size = 0
# Scale larger icons down to this size, set to 0 to disable
max_icon_size = 32
# Paths to default icons.
icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
### History ###
# Should a notification popped up from history be sticky or timeout
# as if it would normally do.
sticky_history = yes
# Maximum amount of notifications kept in history
history_length = 20
### Misc/Advanced ###
# dmenu path.
dmenu = /usr/bin/dmenu -p dunst:
# Browser for opening urls in context menu.
browser = /usr/bin/firefox -new-tab
# Always run rule-defined scripts, even if the notification is suppressed
always_run_script = true
# Define the title of the windows spawned by dunst
title = Dunst
# Define the class of the windows spawned by dunst
class = Dunst
# Print a notification on startup.
# This is mainly for error detection, since dbus (re-)starts dunst
# automatically after a crash.
startup_notification = false
# Manage dunst's desire for talking
# Can be one of the following values:
# crit: Critical features. Dunst aborts
# warn: Only non-fatal warnings
# mesg: Important Messages
# info: all unimportant stuff
# debug: all less than unimportant stuff
verbosity = mesg
# Define the corner radius of the notification window
# in pixel size. If the radius is 0, you have no rounded
# corners.
# The radius will be automatically lowered if it exceeds half of the
# notification height to avoid clipping text and/or icons.
corner_radius = 10
# Ignore the dbus closeNotification message.
# Useful to enforce the timeout set by dunst configuration. Without this
# parameter, an application may close the notification sent before the
# user defined timeout.
ignore_dbusclose = false
### Legacy
# Use the Xinerama extension instead of RandR for multi-monitor support.
# This setting is provided for compatibility with older nVidia drivers that
# do not support RandR and using it on systems that support RandR is highly
# discouraged.
#
# By enabling this setting dunst will not be able to detect when a monitor
# is connected or disconnected which might break follow mode if the screen
# layout changes.
force_xinerama = false
### mouse
# Defines list of actions for each mouse event
# Possible values are:
# * none: Don't do anything.
# * do_action: If the notification has exactly one action, or one is marked as default,
# invoke it. If there are multiple and no default, open the context menu.
# * close_current: Close current notification.
# * close_all: Close all notifications.
# These values can be strung together for each mouse event, and
# will be executed in sequence.
mouse_left_click = close_current
mouse_middle_click = do_action, close_current
mouse_right_click = close_all
# Experimental features that may or may not work correctly. Do not expect them
# to have a consistent behaviour across releases.
[experimental]
# Calculate the dpi to use on a per-monitor basis.
# If this setting is enabled the Xft.dpi value will be ignored and instead
# dunst will attempt to calculate an appropriate dpi value for each monitor
# using the resolution and physical size. This might be useful in setups
# where there are multiple screens with very different dpi values.
per_monitor_dpi = false
[shortcuts]
# Shortcuts are specified as [modifier+][modifier+]...key
# Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
# "mod3" and "mod4" (windows-key).
# Xev might be helpful to find names for keys.
# Close notification.
close = ctrl+space
# Close all notifications.
close_all = ctrl+shift+space
# Redisplay last message(s).
# On the US keyboard layout "grave" is normally above TAB and left
# of "1". Make sure this key actually exists on your keyboard layout,
# e.g. check output of 'xmodmap -pke'
history = ctrl+grave
# Context menu.
context = ctrl+shift+period
[urgency_low]
# IMPORTANT: colors have to be defined in quotation marks.
# Otherwise the "#" and following would be interpreted as a comment.
background = "#5e81ac"
foreground = "#d8dee9"
timeout = 10
# Icon for notifications with low urgency, uncomment to enable
#icon = /path/to/icon
[urgency_normal]
background = "#2e3440"
foreground = "#d8dee9"
timeout = 10
# Icon for notifications with normal urgency, uncomment to enable
#icon = /path/to/icon
[urgency_critical]
background = "#bf616a"
foreground = "#4c566a"
frame_color = "#2e3440"
timeout = 0
# Icon for notifications with critical urgency, uncomment to enable
#icon = /path/to/icon
# Every section that isn't one of the above is interpreted as a rules to
# override settings for certain messages.
#
# Messages can be matched by
# appname (discouraged, see desktop_entry)
# body
# category
# desktop_entry
# icon
# match_transient
# msg_urgency
# stack_tag
# summary
#
# and you can override the
# background
# foreground
# format
# frame_color
# fullscreen
# new_icon
# set_stack_tag
# set_transient
# timeout
# urgency
#
# Shell-like globbing will get expanded.
#
# Instead of the appname filter, it's recommended to use the desktop_entry filter.
# GLib based applications export their desktop-entry name. In comparison to the appname,
# the desktop-entry won't get localized.
#
# SCRIPTING
# You can specify a script that gets run when the rule matches by
# setting the "script" option.
# The script will be called as follows:
# script appname summary body icon urgency
# where urgency can be "LOW", "NORMAL" or "CRITICAL".
#
# NOTE: if you don't want a notification to be displayed, set the format
# to "".
# NOTE: It might be helpful to run dunst -print in a terminal in order
# to find fitting options for rules.
# Disable the transient hint so that idle_threshold cannot be bypassed from the
# client
#[transient_disable]
# match_transient = yes
# set_transient = no
#
# Make the handling of transient notifications more strict by making them not
# be placed in history.
#[transient_history_ignore]
# match_transient = yes
# history_ignore = yes
# fullscreen values
# show: show the notifications, regardless if there is a fullscreen window opened
# delay: displays the new notification, if there is no fullscreen window active
# If the notification is already drawn, it won't get undrawn.
# pushback: same as delay, but when switching into fullscreen, the notification will get
# withdrawn from screen again and will get delayed like a new notification
#[fullscreen_delay_everything]
# fullscreen = delay
#[fullscreen_show_critical]
# msg_urgency = critical
# fullscreen = show
#[espeak]
# summary = "*"
# script = dunst_espeak.sh
#[script-test]
# summary = "*script*"
# script = dunst_test.sh
#[ignore]
# # This notification will not be displayed
# summary = "foobar"
# format = ""
#[history-ignore]
# # This notification will not be saved in history
# summary = "foobar"
# history_ignore = yes
#[skip-display]
# # This notification will not be displayed, but will be included in the history
# summary = "foobar"
# skip_display = yes
#[signed_on]
# appname = Pidgin
# summary = "*signed on*"
# urgency = low
#
#[signed_off]
# appname = Pidgin
# summary = *signed off*
# urgency = low
#
#[says]
# appname = Pidgin
# summary = *says*
# urgency = critical
#
#[twitter]
# appname = Pidgin
# summary = *twitter.com*
# urgency = normal
#
#[stack-volumes]
# appname = "some_volume_notifiers"
# set_stack_tag = "volume"
#
# vim: ft=cfg

4
i3/config
View File

@ -65,7 +65,7 @@ for_window [class="eog"] floating enable
for_window [class="Transmission-gtk"] floating enable
for_window [class="io.github.celluloid_player.Celluloid"] floating enable
for_window [class=".*"] border pixel 3
for_window [class=".*"] border pixel 1
# Use pactl to adjust volume in PulseAudio.
set $refresh_i3status killall -SIGUSR1 i3status
@ -203,7 +203,7 @@ gaps top 30
#
# Titlebars
#
default_border pixel 3
default_border pixel 1
default_floating_border normal
hide_edge_borders none

2
kitty/kitty.conf
View File

@ -444,7 +444,7 @@ initial_window_height 400
#: that setting a non-zero window margin overrides this and causes all
#: borders to be drawn.
window_margin_width 20
window_margin_width 15
#: The window margin (in pts) (blank area outside the border). A
#: single value sets all four sides. Two values set the vertical and

2
nwg-launchers/nwgbar/bar.json
View File

@ -1,7 +1,7 @@
[
{
"name": "Lock screen",
"exec": "swaylock -f",
"exec": "swaylock -f -c 000000",
"icon": "system-lock-screen"
},
{

22
nwg-launchers/nwgdmenu/style.css
View File

@ -1,22 +0,0 @@
/* Don't delete, just in case: the menu anchor is a button */
button {
background: none;
border-style: none;
box-shadow: none;
}
box {
/* Uncomment to set vertical margin
margin-top: 30px;
margin-bottom: 30px;
*/
}
#searchbox {
/* Adjust to your taste */
}
/* Menu items */
label {
padding-left: 5px
}

41
nwg-launchers/nwggrid/style.css
View File

@ -1,41 +0,0 @@
@import "/home/nick/.cache/wal/colors-waybar.css";
button, label, image {
background: none;
border: 2px solid rgba(200, 200, 200, 0);
box-shadow: none;
color: @color5;
}
button {
padding: 5px;
margin: 5px
}
button:hover {
background-color: @background;
}
button:focus {
border: 2px solid @color6;
}
#searchbox {
background: none;
border-color: @color6;
color: @color4;
margin-top: 20px;
margin-bottom: 20px
}
#separator {
background-color: rgba(200, 200, 200, 0.5);
margin-left: 500px;
margin-right: 500px;
margin-top: 10px;
margin-bottom: 10px
}
#description {
margin-bottom: 20px
}

1
nwg-launchers/nwggrid/terminal
View File

@ -1 +0,0 @@
kitty

2
picom/picom.conf
View File

@ -5,7 +5,7 @@ shadow-offset-y = -20;
shadow-exclude = [
"name = 'Notification'",
"name = 'polybar-bottom_eDP-1'",
"name = 'polybar-bottom_eDP'",
"class_g ?= 'Notify-osd'",
"_GTK_FRAME_EXTENTS@:c",
"class_g = 'i3-frame'",

14
polybar/config
View File

@ -33,6 +33,12 @@ type = custom/script
exec = ~/.config/waybar/modules/weather.sh
interval = 3600
[module/gpu]
type = custom/script
exec = ~/.config/waybar/modules/gpu/temp | jq '.text' | sed 's/"//g'
label = " %output%"
interval = 2
[module/swap]
type = custom/script
exec = free -h | grep Swap | awk '{print $3}'
@ -45,13 +51,13 @@ label = %title:0:30:...%
[module/home_storage]
type = custom/script
exec = df -h 2>/dev/null | grep sda3 | awk '{print $5}'
exec = df -h 2>/dev/null | grep nvme0n1p3 | awk '{print $5}'
label = " %output%"
interval = 30
[module/root_storage]
type = custom/script
exec = df -h 2>/dev/null | grep sda2 | awk '{print $5}'
exec = df -h 2>/dev/null | grep nvme0n1p2 | awk '{print $5}'
label = " %output%"
interval = 30
@ -240,9 +246,9 @@ font-4 = Font Awesome 5 Regular:pixelsize=8;2
font-5 = Noto Color Emoji:style=Regular:scale=12;2
font-0 = Source Code Pro Medium:weight=700:size=8;2
modules-left = date battery root_storage home_storage memory swap cpu
modules-left = date battery root_storage home_storage memory cpu
modules-center = i3
modules-right = covid weather updates my-updates backlight-acpi pulseaudio powermenu
modules-right = gpu covid weather updates my-updates backlight-acpi pulseaudio powermenu
cursor-click = pointer
cursor-scroll = ns-resize

2
polybar/launch.sh
View File

@ -11,7 +11,7 @@ if type "xrandr"; then
for m in $(xrandr --query | grep " connected" | cut -d" " -f1); do
MONITOR=$m polybar --reload top &
done
MONITOR="eDP-1" polybar --reload bottom &
MONITOR="eDP" polybar --reload bottom &
else
polybar --reload top &
polybar --reload bottom &

62
ranger/commands.py
View File

@ -1,62 +0,0 @@
# This is a sample commands.py. You can add your own commands here.
#
# Please refer to commands_full.py for all the default commands and a complete
# documentation. Do NOT add them all here, or you may end up with defunct
# commands when upgrading ranger.
# A simple command for demonstration purposes follows.
# -----------------------------------------------------------------------------
from __future__ import (absolute_import, division, print_function)
# You can import any python module as needed.
import os
# You always need to import ranger.api.commands here to get the Command class:
from ranger.api.commands import Command
# Any class that is a subclass of "Command" will be integrated into ranger as a
# command. Try typing ":my_edit<ENTER>" in ranger!
class my_edit(Command):
# The so-called doc-string of the class will be visible in the built-in
# help that is accessible by typing "?c" inside ranger.
""":my_edit <filename>
A sample command for demonstration purposes that opens a file in an editor.
"""
# The execute method is called when you run this command in ranger.
def execute(self):
# self.arg(1) is the first (space-separated) argument to the function.
# This way you can write ":my_edit somefilename<ENTER>".
if self.arg(1):
# self.rest(1) contains self.arg(1) and everything that follows
target_filename = self.rest(1)
else:
# self.fm is a ranger.core.filemanager.FileManager object and gives
# you access to internals of ranger.
# self.fm.thisfile is a ranger.container.file.File object and is a
# reference to the currently selected file.
target_filename = self.fm.thisfile.path
# This is a generic function to print text in ranger.
self.fm.notify("Let's edit the file " + target_filename + "!")
# Using bad=True in fm.notify allows you to print error messages:
if not os.path.exists(target_filename):
self.fm.notify("The given file does not exist!", bad=True)
return
# This executes a function from ranger.core.acitons, a module with a
# variety of subroutines that can help you construct commands.
# Check out the source, or run "pydoc ranger.core.actions" for a list.
self.fm.edit_file(target_filename)
# The tab method is called when you press tab, and should return a list of
# suggestions that the user will tab through.
# tabnum is 1 for <TAB> and -1 for <S-TAB> by default
def tab(self, tabnum):
# This is a generic tab-completion function that iterates through the
# content of the current directory.
return self._tab_directory_content()

1993
ranger/commands_full.py
View File

@ -1,1993 +0,0 @@
# -*- coding: utf-8 -*-
# This file is part of ranger, the console file manager.
# This configuration file is licensed under the same terms as ranger.
# ===================================================================
#
# NOTE: If you copied this file to /etc/ranger/commands_full.py or
# ~/.config/ranger/commands_full.py, then it will NOT be loaded by ranger,
# and only serve as a reference.
#
# ===================================================================
# This file contains ranger's commands.
# It's all in python; lines beginning with # are comments.
#
# Note that additional commands are automatically generated from the methods
# of the class ranger.core.actions.Actions.
#
# You can customize commands in the files /etc/ranger/commands.py (system-wide)
# and ~/.config/ranger/commands.py (per user).
# They have the same syntax as this file. In fact, you can just copy this
# file to ~/.config/ranger/commands_full.py with
# `ranger --copy-config=commands_full' and make your modifications, don't
# forget to rename it to commands.py. You can also use
# `ranger --copy-config=commands' to copy a short sample commands.py that
# has everything you need to get started.
# But make sure you update your configs when you update ranger.
#
# ===================================================================
# Every class defined here which is a subclass of `Command' will be used as a
# command in ranger. Several methods are defined to interface with ranger:
# execute(): called when the command is executed.
# cancel(): called when closing the console.
# tab(tabnum): called when <TAB> is pressed.
# quick(): called after each keypress.
#
# tab() argument tabnum is 1 for <TAB> and -1 for <S-TAB> by default
#
# The return values for tab() can be either:
# None: There is no tab completion
# A string: Change the console to this string
# A list/tuple/generator: cycle through every item in it
#
# The return value for quick() can be:
# False: Nothing happens
# True: Execute the command afterwards
#
# The return value for execute() and cancel() doesn't matter.
#
# ===================================================================
# Commands have certain attributes and methods that facilitate parsing of
# the arguments:
#
# self.line: The whole line that was written in the console.
# self.args: A list of all (space-separated) arguments to the command.
# self.quantifier: If this command was mapped to the key "X" and
# the user pressed 6X, self.quantifier will be 6.
# self.arg(n): The n-th argument, or an empty string if it doesn't exist.
# self.rest(n): The n-th argument plus everything that followed. For example,
# if the command was "search foo bar a b c", rest(2) will be "bar a b c"
# self.start(n): Anything before the n-th argument. For example, if the
# command was "search foo bar a b c", start(2) will be "search foo"
#
# ===================================================================
# And this is a little reference for common ranger functions and objects:
#
# self.fm: A reference to the "fm" object which contains most information
# about ranger.
# self.fm.notify(string): Print the given string on the screen.
# self.fm.notify(string, bad=True): Print the given string in RED.
# self.fm.reload_cwd(): Reload the current working directory.
# self.fm.thisdir: The current working directory. (A File object.)
# self.fm.thisfile: The current file. (A File object too.)
# self.fm.thistab.get_selection(): A list of all selected files.
# self.fm.execute_console(string): Execute the string as a ranger command.
# self.fm.open_console(string): Open the console with the given string
# already typed in for you.
# self.fm.move(direction): Moves the cursor in the given direction, which
# can be something like down=3, up=5, right=1, left=1, to=6, ...
#
# File objects (for example self.fm.thisfile) have these useful attributes and
# methods:
#
# tfile.path: The path to the file.
# tfile.basename: The base name only.
# tfile.load_content(): Force a loading of the directories content (which
# obviously works with directories only)
# tfile.is_directory: True/False depending on whether it's a directory.
#
# For advanced commands it is unavoidable to dive a bit into the source code
# of ranger.
# ===================================================================
from __future__ import (absolute_import, division, print_function)
from collections import deque
import os
import re
from ranger.api.commands import Command
class alias(Command):
""":alias <newcommand> <oldcommand>
Copies the oldcommand as newcommand.
"""
context = 'browser'
resolve_macros = False
def execute(self):
if not self.arg(1) or not self.arg(2):
self.fm.notify('Syntax: alias <newcommand> <oldcommand>', bad=True)
return
self.fm.commands.alias(self.arg(1), self.rest(2))
class echo(Command):
""":echo <text>
Display the text in the statusbar.
"""
def execute(self):
self.fm.notify(self.rest(1))
class cd(Command):
""":cd [-r] <path>
The cd command changes the directory.
If the path is a file, selects that file.
The command 'cd -' is equivalent to typing ``.
Using the option "-r" will get you to the real path.
"""
def execute(self):
if self.arg(1) == '-r':
self.shift()
destination = os.path.realpath(self.rest(1))
if os.path.isfile(destination):
self.fm.select_file(destination)
return
else:
destination = self.rest(1)
if not destination:
destination = '~'
if destination == '-':
self.fm.enter_bookmark('`')
else:
self.fm.cd(destination)
def _tab_args(self):
# dest must be rest because path could contain spaces
if self.arg(1) == '-r':
start = self.start(2)
dest = self.rest(2)
else:
start = self.start(1)
dest = self.rest(1)
if dest:
head, tail = os.path.split(os.path.expanduser(dest))
if head:
dest_exp = os.path.join(os.path.normpath(head), tail)
else:
dest_exp = tail
else:
dest_exp = ''
return (start, dest_exp, os.path.join(self.fm.thisdir.path, dest_exp),
dest.endswith(os.path.sep))
@staticmethod
def _tab_paths(dest, dest_abs, ends_with_sep):
if not dest:
try:
return next(os.walk(dest_abs))[1], dest_abs
except (OSError, StopIteration):
return [], ''
if ends_with_sep:
try:
return [os.path.join(dest, path) for path in next(os.walk(dest_abs))[1]], ''
except (OSError, StopIteration):
return [], ''
return None, None
def _tab_match(self, path_user, path_file):
if self.fm.settings.cd_tab_case == 'insensitive':
path_user = path_user.lower()
path_file = path_file.lower()
elif self.fm.settings.cd_tab_case == 'smart' and path_user.islower():
path_file = path_file.lower()
return path_file.startswith(path_user)
def _tab_normal(self, dest, dest_abs):
dest_dir = os.path.dirname(dest)
dest_base = os.path.basename(dest)
try:
dirnames = next(os.walk(os.path.dirname(dest_abs)))[1]
except (OSError, StopIteration):
return [], ''
return [os.path.join(dest_dir, d) for d in dirnames if self._tab_match(dest_base, d)], ''
def _tab_fuzzy_match(self, basepath, tokens):
""" Find directories matching tokens recursively """
if not tokens:
tokens = ['']
paths = [basepath]
while True:
token = tokens.pop()
matches = []
for path in paths:
try:
directories = next(os.walk(path))[1]
except (OSError, StopIteration):
continue
matches += [os.path.join(path, d) for d in directories
if self._tab_match(token, d)]
if not tokens or not matches:
return matches
paths = matches
return None
def _tab_fuzzy(self, dest, dest_abs):
tokens = []
basepath = dest_abs
while True:
basepath_old = basepath
basepath, token = os.path.split(basepath)
if basepath == basepath_old:
break
if os.path.isdir(basepath_old) and not token.startswith('.'):
basepath = basepath_old
break
tokens.append(token)
paths = self._tab_fuzzy_match(basepath, tokens)
if not os.path.isabs(dest):
paths_rel = self.fm.thisdir.path
paths = [os.path.relpath(os.path.join(basepath, path), paths_rel)
for path in paths]
else:
paths_rel = ''
return paths, paths_rel
def tab(self, tabnum):
from os.path import sep
start, dest, dest_abs, ends_with_sep = self._tab_args()
paths, paths_rel = self._tab_paths(dest, dest_abs, ends_with_sep)
if paths is None:
if self.fm.settings.cd_tab_fuzzy:
paths, paths_rel = self._tab_fuzzy(dest, dest_abs)
else:
paths, paths_rel = self._tab_normal(dest, dest_abs)
paths.sort()
if self.fm.settings.cd_bookmarks:
paths[0:0] = [
os.path.relpath(v.path, paths_rel) if paths_rel else v.path
for v in self.fm.bookmarks.dct.values() for path in paths
if v.path.startswith(os.path.join(paths_rel, path) + sep)
]
if not paths:
return None
if len(paths) == 1:
return start + paths[0] + sep
return [start + dirname + sep for dirname in paths]
class chain(Command):
""":chain <command1>; <command2>; ...
Calls multiple commands at once, separated by semicolons.
"""
resolve_macros = False
def execute(self):
if not self.rest(1).strip():
self.fm.notify('Syntax: chain <command1>; <command2>; ...', bad=True)
return
for command in [s.strip() for s in self.rest(1).split(";")]:
self.fm.execute_console(command)
class shell(Command):
escape_macros_for_shell = True
def execute(self):
if self.arg(1) and self.arg(1)[0] == '-':
flags = self.arg(1)[1:]
command = self.rest(2)
else:
flags = ''
command = self.rest(1)
if command:
self.fm.execute_command(command, flags=flags)
def tab(self, tabnum):
from ranger.ext.get_executables import get_executables
if self.arg(1) and self.arg(1)[0] == '-':
command = self.rest(2)
else:
command = self.rest(1)
start = self.line[0:len(self.line) - len(command)]
try:
position_of_last_space = command.rindex(" ")
except ValueError:
return (start + program + ' ' for program
in get_executables() if program.startswith(command))
if position_of_last_space == len(command) - 1:
selection = self.fm.thistab.get_selection()
if len(selection) == 1:
return self.line + selection[0].shell_escaped_basename + ' '
return self.line + '%s '
before_word, start_of_word = self.line.rsplit(' ', 1)
return (before_word + ' ' + file.shell_escaped_basename
for file in self.fm.thisdir.files or []
if file.shell_escaped_basename.startswith(start_of_word))
class open_with(Command):
def execute(self):
app, flags, mode = self._get_app_flags_mode(self.rest(1))
self.fm.execute_file(
files=[f for f in self.fm.thistab.get_selection()],
app=app,
flags=flags,
mode=mode)
def tab(self, tabnum):
return self._tab_through_executables()
def _get_app_flags_mode(self, string): # pylint: disable=too-many-branches,too-many-statements
"""Extracts the application, flags and mode from a string.
examples:
"mplayer f 1" => ("mplayer", "f", 1)
"atool 4" => ("atool", "", 4)
"p" => ("", "p", 0)
"" => None
"""
app = ''
flags = ''
mode = 0
split = string.split()
if len(split) == 1:
part = split[0]
if self._is_app(part):
app = part
elif self._is_flags(part):
flags = part
elif self._is_mode(part):
mode = part
elif len(split) == 2:
part0 = split[0]
part1 = split[1]
if self._is_app(part0):
app = part0
if self._is_flags(part1):
flags = part1
elif self._is_mode(part1):
mode = part1
elif self._is_flags(part0):
flags = part0
if self._is_mode(part1):
mode = part1
elif self._is_mode(part0):
mode = part0
if self._is_flags(part1):
flags = part1
elif len(split) >= 3:
part0 = split[0]
part1 = split[1]
part2 = split[2]
if self._is_app(part0):
app = part0
if self._is_flags(part1):
flags = part1
if self._is_mode(part2):
mode = part2
elif self._is_mode(part1):
mode = part1
if self._is_flags(part2):
flags = part2
elif self._is_flags(part0):
flags = part0
if self._is_mode(part1):
mode = part1
elif self._is_mode(part0):
mode = part0
if self._is_flags(part1):
flags = part1
return app, flags, int(mode)
def _is_app(self, arg):
return not self._is_flags(arg) and not arg.isdigit()
@staticmethod
def _is_flags(arg):
from ranger.core.runner import ALLOWED_FLAGS
return all(x in ALLOWED_FLAGS for x in arg)
@staticmethod
def _is_mode(arg):
return all(x in '0123456789' for x in arg)
class set_(Command):
""":set <option name>=<python expression>
Gives an option a new value.
Use `:set <option>!` to toggle or cycle it, e.g. `:set flush_input!`
"""
name = 'set' # don't override the builtin set class
def execute(self):
name = self.arg(1)
name, value, _, toggle = self.parse_setting_line_v2()
if toggle:
self.fm.toggle_option(name)
else:
self.fm.set_option_from_string(name, value)
def tab(self, tabnum): # pylint: disable=too-many-return-statements
from ranger.gui.colorscheme import get_all_colorschemes
name, value, name_done = self.parse_setting_line()
settings = self.fm.settings
if not name:
return sorted(self.firstpart + setting for setting in settings)
if not value and not name_done:
return sorted(self.firstpart + setting for setting in settings
if setting.startswith(name))
if not value:
value_completers = {
"colorscheme":
# Cycle through colorschemes when name, but no value is specified
lambda: sorted(self.firstpart + colorscheme for colorscheme
in get_all_colorschemes(self.fm)),
"column_ratios":
lambda: self.firstpart + ",".join(map(str, settings[name])),
}
def default_value_completer():
return self.firstpart + str(settings[name])
return value_completers.get(name, default_value_completer)()
if bool in settings.types_of(name):
if 'true'.startswith(value.lower()):
return self.firstpart + 'True'
if 'false'.startswith(value.lower()):
return self.firstpart + 'False'
# Tab complete colorscheme values if incomplete value is present
if name == "colorscheme":
return sorted(self.firstpart + colorscheme for colorscheme
in get_all_colorschemes(self.fm) if colorscheme.startswith(value))
return None
class setlocal(set_):
""":setlocal path=<regular expression> <option name>=<python expression>
Gives an option a new value.
"""
PATH_RE_DQUOTED = re.compile(r'^setlocal\s+path="(.*?)"')
PATH_RE_SQUOTED = re.compile(r"^setlocal\s+path='(.*?)'")
PATH_RE_UNQUOTED = re.compile(r'^path=(.*?)$')
def _re_shift(self, match):
if not match:
return None
path = os.path.expanduser(match.group(1))
for _ in range(len(path.split())):
self.shift()
return path
def execute(self):
path = self._re_shift(self.PATH_RE_DQUOTED.match(self.line))
if path is None:
path = self._re_shift(self.PATH_RE_SQUOTED.match(self.line))
if path is None:
path = self._re_shift(self.PATH_RE_UNQUOTED.match(self.arg(1)))
if path is None and self.fm.thisdir:
path = self.fm.thisdir.path
if not path:
return
name, value, _ = self.parse_setting_line()
self.fm.set_option_from_string(name, value, localpath=path)
class setintag(set_):
""":setintag <tag or tags> <option name>=<option value>
Sets an option for directories that are tagged with a specific tag.
"""
def execute(self):
tags = self.arg(1)
self.shift()
name, value, _ = self.parse_setting_line()
self.fm.set_option_from_string(name, value, tags=tags)
class default_linemode(Command):
def execute(self):
from ranger.container.fsobject import FileSystemObject
if len(self.args) < 2:
self.fm.notify(
"Usage: default_linemode [path=<regexp> | tag=<tag(s)>] <linemode>", bad=True)
# Extract options like "path=..." or "tag=..." from the command line
arg1 = self.arg(1)
method = "always"
argument = None
if arg1.startswith("path="):
method = "path"
argument = re.compile(arg1[5:])
self.shift()
elif arg1.startswith("tag="):
method = "tag"
argument = arg1[4:]
self.shift()
# Extract and validate the line mode from the command line
lmode = self.rest(1)
if lmode not in FileSystemObject.linemode_dict:
self.fm.notify(
"Invalid linemode: %s; should be %s" % (
lmode, "/".join(FileSystemObject.linemode_dict)),
bad=True,
)
# Add the prepared entry to the fm.default_linemodes
entry = [method, argument, lmode]
self.fm.default_linemodes.appendleft(entry)
# Redraw the columns
if self.fm.ui.browser:
for col in self.fm.ui.browser.columns:
col.need_redraw = True
def tab(self, tabnum):
return (self.arg(0) + " " + lmode
for lmode in self.fm.thisfile.linemode_dict.keys()
if lmode.startswith(self.arg(1)))
class quit(Command): # pylint: disable=redefined-builtin
""":quit
Closes the current tab, if there's more than one tab.
Otherwise quits if there are no tasks in progress.
"""
def _exit_no_work(self):
if self.fm.loader.has_work():
self.fm.notify('Not quitting: Tasks in progress: Use `quit!` to force quit')
else:
self.fm.exit()
def execute(self):
if len(self.fm.tabs) >= 2:
self.fm.tab_close()
else:
self._exit_no_work()
class quit_bang(Command):
""":quit!
Closes the current tab, if there's more than one tab.
Otherwise force quits immediately.
"""
name = 'quit!'
allow_abbrev = False
def execute(self):
if len(self.fm.tabs) >= 2:
self.fm.tab_close()
else:
self.fm.exit()
class quitall(Command):
""":quitall
Quits if there are no tasks in progress.
"""
def _exit_no_work(self):
if self.fm.loader.has_work():
self.fm.notify('Not quitting: Tasks in progress: Use `quitall!` to force quit')
else:
self.fm.exit()
def execute(self):
self._exit_no_work()
class quitall_bang(Command):
""":quitall!
Force quits immediately.
"""
name = 'quitall!'
allow_abbrev = False
def execute(self):
self.fm.exit()
class terminal(Command):
""":terminal
Spawns an "x-terminal-emulator" starting in the current directory.
"""
def execute(self):
from ranger.ext.get_executables import get_term
self.fm.run(get_term(), flags='f')
class delete(Command):
""":delete
Tries to delete the selection or the files passed in arguments (if any).
The arguments use a shell-like escaping.
"Selection" is defined as all the "marked files" (by default, you
can mark files with space or v). If there are no marked files,
use the "current file" (where the cursor is)
When attempting to delete non-empty directories or multiple
marked files, it will require a confirmation.
"""
allow_abbrev = False
escape_macros_for_shell = True
def execute(self):
import shlex
from functools import partial
def is_directory_with_files(path):
return os.path.isdir(path) and not os.path.islink(path) and len(os.listdir(path)) > 0
if self.rest(1):
files = shlex.split(self.rest(1))
many_files = (len(files) > 1 or is_directory_with_files(files[0]))
else:
cwd = self.fm.thisdir
tfile = self.fm.thisfile
if not cwd or not tfile:
self.fm.notify("Error: no file selected for deletion!", bad=True)
return
# relative_path used for a user-friendly output in the confirmation.
files = [f.relative_path for f in self.fm.thistab.get_selection()]
many_files = (cwd.marked_items or is_directory_with_files(tfile.path))
confirm = self.fm.settings.confirm_on_delete
if confirm != 'never' and (confirm != 'multiple' or many_files):
self.fm.ui.console.ask(
"Confirm deletion of: %s (y/N)" % ', '.join(files),
partial(self._question_callback, files),
('n', 'N', 'y', 'Y'),
)
else:
# no need for a confirmation, just delete
self.fm.delete(files)
def tab(self, tabnum):
return self._tab_directory_content()
def _question_callback(self, files, answer):
if answer == 'y' or answer == 'Y':
self.fm.delete(files)
class trash(Command):
""":trash
Tries to move the selection or the files passed in arguments (if any) to
the trash, using rifle rules with label "trash".
The arguments use a shell-like escaping.
"Selection" is defined as all the "marked files" (by default, you
can mark files with space or v). If there are no marked files,
use the "current file" (where the cursor is)
When attempting to trash non-empty directories or multiple
marked files, it will require a confirmation.
"""
allow_abbrev = False
escape_macros_for_shell = True
def execute(self):
import shlex
from functools import partial
def is_directory_with_files(path):
return os.path.isdir(path) and not os.path.islink(path) and len(os.listdir(path)) > 0
if self.rest(1):
files = shlex.split(self.rest(1))
many_files = (len(files) > 1 or is_directory_with_files(files[0]))
else:
cwd = self.fm.thisdir
tfile = self.fm.thisfile
if not cwd or not tfile:
self.fm.notify("Error: no file selected for deletion!", bad=True)
return
# relative_path used for a user-friendly output in the confirmation.
files = [f.relative_path for f in self.fm.thistab.get_selection()]
many_files = (cwd.marked_items or is_directory_with_files(tfile.path))
confirm = self.fm.settings.confirm_on_delete
if confirm != 'never' and (confirm != 'multiple' or many_files):
self.fm.ui.console.ask(
"Confirm deletion of: %s (y/N)" % ', '.join(files),
partial(self._question_callback, files),
('n', 'N', 'y', 'Y'),
)
else:
# no need for a confirmation, just delete
self.fm.execute_file(files, label='trash')
def tab(self, tabnum):
return self._tab_directory_content()
def _question_callback(self, files, answer):
if answer == 'y' or answer == 'Y':
self.fm.execute_file(files, label='trash')
class jump_non(Command):
""":jump_non [-FLAGS...]
Jumps to first non-directory if highlighted file is a directory and vice versa.
Flags:
-r Jump in reverse order
-w Wrap around if reaching end of filelist
"""
def __init__(self, *args, **kwargs):
super(jump_non, self).__init__(*args, **kwargs)
flags, _ = self.parse_flags()
self._flag_reverse = 'r' in flags
self._flag_wrap = 'w' in flags
@staticmethod
def _non(fobj, is_directory):
return fobj.is_directory if not is_directory else not fobj.is_directory
def execute(self):
tfile = self.fm.thisfile
passed = False
found_before = None
found_after = None
for fobj in self.fm.thisdir.files[::-1] if self._flag_reverse else self.fm.thisdir.files:
if fobj.path == tfile.path:
passed = True
continue
if passed:
if self._non(fobj, tfile.is_directory):
found_after = fobj.path
break
elif not found_before and self._non(fobj, tfile.is_directory):
found_before = fobj.path
if found_after:
self.fm.select_file(found_after)
elif self._flag_wrap and found_before:
self.fm.select_file(found_before)
class mark_tag(Command):
""":mark_tag [<tags>]
Mark all tags that are tagged with either of the given tags.
When leaving out the tag argument, all tagged files are marked.
"""
do_mark = True
def execute(self):
cwd = self.fm.thisdir
tags = self.rest(1).replace(" ", "")
if not self.fm.tags or not cwd.files:
return
for fileobj in cwd.files:
try:
tag = self.fm.tags.tags[fileobj.realpath]
except KeyError:
continue
if not tags or tag in tags:
cwd.mark_item(fileobj, val=self.do_mark)
self.fm.ui.status.need_redraw = True
self.fm.ui.need_redraw = True
class console(Command):
""":console <command>
Open the console with the given command.
"""
def execute(self):
position = None
if self.arg(1)[0:2] == '-p':
try:
position = int(self.arg(1)[2:])
except ValueError:
pass
else:
self.shift()
self.fm.open_console(self.rest(1), position=position)
class load_copy_buffer(Command):
""":load_copy_buffer
Load the copy buffer from datadir/copy_buffer
"""
copy_buffer_filename = 'copy_buffer'
def execute(self):
import sys
from ranger.container.file import File
from os.path import exists
fname = self.fm.datapath(self.copy_buffer_filename)
unreadable = IOError if sys.version_info[0] < 3 else OSError
try:
fobj = open(fname, 'r')
except unreadable:
return self.fm.notify(
"Cannot open %s" % (fname or self.copy_buffer_filename), bad=True)
self.fm.copy_buffer = set(File(g)
for g in fobj.read().split("\n") if exists(g))
fobj.close()
self.fm.ui.redraw_main_column()
return None
class save_copy_buffer(Command):
""":save_copy_buffer
Save the copy buffer to datadir/copy_buffer
"""
copy_buffer_filename = 'copy_buffer'
def execute(self):
import sys
fname = None
fname = self.fm.datapath(self.copy_buffer_filename)
unwritable = IOError if sys.version_info[0] < 3 else OSError
try:
fobj = open(fname, 'w')
except unwritable:
return self.fm.notify("Cannot open %s" %
(fname or self.copy_buffer_filename), bad=True)
fobj.write("\n".join(fobj.path for fobj in self.fm.copy_buffer))
fobj.close()
return None
class unmark_tag(mark_tag):
""":unmark_tag [<tags>]
Unmark all tags that are tagged with either of the given tags.
When leaving out the tag argument, all tagged files are unmarked.
"""
do_mark = False
class mkdir(Command):
""":mkdir <dirname>
Creates a directory with the name <dirname>.
"""
def execute(self):
from os.path import join, expanduser, lexists
from os import makedirs
dirname = join(self.fm.thisdir.path, expanduser(self.rest(1)))
if not lexists(dirname):
makedirs(dirname)
else:
self.fm.notify("file/directory exists!", bad=True)
def tab(self, tabnum):
return self._tab_directory_content()
class touch(Command):
""":touch <fname>
Creates a file with the name <fname>.
"""
def execute(self):
from os.path import join, expanduser, lexists
fname = join(self.fm.thisdir.path, expanduser(self.rest(1)))
if not lexists(fname):
open(fname, 'a').close()
else:
self.fm.notify("file/directory exists!", bad=True)
def tab(self, tabnum):
return self._tab_directory_content()
class edit(Command):
""":edit <filename>
Opens the specified file in vim
"""
def execute(self):
if not self.arg(1):
self.fm.edit_file(self.fm.thisfile.path)
else:
self.fm.edit_file(self.rest(1))
def tab(self, tabnum):
return self._tab_directory_content()
class eval_(Command):
""":eval [-q] <python code>
Evaluates the python code.
`fm' is a reference to the FM instance.
To display text, use the function `p'.
Examples:
:eval fm
:eval len(fm.directories)
:eval p("Hello World!")
"""
name = 'eval'
resolve_macros = False
def execute(self):
# The import is needed so eval() can access the ranger module
import ranger # NOQA pylint: disable=unused-import,unused-variable
if self.arg(1) == '-q':
code = self.rest(2)
quiet = True
else:
code = self.rest(1)
quiet = False
global cmd, fm, p, quantifier # pylint: disable=invalid-name,global-variable-undefined
fm = self.fm
cmd = self.fm.execute_console
p = fm.notify
quantifier = self.quantifier
try:
try:
result = eval(code) # pylint: disable=eval-used
except SyntaxError:
exec(code) # pylint: disable=exec-used
else:
if result and not quiet:
p(result)
except Exception as err: # pylint: disable=broad-except
fm.notify("The error `%s` was caused by evaluating the "
"following code: `%s`" % (err, code), bad=True)
class rename(Command):
""":rename <newname>
Changes the name of the currently highlighted file to <newname>
"""
def execute(self):
from ranger.container.file import File
from os import access
new_name = self.rest(1)
if not new_name:
return self.fm.notify('Syntax: rename <newname>', bad=True)
if new_name == self.fm.thisfile.relative_path:
return None
if access(new_name, os.F_OK):
return self.fm.notify("Can't rename: file already exists!", bad=True)
if self.fm.rename(self.fm.thisfile, new_name):
file_new = File(new_name)
self.fm.bookmarks.update_path(self.fm.thisfile.path, file_new)
self.fm.tags.update_path(self.fm.thisfile.path, file_new.path)
self.fm.thisdir.pointed_obj = file_new
self.fm.thisfile = file_new
return None
def tab(self, tabnum):
return self._tab_directory_content()
class rename_append(Command):
""":rename_append [-FLAGS...]
Opens the console with ":rename <current file>" with the cursor positioned
before the file extension.
Flags:
-a Position before all extensions
-r Remove everything before extensions
"""
def __init__(self, *args, **kwargs):
super(rename_append, self).__init__(*args, **kwargs)
flags, _ = self.parse_flags()
self._flag_ext_all = 'a' in flags
self._flag_remove = 'r' in flags
def execute(self):
from ranger import MACRO_DELIMITER, MACRO_DELIMITER_ESC
tfile = self.fm.thisfile
relpath = tfile.relative_path.replace(MACRO_DELIMITER, MACRO_DELIMITER_ESC)
basename = tfile.basename.replace(MACRO_DELIMITER, MACRO_DELIMITER_ESC)
if basename.find('.') <= 0 or os.path.isdir(relpath):
self.fm.open_console('rename ' + relpath)
return
if self._flag_ext_all:
pos_ext = re.search(r'[^.]+', basename).end(0)
else:
pos_ext = basename.rindex('.')
pos = len(relpath) - len(basename) + pos_ext
if self._flag_remove:
relpath = relpath[:-len(basename)] + basename[pos_ext:]
pos -= pos_ext
self.fm.open_console('rename ' + relpath, position=(7 + pos))
class chmod(Command):
""":chmod <octal number>
Sets the permissions of the selection to the octal number.
The octal number is between 0 and 777. The digits specify the
permissions for the user, the group and others.
A 1 permits execution, a 2 permits writing, a 4 permits reading.
Add those numbers to combine them. So a 7 permits everything.
"""
def execute(self):
mode_str = self.rest(1)
if not mode_str:
if self.quantifier is None:
self.fm.notify("Syntax: chmod <octal number> "
"or specify a quantifier", bad=True)
return
mode_str = str(self.quantifier)
try:
mode = int(mode_str, 8)
if mode < 0 or mode > 0o777:
raise ValueError
except ValueError:
self.fm.notify("Need an octal number between 0 and 777!", bad=True)
return
for fobj in self.fm.thistab.get_selection():
try:
os.chmod(fobj.path, mode)
except OSError as ex:
self.fm.notify(ex)
# reloading directory. maybe its better to reload the selected
# files only.
self.fm.thisdir.content_outdated = True
class bulkrename(Command):
""":bulkrename
This command opens a list of selected files in an external editor.
After you edit and save the file, it will generate a shell script
which does bulk renaming according to the changes you did in the file.
This shell script is opened in an editor for you to review.
After you close it, it will be executed.
"""
def execute(self):
# pylint: disable=too-many-locals,too-many-statements,too-many-branches
import sys
import tempfile
from ranger.container.file import File
from ranger.ext.shell_escape import shell_escape as esc
py3 = sys.version_info[0] >= 3
# Create and edit the file list
filenames = [f.relative_path for f in self.fm.thistab.get_selection()]
with tempfile.NamedTemporaryFile(delete=False) as listfile:
listpath = listfile.name
if py3:
listfile.write("\n".join(filenames).encode(
encoding="utf-8", errors="surrogateescape"))
else:
listfile.write("\n".join(filenames))
self.fm.execute_file([File(listpath)], app='editor')
with (open(listpath, 'r', encoding="utf-8", errors="surrogateescape") if
py3 else open(listpath, 'r')) as listfile:
new_filenames = listfile.read().split("\n")
os.unlink(listpath)
if all(a == b for a, b in zip(filenames, new_filenames)):
self.fm.notify("No renaming to be done!")
return
# Generate script
with tempfile.NamedTemporaryFile() as cmdfile:
script_lines = []
script_lines.append("# This file will be executed when you close"
" the editor.")
script_lines.append("# Please double-check everything, clear the"
" file to abort.")
new_dirs = []
for old, new in zip(filenames, new_filenames):
if old != new:
basepath, _ = os.path.split(new)
if (basepath and basepath not in new_dirs
and not os.path.isdir(basepath)):
script_lines.append("mkdir -vp -- {dir}".format(
dir=esc(basepath)))
new_dirs.append(basepath)
script_lines.append("mv -vi -- {old} {new}".format(
old=esc(old), new=esc(new)))
# Make sure not to forget the ending newline
script_content = "\n".join(script_lines) + "\n"
if py3:
cmdfile.write(script_content.encode(encoding="utf-8",
errors="surrogateescape"))
else:
cmdfile.write(script_content)
cmdfile.flush()
# Open the script and let the user review it, then check if the
# script was modified by the user
self.fm.execute_file([File(cmdfile.name)], app='editor')
cmdfile.seek(0)
script_was_edited = (script_content != cmdfile.read())
# Do the renaming
self.fm.run(['/bin/sh', cmdfile.name], flags='w')
# Retag the files, but only if the script wasn't changed during review,
# because only then we know which are the source and destination files.
if not script_was_edited:
tags_changed = False
for old, new in zip(filenames, new_filenames):
if old != new:
oldpath = self.fm.thisdir.path + '/' + old
newpath = self.fm.thisdir.path + '/' + new
if oldpath in self.fm.tags:
old_tag = self.fm.tags.tags[oldpath]
self.fm.tags.remove(oldpath)
self.fm.tags.tags[newpath] = old_tag
tags_changed = True
if tags_changed:
self.fm.tags.dump()
else:
fm.notify("files have not been retagged")
class relink(Command):
""":relink <newpath>
Changes the linked path of the currently highlighted symlink to <newpath>
"""
def execute(self):
new_path = self.rest(1)
tfile = self.fm.thisfile
if not new_path:
return self.fm.notify('Syntax: relink <newpath>', bad=True)
if not tfile.is_link:
return self.fm.notify('%s is not a symlink!' % tfile.relative_path, bad=True)
if new_path == os.readlink(tfile.path):
return None
try:
os.remove(tfile.path)
os.symlink(new_path, tfile.path)
except OSError as err:
self.fm.notify(err)
self.fm.reset()
self.fm.thisdir.pointed_obj = tfile
self.fm.thisfile = tfile
return None
def tab(self, tabnum):
if not self.rest(1):
return self.line + os.readlink(self.fm.thisfile.path)
return self._tab_directory_content()
class help_(Command):
""":help
Display ranger's manual page.
"""
name = 'help'
def execute(self):
def callback(answer):
if answer == "q":
return
elif answer == "m":
self.fm.display_help()
elif answer == "c":
self.fm.dump_commands()
elif answer == "k":
self.fm.dump_keybindings()
elif answer == "s":
self.fm.dump_settings()
self.fm.ui.console.ask(
"View [m]an page, [k]ey bindings, [c]ommands or [s]ettings? (press q to abort)",
callback,
list("mqkcs")
)
class copymap(Command):
""":copymap <keys> <newkeys1> [<newkeys2>...]
Copies a "browser" keybinding from <keys> to <newkeys>
"""
context = 'browser'
def execute(self):
if not self.arg(1) or not self.arg(2):
return self.fm.notify("Not enough arguments", bad=True)
for arg in self.args[2:]:
self.fm.ui.keymaps.copy(self.context, self.arg(1), arg)
return None
class copypmap(copymap):
""":copypmap <keys> <newkeys1> [<newkeys2>...]
Copies a "pager" keybinding from <keys> to <newkeys>
"""
context = 'pager'
class copycmap(copymap):
""":copycmap <keys> <newkeys1> [<newkeys2>...]
Copies a "console" keybinding from <keys> to <newkeys>
"""
context = 'console'
class copytmap(copymap):
""":copytmap <keys> <newkeys1> [<newkeys2>...]
Copies a "taskview" keybinding from <keys> to <newkeys>
"""
context = 'taskview'
class unmap(Command):
""":unmap <keys> [<keys2>, ...]
Remove the given "browser" mappings
"""
context = 'browser'
def execute(self):
for arg in self.args[1:]:
self.fm.ui.keymaps.unbind(self.context, arg)
class uncmap(unmap):
""":uncmap <keys> [<keys2>, ...]
Remove the given "console" mappings
"""
context = 'console'
class cunmap(uncmap):
""":cunmap <keys> [<keys2>, ...]
Remove the given "console" mappings
DEPRECATED in favor of uncmap.
"""
def execute(self):
self.fm.notify("cunmap is deprecated in favor of uncmap!")
super(cunmap, self).execute()
class unpmap(unmap):
""":unpmap <keys> [<keys2>, ...]
Remove the given "pager" mappings
"""
context = 'pager'
class punmap(unpmap):
""":punmap <keys> [<keys2>, ...]
Remove the given "pager" mappings
DEPRECATED in favor of unpmap.
"""
def execute(self):
self.fm.notify("punmap is deprecated in favor of unpmap!")
super(punmap, self).execute()
class untmap(unmap):
""":untmap <keys> [<keys2>, ...]
Remove the given "taskview" mappings
"""
context = 'taskview'
class tunmap(untmap):
""":tunmap <keys> [<keys2>, ...]
Remove the given "taskview" mappings
DEPRECATED in favor of untmap.
"""
def execute(self):
self.fm.notify("tunmap is deprecated in favor of untmap!")
super(tunmap, self).execute()
class map_(Command):
""":map <keysequence> <command>
Maps a command to a keysequence in the "browser" context.
Example:
map j move down
map J move down 10
"""
name = 'map'
context = 'browser'
resolve_macros = False
def execute(self):
if not self.arg(1) or not self.arg(2):
self.fm.notify("Syntax: {0} <keysequence> <command>".format(self.get_name()), bad=True)
return
self.fm.ui.keymaps.bind(self.context, self.arg(1), self.rest(2))
class cmap(map_):
""":cmap <keysequence> <command>
Maps a command to a keysequence in the "console" context.
Example:
cmap <ESC> console_close
cmap <C-x> console_type test
"""
context = 'console'
class tmap(map_):
""":tmap <keysequence> <command>
Maps a command to a keysequence in the "taskview" context.
"""
context = 'taskview'
class pmap(map_):
""":pmap <keysequence> <command>
Maps a command to a keysequence in the "pager" context.
"""
context = 'pager'
class scout(Command):
""":scout [-FLAGS...] <pattern>
Swiss army knife command for searching, traveling and filtering files.
Flags:
-a Automatically open a file on unambiguous match
-e Open the selected file when pressing enter
-f Filter files that match the current search pattern
-g Interpret pattern as a glob pattern
-i Ignore the letter case of the files
-k Keep the console open when changing a directory with the command
-l Letter skipping; e.g. allow "rdme" to match the file "readme"
-m Mark the matching files after pressing enter
-M Unmark the matching files after pressing enter
-p Permanent filter: hide non-matching files after pressing enter
-r Interpret pattern as a regular expression pattern
-s Smart case; like -i unless pattern contains upper case letters
-t Apply filter and search pattern as you type
-v Inverts the match
Multiple flags can be combined. For example, ":scout -gpt" would create
a :filter-like command using globbing.
"""
# pylint: disable=bad-whitespace
AUTO_OPEN = 'a'
OPEN_ON_ENTER = 'e'
FILTER = 'f'
SM_GLOB = 'g'
IGNORE_CASE = 'i'
KEEP_OPEN = 'k'
SM_LETTERSKIP = 'l'
MARK = 'm'
UNMARK = 'M'
PERM_FILTER = 'p'
SM_REGEX = 'r'
SMART_CASE = 's'
AS_YOU_TYPE = 't'
INVERT = 'v'
# pylint: enable=bad-whitespace
def __init__(self, *args, **kwargs):
super(scout, self).__init__(*args, **kwargs)
self._regex = None
self.flags, self.pattern = self.parse_flags()
def execute(self): # pylint: disable=too-many-branches
thisdir = self.fm.thisdir
flags = self.flags
pattern = self.pattern
regex = self._build_regex()
count = self._count(move=True)
self.fm.thistab.last_search = regex
self.fm.set_search_method(order="search")
if (self.MARK in flags or self.UNMARK in flags) and thisdir.files:
value = flags.find(self.MARK) > flags.find(self.UNMARK)
if self.FILTER in flags:
for fobj in thisdir.files:
thisdir.mark_item(fobj, value)
else:
for fobj in thisdir.files:
if regex.search(fobj.relative_path):
thisdir.mark_item(fobj, value)
if self.PERM_FILTER in flags:
thisdir.filter = regex if pattern else None
# clean up:
self.cancel()
if self.OPEN_ON_ENTER in flags or \
(self.AUTO_OPEN in flags and count == 1):
if pattern == '..':
self.fm.cd(pattern)
else:
self.fm.move(right=1)
if self.quickly_executed:
self.fm.block_input(0.5)
if self.KEEP_OPEN in flags and thisdir != self.fm.thisdir:
# reopen the console:
if not pattern:
self.fm.open_console(self.line)
else:
self.fm.open_console(self.line[0:-len(pattern)])
if self.quickly_executed and thisdir != self.fm.thisdir and pattern != "..":
self.fm.block_input(0.5)
def cancel(self):
self.fm.thisdir.temporary_filter = None
self.fm.thisdir.refilter()
def quick(self):
asyoutype = self.AS_YOU_TYPE in self.flags
if self.FILTER in self.flags:
self.fm.thisdir.temporary_filter = self._build_regex()
if self.PERM_FILTER in self.flags and asyoutype:
self.fm.thisdir.filter = self._build_regex()
if self.FILTER in self.flags or self.PERM_FILTER in self.flags:
self.fm.thisdir.refilter()
if self._count(move=asyoutype) == 1 and self.AUTO_OPEN in self.flags:
return True
return False
def tab(self, tabnum):
self._count(move=True, offset=tabnum)
def _build_regex(self):
if self._regex is not None:
return self._regex
frmat = "%s"
flags = self.flags
pattern = self.pattern
if pattern == ".":
return re.compile("")
# Handle carets at start and dollar signs at end separately
if pattern.startswith('^'):
pattern = pattern[1:]
frmat = "^" + frmat
if pattern.endswith('$'):
pattern = pattern[:-1]
frmat += "$"
# Apply one of the search methods
if self.SM_REGEX in flags:
regex = pattern
elif self.SM_GLOB in flags:
regex = re.escape(pattern).replace("\\*", ".*").replace("\\?", ".")
elif self.SM_LETTERSKIP in flags:
regex = ".*".join(re.escape(c) for c in pattern)
else:
regex = re.escape(pattern)
regex = frmat % regex
# Invert regular expression if necessary
if self.INVERT in flags:
regex = "^(?:(?!%s).)*$" % regex
# Compile Regular Expression
# pylint: disable=no-member
options = re.UNICODE
if self.IGNORE_CASE in flags or self.SMART_CASE in flags and \
pattern.islower():
options |= re.IGNORECASE
# pylint: enable=no-member
try:
self._regex = re.compile(regex, options)
except re.error:
self._regex = re.compile("")
return self._regex
def _count(self, move=False, offset=0):
count = 0
cwd = self.fm.thisdir
pattern = self.pattern
if not pattern or not cwd.files:
return 0
if pattern == '.':
return 0
if pattern == '..':
return 1
deq = deque(cwd.files)
deq.rotate(-cwd.pointer - offset)
i = offset
regex = self._build_regex()
for fsobj in deq:
if regex.search(fsobj.relative_path):
count += 1
if move and count == 1:
cwd.move(to=(cwd.pointer + i) % len(cwd.files))
self.fm.thisfile = cwd.pointed_obj
if count > 1:
return count
i += 1
return count == 1
class narrow(Command):
"""
:narrow
Show only the files selected right now. If no files are selected,
disable narrowing.
"""
def execute(self):
if self.fm.thisdir.marked_items:
selection = [f.basename for f in self.fm.thistab.get_selection()]
self.fm.thisdir.narrow_filter = selection
else:
self.fm.thisdir.narrow_filter = None
self.fm.thisdir.refilter()
class filter_inode_type(Command):
"""
:filter_inode_type [dfl]
Displays only the files of specified inode type. Parameters
can be combined.
d display directories
f display files
l display links
"""
def execute(self):
if not self.arg(1):
self.fm.thisdir.inode_type_filter = ""
else:
self.fm.thisdir.inode_type_filter = self.arg(1)
self.fm.thisdir.refilter()
class filter_stack(Command):
"""
:filter_stack ...
Manages the filter stack.
filter_stack add FILTER_TYPE ARGS...
filter_stack pop
filter_stack decompose
filter_stack rotate [N=1]
filter_stack clear
filter_stack show
"""
def execute(self):
from ranger.core.filter_stack import SIMPLE_FILTERS, FILTER_COMBINATORS
subcommand = self.arg(1)
if subcommand == "add":
try:
self.fm.thisdir.filter_stack.append(
SIMPLE_FILTERS[self.arg(2)](self.rest(3))
)
except KeyError:
FILTER_COMBINATORS[self.arg(2)](self.fm.thisdir.filter_stack)
elif subcommand == "pop":
self.fm.thisdir.filter_stack.pop()
elif subcommand == "decompose":
inner_filters = self.fm.thisdir.filter_stack.pop().decompose()
if inner_filters:
self.fm.thisdir.filter_stack.extend(inner_filters)
elif subcommand == "clear":
self.fm.thisdir.filter_stack = []
elif subcommand == "rotate":
rotate_by = int(self.arg(2) or self.quantifier or 1)
self.fm.thisdir.filter_stack = (
self.fm.thisdir.filter_stack[-rotate_by:]
+ self.fm.thisdir.filter_stack[:-rotate_by]
)
elif subcommand == "show":
stack = list(map(str, self.fm.thisdir.filter_stack))
pager = self.fm.ui.open_pager()
pager.set_source(["Filter stack: "] + stack)
pager.move(to=100, percentage=True)
return
else:
self.fm.notify(
"Unknown subcommand: {}".format(subcommand),
bad=True
)
return
self.fm.thisdir.refilter()
class grep(Command):
""":grep <string>
Looks for a string in all marked files or directories
"""
def execute(self):
if self.rest(1):
action = ['grep', '--line-number']
action.extend(['-e', self.rest(1), '-r'])
action.extend(f.path for f in self.fm.thistab.get_selection())
self.fm.execute_command(action, flags='p')
class flat(Command):
"""
:flat <level>
Flattens the directory view up to the specified level.
-1 fully flattened
0 remove flattened view
"""
def execute(self):
try:
level_str = self.rest(1)
level = int(level_str)
except ValueError:
level = self.quantifier
if level is None:
self.fm.notify("Syntax: flat <level>", bad=True)
return
if level < -1:
self.fm.notify("Need an integer number (-1, 0, 1, ...)", bad=True)
self.fm.thisdir.unload()
self.fm.thisdir.flat = level
self.fm.thisdir.load_content()
class reset_previews(Command):
""":reset_previews
Reset the file previews.
"""
def execute(self):
self.fm.previews = {}
self.fm.ui.need_redraw = True
# Version control commands
# --------------------------------
class stage(Command):
"""
:stage
Stage selected files for the corresponding version control system
"""
def execute(self):
from ranger.ext.vcs import VcsError
if self.fm.thisdir.vcs and self.fm.thisdir.vcs.track:
filelist = [f.path for f in self.fm.thistab.get_selection()]
try:
self.fm.thisdir.vcs.action_add(filelist)
except VcsError as ex:
self.fm.notify('Unable to stage files: {0}'.format(ex))
self.fm.ui.vcsthread.process(self.fm.thisdir)
else:
self.fm.notify('Unable to stage files: Not in repository')
class unstage(Command):
"""
:unstage
Unstage selected files for the corresponding version control system
"""
def execute(self):
from ranger.ext.vcs import VcsError
if self.fm.thisdir.vcs and self.fm.thisdir.vcs.track:
filelist = [f.path for f in self.fm.thistab.get_selection()]
try:
self.fm.thisdir.vcs.action_reset(filelist)
except VcsError as ex:
self.fm.notify('Unable to unstage files: {0}'.format(ex))
self.fm.ui.vcsthread.process(self.fm.thisdir)
else:
self.fm.notify('Unable to unstage files: Not in repository')
# Metadata commands
# --------------------------------
class prompt_metadata(Command):
"""
:prompt_metadata <key1> [<key2> [<key3> ...]]
Prompt the user to input metadata for multiple keys in a row.
"""
_command_name = "meta"
_console_chain = None
def execute(self):
prompt_metadata._console_chain = self.args[1:]
self._process_command_stack()
def _process_command_stack(self):
if prompt_metadata._console_chain:
key = prompt_metadata._console_chain.pop()
self._fill_console(key)
else:
for col in self.fm.ui.browser.columns:
col.need_redraw = True
def _fill_console(self, key):
metadata = self.fm.metadata.get_metadata(self.fm.thisfile.path)
if key in metadata and metadata[key]:
existing_value = metadata[key]
else:
existing_value = ""
text = "%s %s %s" % (self._command_name, key, existing_value)
self.fm.open_console(text, position=len(text))
class meta(prompt_metadata):
"""
:meta <key> [<value>]
Change metadata of a file. Deletes the key if value is empty.
"""
def execute(self):
key = self.arg(1)
update_dict = dict()
update_dict[key] = self.rest(2)
selection = self.fm.thistab.get_selection()
for fobj in selection:
self.fm.metadata.set_metadata(fobj.path, update_dict)
self._process_command_stack()
def tab(self, tabnum):
key = self.arg(1)
metadata = self.fm.metadata.get_metadata(self.fm.thisfile.path)
if key in metadata and metadata[key]:
return [" ".join([self.arg(0), self.arg(1), metadata[key]])]
return [self.arg(0) + " " + k for k in sorted(metadata)
if k.startswith(self.arg(1))]
class linemode(default_linemode):
"""
:linemode <mode>
Change what is displayed as a filename.
- "mode" may be any of the defined linemodes (see: ranger.core.linemode).
"normal" is mapped to "filename".
"""
def execute(self):
mode = self.arg(1)
if mode == "normal":
from ranger.core.linemode import DEFAULT_LINEMODE
mode = DEFAULT_LINEMODE
if mode not in self.fm.thisfile.linemode_dict:
self.fm.notify("Unhandled linemode: `%s'" % mode, bad=True)
return
self.fm.thisdir.set_linemode_of_children(mode)
# Ask the browsercolumns to redraw
for col in self.fm.ui.browser.columns:
col.need_redraw = True
class yank(Command):
""":yank [name|dir|path]
Copies the file's name (default), directory or path into both the primary X
selection and the clipboard.
"""
modes = {
'': 'basename',
'name_without_extension': 'basename_without_extension',
'name': 'basename',
'dir': 'dirname',
'path': 'path',
}
def execute(self):
import subprocess
def clipboards():
from ranger.ext.get_executables import get_executables
clipboard_managers = {
'xclip': [
['xclip'],
['xclip', '-selection', 'clipboard'],
],
'xsel': [
['xsel'],
['xsel', '-b'],
],
'wl-copy': [
['wl-copy'],
],
'pbcopy': [
['pbcopy'],
],
}
ordered_managers = ['pbcopy', 'wl-copy', 'xclip', 'xsel']
executables = get_executables()
for manager in ordered_managers:
if manager in executables:
return clipboard_managers[manager]
return []
clipboard_commands = clipboards()
mode = self.modes[self.arg(1)]
selection = self.get_selection_attr(mode)
new_clipboard_contents = "\n".join(selection)
for command in clipboard_commands:
process = subprocess.Popen(command, universal_newlines=True,
stdin=subprocess.PIPE)
process.communicate(input=new_clipboard_contents)
def get_selection_attr(self, attr):
return [getattr(item, attr) for item in
self.fm.thistab.get_selection()]
def tab(self, tabnum):
return (
self.start(1) + mode for mode
in sorted(self.modes.keys())
if mode
)
class paste_ext(Command):
"""
:paste_ext
Like paste but tries to rename conflicting files so that the
file extension stays intact (e.g. file_.ext).
"""
@staticmethod
def make_safe_path(dst):
if not os.path.exists(dst):
return dst
dst_name, dst_ext = os.path.splitext(dst)
if not dst_name.endswith("_"):
dst_name += "_"
if not os.path.exists(dst_name + dst_ext):
return dst_name + dst_ext
n = 0
test_dst = dst_name + str(n)
while os.path.exists(test_dst + dst_ext):
n += 1
test_dst = dst_name + str(n)
return test_dst + dst_ext
def execute(self):
return self.fm.paste(make_safe_path=paste_ext.make_safe_path)

759
ranger/rc.conf
View File

@ -1,759 +0,0 @@
# ===================================================================
# This file contains the default startup commands for ranger.
# To change them, it is recommended to create either /etc/ranger/rc.conf
# (system-wide) or ~/.config/ranger/rc.conf (per user) and add your custom
# commands there.
#
# If you copy this whole file there, you may want to set the environment
# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
#
# The purpose of this file is mainly to define keybindings and settings.
# For running more complex python code, please create a plugin in "plugins/" or
# a command in "commands.py".
#
# Each line is a command that will be run before the user interface
# is initialized. As a result, you can not use commands which rely
# on the UI such as :delete or :mark.
# ===================================================================
# ===================================================================
# == Options
# ===================================================================
# Which viewmode should be used? Possible values are:
# miller: Use miller columns which show multiple levels of the hierarchy
# multipane: Midnight-commander like multipane view showing all tabs next
# to each other
set viewmode miller
#set viewmode multipane
# How many columns are there, and what are their relative widths?
set column_ratios 1,3,4
# Which files should be hidden? (regular expression)
set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
# Show hidden files? You can toggle this by typing 'zh'
set show_hidden false
# Ask for a confirmation when running the "delete" command?
# Valid values are "always", "never", "multiple" (default)
# With "multiple", ranger will ask only if you delete multiple files at once.
set confirm_on_delete multiple
# Use non-default path for file preview script?
# ranger ships with scope.sh, a script that calls external programs (see
# README.md for dependencies) to preview images, archives, etc.
#set preview_script ~/.config/ranger/scope.sh
# Use the external preview script or display simple plain text or image previews?
set use_preview_script true
# Automatically count files in the directory, even before entering them?
set automatically_count_files true
# Open all images in this directory when running certain image viewers
# like feh or sxiv? You can still open selected files by marking them.
set open_all_images true
# Be aware of version control systems and display information.
set vcs_aware false
# State of the four backends git, hg, bzr, svn. The possible states are
# disabled, local (only show local info), enabled (show local and remote
# information).
set vcs_backend_git enabled
set vcs_backend_hg disabled
set vcs_backend_bzr disabled
set vcs_backend_svn disabled
# Truncate the long commit messages to this length when shown in the statusbar.
set vcs_msg_length 50
# Use one of the supported image preview protocols
set preview_images true
# Set the preview image method. Supported methods:
#
# * w3m (default):
# Preview images in full color with the external command "w3mimgpreview"?
# This requires the console web browser "w3m" and a supported terminal.
# It has been successfully tested with "xterm" and "urxvt" without tmux.
#
# * iterm2:
# Preview images in full color using iTerm2 image previews
# (http://iterm2.com/images.html). This requires using iTerm2 compiled
# with image preview support.
#
# This feature relies on the dimensions of the terminal's font. By default, a
# width of 8 and height of 11 are used. To use other values, set the options
# iterm2_font_width and iterm2_font_height to the desired values.
#
# * terminology:
# Previews images in full color in the terminology terminal emulator.
# Supports a wide variety of formats, even vector graphics like svg.
#
# * urxvt:
# Preview images in full color using urxvt image backgrounds. This
# requires using urxvt compiled with pixbuf support.
#
# * urxvt-full:
# The same as urxvt but utilizing not only the preview pane but the
# whole terminal window.
#
# * kitty:
# Preview images in full color using kitty image protocol.
# Requires python PIL or pillow library.
# If ranger does not share the local filesystem with kitty
# the transfer method is changed to encode the whole image;
# while slower, this allows remote previews,
# for example during an ssh session.
# Tmux is unsupported.
#
# * ueberzug:
# Preview images in full color with the external command "ueberzug".
# Images are shown by using a child window.
# Only for users who run X11 in GNU/Linux.
set preview_images_method kitty
# Delay in seconds before displaying an image with the w3m method.
# Increase it in case of experiencing display corruption.
set w3m_delay 0.02
# Manually adjust the w3mimg offset when using a terminal which needs this
set w3m_offset 0
# Default iTerm2 font size (see: preview_images_method: iterm2)
set iterm2_font_width 8
set iterm2_font_height 11
# Use a unicode "..." character to mark cut-off filenames?
set unicode_ellipsis false
# BIDI support - try to properly display file names in RTL languages (Hebrew, Arabic).
# Requires the python-bidi pip package
set bidi_support false
# Show dotfiles in the bookmark preview box?
set show_hidden_bookmarks true
# Which colorscheme to use? These colorschemes are available by default:
# default, jungle, snow, solarized
set colorscheme default
# Preview files on the rightmost column?
# And collapse (shrink) the last column if there is nothing to preview?
set preview_files true
set preview_directories true
set collapse_preview true
# Wrap long lines in plain text previews?
set wrap_plaintext_previews false
# Save the console history on exit?
set save_console_history true
# Draw the status bar on top of the browser window (default: bottom)
set status_bar_on_top false
# Draw a progress bar in the status bar which displays the average state of all
# currently running tasks which support progress bars?
set draw_progress_bar_in_status_bar true
# Draw borders around columns? (separators, outline, both, or none)
# Separators are vertical lines between columns.
# Outline draws a box around all the columns.
# Both combines the two.
set draw_borders none
# Display the directory name in tabs?
set dirname_in_tabs false
# Enable the mouse support?
set mouse_enabled true
# Display the file size in the main column or status bar?
set display_size_in_main_column true
set display_size_in_status_bar true
# Display the free disk space in the status bar?
set display_free_space_in_status_bar true
# Display files tags in all columns or only in main column?
set display_tags_in_all_columns true
# Set a title for the window? Updates both `WM_NAME` and `WM_ICON_NAME`
set update_title false
# Set the tmux/screen window-name to "ranger"?
set update_tmux_title true
# Shorten the title if it gets long? The number defines how many
# directories are displayed at once, 0 turns off this feature.
set shorten_title 3
# Show hostname in titlebar?
set hostname_in_titlebar true
# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
set tilde_in_titlebar false
# How many directory-changes or console-commands should be kept in history?
set max_history_size 20
set max_console_history_size 50
# Try to keep so much space between the top/bottom border when scrolling:
set scroll_offset 8
# Flush the input after each key hit? (Noticeable when ranger lags)
set flushinput true
# Padding on the right when there's no preview?
# This allows you to click into the space to run the file.
set padding_right true
# Save bookmarks (used with mX and `X) instantly?
# This helps to synchronize bookmarks between multiple ranger
# instances but leads to *slight* performance loss.
# When false, bookmarks are saved when ranger is exited.
set autosave_bookmarks true
# Save the "`" bookmark to disk. This can be used to switch to the last
# directory by typing "``".
set save_backtick_bookmark true
# You can display the "real" cumulative size of directories by using the
# command :get_cumulative_size or typing "dc". The size is expensive to
# calculate and will not be updated automatically. You can choose
# to update it automatically though by turning on this option:
set autoupdate_cumulative_size false
# Turning this on makes sense for screen readers:
set show_cursor false
# One of: size, natural, basename, atime, ctime, mtime, type, random
set sort natural
# Additional sorting options
set sort_reverse false
set sort_case_insensitive true
set sort_directories_first true
set sort_unicode false
# Enable this if key combinations with the Alt Key don't work for you.
# (Especially on xterm)
set xterm_alt_key false
# Whether to include bookmarks in cd command
set cd_bookmarks true
# Changes case sensitivity for the cd command tab completion
set cd_tab_case sensitive
# Use fuzzy tab completion with the "cd" command. For example,
# ":cd /u/lo/b<tab>" expands to ":cd /usr/local/bin".
set cd_tab_fuzzy false
# Avoid previewing files larger than this size, in bytes. Use a value of 0 to
# disable this feature.
set preview_max_size 0
# The key hint lists up to this size have their sublists expanded.
# Otherwise the submaps are replaced with "...".
set hint_collapse_threshold 10
# Add the highlighted file to the path in the titlebar
set show_selection_in_titlebar true
# The delay that ranger idly waits for user input, in milliseconds, with a
# resolution of 100ms. Lower delay reduces lag between directory updates but
# increases CPU load.
set idle_delay 2000
# When the metadata manager module looks for metadata, should it only look for
# a ".metadata.json" file in the current directory, or do a deep search and
# check all directories above the current one as well?
set metadata_deep_search false
# Clear all existing filters when leaving a directory
set clear_filters_on_dir_change false
# Disable displaying line numbers in main column.
# Possible values: false, absolute, relative.
set line_numbers false
# When line_numbers=relative show the absolute line number in the
# current line.
set relative_current_zero false
# Start line numbers from 1 instead of 0
set one_indexed false
# Save tabs on exit
set save_tabs_on_exit false
# Enable scroll wrapping - moving down while on the last item will wrap around to
# the top and vice versa.
set wrap_scroll false
# Set the global_inode_type_filter to nothing. Possible options: d, f and l for
# directories, files and symlinks respectively.
set global_inode_type_filter
# This setting allows to freeze the list of files to save I/O bandwidth. It
# should be 'false' during start-up, but you can toggle it by pressing F.
set freeze_files false
# Print file sizes in bytes instead of the default human-readable format.
set size_in_bytes false
# Warn at startup if RANGER_LEVEL env var is greater than 0, in other words
# give a warning when you nest ranger in a subshell started by ranger.
# Special value "error" makes the warning more visible.
set nested_ranger_warning true
# ===================================================================
# == Local Options
# ===================================================================
# You can set local options that only affect a single directory.
# Examples:
# setlocal path=~/downloads sort mtime
# ===================================================================
# == Command Aliases in the Console
# ===================================================================
alias e edit
alias q quit
alias q! quit!
alias qa quitall
alias qa! quitall!
alias qall quitall
alias qall! quitall!
alias setl setlocal
alias filter scout -prts
alias find scout -aets
alias mark scout -mr
alias unmark scout -Mr
alias search scout -rs
alias search_inc scout -rts
alias travel scout -aefklst
# ===================================================================
# == Define keys for the browser
# ===================================================================
# Basic
map Q quitall
map q quit
copymap q ZZ ZQ
map R reload_cwd
map F set freeze_files!
map <C-r> reset
map <C-l> redraw_window
map <C-c> abort
map <esc> change_mode normal
map ~ set viewmode!
map i display_file
map <A-j> scroll_preview 1
map <A-k> scroll_preview -1
map ? help
map W display_log
map w taskview_open
map S shell $SHELL
map : console
map ; console
map ! console shell%space
map @ console -p6 shell %%s
map # console shell -p%space
map s console shell%space
map r chain draw_possible_programs; console open_with%space
map f console find%space
map cd console cd%space
map <C-p> chain console; eval fm.ui.console.history_move(-1)
# Change the line mode
map Mf linemode filename
map Mi linemode fileinfo
map Mm linemode mtime
map Mh linemode humanreadablemtime
map Mp linemode permissions
map Ms linemode sizemtime
map MH linemode sizehumanreadablemtime
map Mt linemode metatitle
# Tagging / Marking
map t tag_toggle
map ut tag_remove
map "<any> tag_toggle tag=%any
map <Space> mark_files toggle=True
map v mark_files all=True toggle=True
map uv mark_files all=True val=False
map V toggle_visual_mode
map uV toggle_visual_mode reverse=True
# For the nostalgics: Midnight Commander bindings
map <F1> help
map <F2> rename_append
map <F3> display_file
map <F4> edit
map <F5> copy
map <F6> cut
map <F7> console mkdir%space
map <F8> console delete
#map <F8> console trash
map <F10> exit
# In case you work on a keyboard with dvorak layout
map <UP> move up=1
map <DOWN> move down=1
map <LEFT> move left=1
map <RIGHT> move right=1
map <HOME> move to=0
map <END> move to=-1
map <PAGEDOWN> move down=1 pages=True
map <PAGEUP> move up=1 pages=True
map <CR> move right=1
#map <DELETE> console delete
map <INSERT> console touch%space
# VIM-like
copymap <UP> k
copymap <DOWN> j
copymap <LEFT> h
copymap <RIGHT> l
copymap <HOME> gg
copymap <END> G
copymap <PAGEDOWN> <C-F>
copymap <PAGEUP> <C-B>
map J move down=0.5 pages=True
map K move up=0.5 pages=True
copymap J <C-D>
copymap K <C-U>
# Jumping around
map H history_go -1
map L history_go 1
map ] move_parent 1
map [ move_parent -1
map } traverse
map { traverse_backwards
map ) jump_non
map gh cd ~
map ge cd /etc
map gu cd /usr
map gd cd /dev
map gl cd -r .
map gL cd -r %f
map go cd /opt
map gv cd /var
map gm cd /media
map gi eval fm.cd('/run/media/' + os.getenv('USER'))
map gM cd /mnt
map gs cd /srv
map gp cd /tmp
map gr cd /
map gR eval fm.cd(ranger.RANGERDIR)
map g/ cd /
map g? cd /usr/share/doc/ranger
# External Programs
map E edit
map du shell -p du --max-depth=1 -h --apparent-size
map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
map yp yank path
map yd yank dir
map yn yank name
map y. yank name_without_extension
# Filesystem Operations
map = chmod
map cw console rename%space
map a rename_append
map A eval fm.open_console('rename ' + fm.thisfile.relative_path.replace("%", "%%"))
map I eval fm.open_console('rename ' + fm.thisfile.relative_path.replace("%", "%%"), position=7)
map pp paste
map po paste overwrite=True
map pP paste append=True
map pO paste overwrite=True append=True
map pl paste_symlink relative=False
map pL paste_symlink relative=True
map phl paste_hardlink
map pht paste_hardlinked_subtree
map pd console paste dest=
map p`<any> paste dest=%any_path
map p'<any> paste dest=%any_path
map dD console delete
map dT console trash
map dd cut
map ud uncut
map da cut mode=add
map dr cut mode=remove
map dt cut mode=toggle
map yy copy
map uy uncut
map ya copy mode=add
map yr copy mode=remove
map yt copy mode=toggle
# Temporary workarounds
map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
# Searching
map / console search%space
map n search_next
map N search_next forward=False
map ct search_next order=tag
map cs search_next order=size
map ci search_next order=mimetype
map cc search_next order=ctime
map cm search_next order=mtime
map ca search_next order=atime
# Tabs
map <C-n> tab_new
map <C-w> tab_close
map <TAB> tab_move 1
map <S-TAB> tab_move -1
map <A-Right> tab_move 1
map <A-Left> tab_move -1
map gt tab_move 1
map gT tab_move -1
map gn tab_new
map gc tab_close
map uq tab_restore
map <a-1> tab_open 1
map <a-2> tab_open 2
map <a-3> tab_open 3
map <a-4> tab_open 4
map <a-5> tab_open 5
map <a-6> tab_open 6
map <a-7> tab_open 7
map <a-8> tab_open 8
map <a-9> tab_open 9
map <a-r> tab_shift 1
map <a-l> tab_shift -1
# Sorting
map or set sort_reverse!
map oz set sort=random
map os chain set sort=size; set sort_reverse=False
map ob chain set sort=basename; set sort_reverse=False
map on chain set sort=natural; set sort_reverse=False
map om chain set sort=mtime; set sort_reverse=False
map oc chain set sort=ctime; set sort_reverse=False
map oa chain set sort=atime; set sort_reverse=False
map ot chain set sort=type; set sort_reverse=False
map oe chain set sort=extension; set sort_reverse=False
map oS chain set sort=size; set sort_reverse=True
map oB chain set sort=basename; set sort_reverse=True
map oN chain set sort=natural; set sort_reverse=True
map oM chain set sort=mtime; set sort_reverse=True
map oC chain set sort=ctime; set sort_reverse=True
map oA chain set sort=atime; set sort_reverse=True
map oT chain set sort=type; set sort_reverse=True
map oE chain set sort=extension; set sort_reverse=True
map dc get_cumulative_size
# Settings
map zc set collapse_preview!
map zd set sort_directories_first!
map zh set show_hidden!
map <C-h> set show_hidden!
copymap <C-h> <backspace>
copymap <backspace> <backspace2>
map zI set flushinput!
map zi set preview_images!
map zm set mouse_enabled!
map zp set preview_files!
map zP set preview_directories!
map zs set sort_case_insensitive!
map zu set autoupdate_cumulative_size!
map zv set use_preview_script!
map zf console filter%space
copymap zf zz
# Filter stack
map .d filter_stack add type d
map .f filter_stack add type f
map .l filter_stack add type l
map .m console filter_stack add mime%space
map .n console filter_stack add name%space
map .# console filter_stack add hash%space
map ." filter_stack add duplicate
map .' filter_stack add unique
map .| filter_stack add or
map .& filter_stack add and
map .! filter_stack add not
map .r filter_stack rotate
map .c filter_stack clear
map .* filter_stack decompose
map .p filter_stack pop
map .. filter_stack show
# Bookmarks
map `<any> enter_bookmark %any
map '<any> enter_bookmark %any
map m<any> set_bookmark %any
map um<any> unset_bookmark %any
map m<bg> draw_bookmarks
copymap m<bg> um<bg> `<bg> '<bg>
# Generate all the chmod bindings with some python help:
eval for arg in "rwxXst": cmd("map +u{0} shell -f chmod u+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +g{0} shell -f chmod g+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +o{0} shell -f chmod o+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +a{0} shell -f chmod a+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +{0} shell -f chmod u+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -u{0} shell -f chmod u-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -g{0} shell -f chmod g-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -o{0} shell -f chmod o-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -a{0} shell -f chmod a-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -{0} shell -f chmod u-{0} %s".format(arg))
# ===================================================================
# == Define keys for the console
# ===================================================================
# Note: Unmapped keys are passed directly to the console.
# Basic
cmap <tab> eval fm.ui.console.tab()
cmap <s-tab> eval fm.ui.console.tab(-1)
cmap <ESC> eval fm.ui.console.close()
cmap <CR> eval fm.ui.console.execute()
cmap <C-l> redraw_window
copycmap <ESC> <C-c>
copycmap <CR> <C-j>
# Move around
cmap <up> eval fm.ui.console.history_move(-1)
cmap <down> eval fm.ui.console.history_move(1)
cmap <left> eval fm.ui.console.move(left=1)
cmap <right> eval fm.ui.console.move(right=1)
cmap <home> eval fm.ui.console.move(right=0, absolute=True)
cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
cmap <a-b> eval fm.ui.console.move_word(left=1)
cmap <a-f> eval fm.ui.console.move_word(right=1)
copycmap <a-b> <a-left>
copycmap <a-f> <a-right>
# Line Editing
cmap <backspace> eval fm.ui.console.delete(-1)
cmap <delete> eval fm.ui.console.delete(0)
cmap <C-w> eval fm.ui.console.delete_word()
cmap <A-d> eval fm.ui.console.delete_word(backward=False)
cmap <C-k> eval fm.ui.console.delete_rest(1)
cmap <C-u> eval fm.ui.console.delete_rest(-1)
cmap <C-y> eval fm.ui.console.paste()
# And of course the emacs way
copycmap <ESC> <C-g>
copycmap <up> <C-p>
copycmap <down> <C-n>
copycmap <left> <C-b>
copycmap <right> <C-f>
copycmap <home> <C-a>
copycmap <end> <C-e>
copycmap <delete> <C-d>
copycmap <backspace> <C-h>
# Note: There are multiple ways to express backspaces. <backspace> (code 263)
# and <backspace2> (code 127). To be sure, use both.
copycmap <backspace> <backspace2>
# This special expression allows typing in numerals:
cmap <allow_quantifiers> false
# ===================================================================
# == Pager Keybindings
# ===================================================================
# Movement
pmap <down> pager_move down=1
pmap <up> pager_move up=1
pmap <left> pager_move left=4
pmap <right> pager_move right=4
pmap <home> pager_move to=0
pmap <end> pager_move to=-1
pmap <pagedown> pager_move down=1.0 pages=True
pmap <pageup> pager_move up=1.0 pages=True
pmap <C-d> pager_move down=0.5 pages=True
pmap <C-u> pager_move up=0.5 pages=True
copypmap <UP> k <C-p>
copypmap <DOWN> j <C-n> <CR>
copypmap <LEFT> h
copypmap <RIGHT> l
copypmap <HOME> g
copypmap <END> G
copypmap <C-d> d
copypmap <C-u> u
copypmap <PAGEDOWN> n f <C-F> <Space>
copypmap <PAGEUP> p b <C-B>
# Basic
pmap <C-l> redraw_window
pmap <ESC> pager_close
copypmap <ESC> q Q i <F3>
pmap E edit_file
# ===================================================================
# == Taskview Keybindings
# ===================================================================
# Movement
tmap <up> taskview_move up=1
tmap <down> taskview_move down=1
tmap <home> taskview_move to=0
tmap <end> taskview_move to=-1
tmap <pagedown> taskview_move down=1.0 pages=True
tmap <pageup> taskview_move up=1.0 pages=True
tmap <C-d> taskview_move down=0.5 pages=True
tmap <C-u> taskview_move up=0.5 pages=True
copytmap <UP> k <C-p>
copytmap <DOWN> j <C-n> <CR>
copytmap <HOME> g
copytmap <END> G
copytmap <C-u> u
copytmap <PAGEDOWN> n f <C-F> <Space>
copytmap <PAGEUP> p b <C-B>
# Changing priority and deleting tasks
tmap J eval -q fm.ui.taskview.task_move(-1)
tmap K eval -q fm.ui.taskview.task_move(0)
tmap dd eval -q fm.ui.taskview.task_remove()
tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
tmap <pageup> eval -q fm.ui.taskview.task_move(0)
tmap <delete> eval -q fm.ui.taskview.task_remove()
# Basic
tmap <C-l> redraw_window
tmap <ESC> taskview_close
copytmap <ESC> q Q w <C-c>

286
ranger/rifle.conf
View File

@ -1,286 +0,0 @@
# vim: ft=cfg
#
# This is the configuration file of "rifle", ranger's file executor/opener.
# Each line consists of conditions and a command. For each line the conditions
# are checked and if they are met, the respective command is run.
#
# Syntax:
# <condition1> , <condition2> , ... = command
#
# The command can contain these environment variables:
# $1-$9 | The n-th selected file
# $@ | All selected files
#
# If you use the special command "ask", rifle will ask you what program to run.
#
# Prefixing a condition with "!" will negate its result.
# These conditions are currently supported:
# match <regexp> | The regexp matches $1
# ext <regexp> | The regexp matches the extension of $1
# mime <regexp> | The regexp matches the mime type of $1
# name <regexp> | The regexp matches the basename of $1
# path <regexp> | The regexp matches the absolute path of $1
# has <program> | The program is installed (i.e. located in $PATH)
# env <variable> | The environment variable "variable" is non-empty
# file | $1 is a file
# directory | $1 is a directory
# number <n> | change the number of this command to n
# terminal | stdin, stderr and stdout are connected to a terminal
# X | A graphical environment is available (darwin, Xorg, or Wayland)
#
# There are also pseudo-conditions which have a "side effect":
# flag <flags> | Change how the program is run. See below.
# label <label> | Assign a label or name to the command so it can
# | be started with :open_with <label> in ranger
# | or `rifle -p <label>` in the standalone executable.
# else | Always true.
#
# Flags are single characters which slightly transform the command:
# f | Fork the program, make it run in the background.
# | New command = setsid $command >& /dev/null &
# r | Execute the command with root permissions
# | New command = sudo $command
# t | Run the program in a new terminal. If $TERMCMD is not defined,
# | rifle will attempt to extract it from $TERM.
# | New command = $TERMCMD -e $command
# Note: The "New command" serves only as an illustration, the exact
# implementation may differ.
# Note: When using rifle in ranger, there is an additional flag "c" for
# only running the current file even if you have marked multiple files.
#-------------------------------------------
# Websites
#-------------------------------------------
# Rarely installed browsers get higher priority; It is assumed that if you
# install a rare browser, you probably use it. Firefox/konqueror/w3m on the
# other hand are often only installed as fallback browsers.
ext x?html?, has surf, X, flag f = surf -- file://"$1"
ext x?html?, has vimprobable, X, flag f = vimprobable -- "$@"
ext x?html?, has vimprobable2, X, flag f = vimprobable2 -- "$@"
ext x?html?, has qutebrowser, X, flag f = qutebrowser -- "$@"
ext x?html?, has dwb, X, flag f = dwb -- "$@"
ext x?html?, has jumanji, X, flag f = jumanji -- "$@"
ext x?html?, has luakit, X, flag f = luakit -- "$@"
ext x?html?, has uzbl, X, flag f = uzbl -- "$@"
ext x?html?, has uzbl-tabbed, X, flag f = uzbl-tabbed -- "$@"
ext x?html?, has uzbl-browser, X, flag f = uzbl-browser -- "$@"
ext x?html?, has uzbl-core, X, flag f = uzbl-core -- "$@"
ext x?html?, has midori, X, flag f = midori -- "$@"
ext x?html?, has opera, X, flag f = opera -- "$@"
ext x?html?, has wivaldi, X, flag f = wivaldi -- "$@"
ext x?html?, has vivaldi, X, flag f = vivaldi -- "$@"
ext x?html?, has firefox, X, flag f = firefox -- "$@"
ext x?html?, has seamonkey, X, flag f = seamonkey -- "$@"
ext x?html?, has iceweasel, X, flag f = iceweasel -- "$@"
ext x?html?, has chromium-browser, X, flag f = chromium-browser -- "$@"
ext x?html?, has chromium, X, flag f = chromium -- "$@"
ext x?html?, has google-chrome, X, flag f = google-chrome -- "$@"
ext x?html?, has epiphany, X, flag f = epiphany -- "$@"
ext x?html?, has konqueror, X, flag f = konqueror -- "$@"
ext x?html?, has elinks, terminal = elinks "$@"
ext x?html?, has links2, terminal = links2 "$@"
ext x?html?, has links, terminal = links "$@"
ext x?html?, has lynx, terminal = lynx -- "$@"
ext x?html?, has w3m, terminal = w3m "$@"
#-------------------------------------------
# Misc
#-------------------------------------------
# Define the "editor" for text files as first action
mime ^text, label editor = ${VISUAL:-$EDITOR} -- "$@"
mime ^text, label pager = "$PAGER" -- "$@"
!mime ^text, label editor, ext xml|json|csv|tex|py|pl|rb|js|sh|php = ${VISUAL:-$EDITOR} -- "$@"
!mime ^text, label pager, ext xml|json|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@"
ext 1 = man "$1"
ext s[wmf]c, has zsnes, X = zsnes "$1"
ext s[wmf]c, has snes9x-gtk,X = snes9x-gtk "$1"
ext nes, has fceux, X = fceux "$1"
ext exe = wine "$1"
name ^[mM]akefile$ = make
#--------------------------------------------
# Scripts
#-------------------------------------------
ext py = python -- "$1"
ext pl = perl -- "$1"
ext rb = ruby -- "$1"
ext js = node -- "$1"
ext sh = sh -- "$1"
ext php = php -- "$1"
#--------------------------------------------
# Audio without X
#-------------------------------------------
mime ^audio|ogg$, terminal, has mpv = mpv -- "$@"
mime ^audio|ogg$, terminal, has mplayer2 = mplayer2 -- "$@"
mime ^audio|ogg$, terminal, has mplayer = mplayer -- "$@"
ext midi?, terminal, has wildmidi = wildmidi -- "$@"
#--------------------------------------------
# Video/Audio with a GUI
#-------------------------------------------
mime ^video|audio, has gmplayer, X, flag f = gmplayer -- "$@"
mime ^video|audio, has smplayer, X, flag f = smplayer "$@"
mime ^video, has mpv, X, flag f = mpv -- "$@"
mime ^video, has mpv, X, flag f = mpv --fs -- "$@"
mime ^video, has mplayer2, X, flag f = mplayer2 -- "$@"
mime ^video, has mplayer2, X, flag f = mplayer2 -fs -- "$@"
mime ^video, has mplayer, X, flag f = mplayer -- "$@"
mime ^video, has mplayer, X, flag f = mplayer -fs -- "$@"
mime ^video|audio, has vlc, X, flag f = vlc -- "$@"
mime ^video|audio, has totem, X, flag f = totem -- "$@"
mime ^video|audio, has totem, X, flag f = totem --fullscreen -- "$@"
#--------------------------------------------
# Video without X
#-------------------------------------------
mime ^video, terminal, !X, has mpv = mpv -- "$@"
mime ^video, terminal, !X, has mplayer2 = mplayer2 -- "$@"
mime ^video, terminal, !X, has mplayer = mplayer -- "$@"
#-------------------------------------------
# Documents
#-------------------------------------------
ext pdf, has llpp, X, flag f = llpp "$@"
ext pdf, has zathura, X, flag f = zathura -- "$@"
ext pdf, has mupdf, X, flag f = mupdf "$@"
ext pdf, has mupdf-x11,X, flag f = mupdf-x11 "$@"
ext pdf, has apvlv, X, flag f = apvlv -- "$@"
ext pdf, has xpdf, X, flag f = xpdf -- "$@"
ext pdf, has evince, X, flag f = evince -- "$@"
ext pdf, has atril, X, flag f = atril -- "$@"
ext pdf, has okular, X, flag f = okular -- "$@"
ext pdf, has epdfview, X, flag f = epdfview -- "$@"
ext pdf, has qpdfview, X, flag f = qpdfview "$@"
ext pdf, has open, X, flag f = open "$@"
ext docx?, has catdoc, terminal = catdoc -- "$@" | "$PAGER"
ext sxc|xlsx?|xlt|xlw|gnm|gnumeric, has gnumeric, X, flag f = gnumeric -- "$@"
ext sxc|xlsx?|xlt|xlw|gnm|gnumeric, has kspread, X, flag f = kspread -- "$@"
ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has libreoffice, X, flag f = libreoffice "$@"
ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has soffice, X, flag f = soffice "$@"
ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has ooffice, X, flag f = ooffice "$@"
ext djvu, has zathura,X, flag f = zathura -- "$@"
ext djvu, has evince, X, flag f = evince -- "$@"
ext djvu, has atril, X, flag f = atril -- "$@"
ext djvu, has djview, X, flag f = djview -- "$@"
ext epub, has ebook-viewer, X, flag f = ebook-viewer -- "$@"
ext epub, has zathura, X, flag f = zathura -- "$@"
ext epub, has mupdf, X, flag f = mupdf -- "$@"
ext mobi, has ebook-viewer, X, flag f = ebook-viewer -- "$@"
ext cbr, has zathura, X, flag f = zathura -- "$@"
ext cbz, has zathura, X, flag f = zathura -- "$@"
#-------------------------------------------
# Images
#-------------------------------------------
mime ^image/svg, has inkscape, X, flag f = inkscape -- "$@"
mime ^image/svg, has display, X, flag f = display -- "$@"
mime ^image, has imv, X, flag f = imv -- "$@"
mime ^image, has pqiv, X, flag f = pqiv -- "$@"
mime ^image, has sxiv, X, flag f = sxiv -- "$@"
mime ^image, has feh, X, flag f = feh -- "$@"
mime ^image, has mirage, X, flag f = mirage -- "$@"
mime ^image, has ristretto, X, flag f = ristretto "$@"
mime ^image, has eog, X, flag f = eog -- "$@"
mime ^image, has eom, X, flag f = eom -- "$@"
mime ^image, has nomacs, X, flag f = nomacs -- "$@"
mime ^image, has geeqie, X, flag f = geeqie -- "$@"
mime ^image, has gpicview, X, flag f = gpicview -- "$@"
mime ^image, has gwenview, X, flag f = gwenview -- "$@"
mime ^image, has gimp, X, flag f = gimp -- "$@"
ext xcf, X, flag f = gimp -- "$@"
#-------------------------------------------
# Archives
#-------------------------------------------
# avoid password prompt by providing empty password
ext 7z, has 7z = 7z -p l "$@" | "$PAGER"
# This requires atool
ext ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz, has atool = atool --list --each -- "$@" | "$PAGER"
ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --list --each -- "$@" | "$PAGER"
ext 7z|ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz, has atool = atool --extract --each -- "$@"
ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --extract --each -- "$@"
# Listing and extracting archives without atool:
ext tar|gz|bz2|xz, has tar = tar vvtf "$1" | "$PAGER"
ext tar|gz|bz2|xz, has tar = for file in "$@"; do tar vvxf "$file"; done
ext bz2, has bzip2 = for file in "$@"; do bzip2 -dk "$file"; done
ext zip, has unzip = unzip -l "$1" | less
ext zip, has unzip = for file in "$@"; do unzip -d "${file%.*}" "$file"; done
ext ace, has unace = unace l "$1" | less
ext ace, has unace = for file in "$@"; do unace e "$file"; done
ext rar, has unrar = unrar l "$1" | less
ext rar, has unrar = for file in "$@"; do unrar x "$file"; done
#-------------------------------------------
# Fonts
#-------------------------------------------
mime ^font, has fontforge, X, flag f = fontforge "$@"
#-------------------------------------------
# Flag t fallback terminals
#-------------------------------------------
# Rarely installed terminal emulators get higher priority; It is assumed that
# if you install a rare terminal emulator, you probably use it.
# gnome-terminal/konsole/xterm on the other hand are often installed as part of
# a desktop environment or as fallback terminal emulators.
mime ^ranger/x-terminal-emulator, has terminology = terminology -e "$@"
mime ^ranger/x-terminal-emulator, has kitty = kitty -- "$@"
mime ^ranger/x-terminal-emulator, has alacritty = alacritty -e "$@"
mime ^ranger/x-terminal-emulator, has sakura = sakura -e "$@"
mime ^ranger/x-terminal-emulator, has lilyterm = lilyterm -e "$@"
#mime ^ranger/x-terminal-emulator, has cool-retro-term = cool-retro-term -e "$@"
mime ^ranger/x-terminal-emulator, has termite = termite -x '"$@"'
#mime ^ranger/x-terminal-emulator, has yakuake = yakuake -e "$@"
mime ^ranger/x-terminal-emulator, has guake = guake -ne "$@"
mime ^ranger/x-terminal-emulator, has tilda = tilda -c "$@"
mime ^ranger/x-terminal-emulator, has st = st -e "$@"
mime ^ranger/x-terminal-emulator, has terminator = terminator -x "$@"
mime ^ranger/x-terminal-emulator, has urxvt = urxvt -e "$@"
mime ^ranger/x-terminal-emulator, has pantheon-terminal = pantheon-terminal -e "$@"
mime ^ranger/x-terminal-emulator, has lxterminal = lxterminal -e "$@"
mime ^ranger/x-terminal-emulator, has mate-terminal = mate-terminal -x "$@"
mime ^ranger/x-terminal-emulator, has xfce4-terminal = xfce4-terminal -x "$@"
mime ^ranger/x-terminal-emulator, has konsole = konsole -e "$@"
mime ^ranger/x-terminal-emulator, has gnome-terminal = gnome-terminal -- "$@"
mime ^ranger/x-terminal-emulator, has xterm = xterm -e "$@"
#-------------------------------------------
# Misc
#-------------------------------------------
label wallpaper, number 11, mime ^image, has feh, X = feh --bg-scale "$1"
label wallpaper, number 12, mime ^image, has feh, X = feh --bg-tile "$1"
label wallpaper, number 13, mime ^image, has feh, X = feh --bg-center "$1"
label wallpaper, number 14, mime ^image, has feh, X = feh --bg-fill "$1"
#-------------------------------------------
# Generic file openers
#-------------------------------------------
label open, has xdg-open = xdg-open -- "$@"
label open, has open = open -- "$@"
# Define the editor for non-text files + pager as last action
!mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = ask
label editor, !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = ${VISUAL:-$EDITOR} -- "$@"
label pager, !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@"
######################################################################
# The actions below are left so low down in this file on purpose, so #
# they are never triggered accidentally. #
######################################################################
# Execute a file as program/script.
mime application/x-executable = "$1"
# Move the file to trash using trash-cli.
label trash, has trash-put = trash-put -- "$@"
label trash = mkdir -p -- ${XDG_DATA_DIR:-$HOME/.ranger}/ranger-trash; mv -- "$@" ${XDG_DATA_DIR:-$HOME/.ranger}/ranger-trash

350
ranger/scope.sh
View File

@ -1,350 +0,0 @@
#!/usr/bin/env bash
set -o noclobber -o noglob -o nounset -o pipefail
IFS=$'\n'
## If the option `use_preview_script` is set to `true`,
## then this script will be called and its output will be displayed in ranger.
## ANSI color codes are supported.
## STDIN is disabled, so interactive scripts won't work properly
## This script is considered a configuration file and must be updated manually.
## It will be left untouched if you upgrade ranger.
## Because of some automated testing we do on the script #'s for comments need
## to be doubled up. Code that is commented out, because it's an alternative for
## example, gets only one #.
## Meanings of exit codes:
## code | meaning | action of ranger
## -----+------------+-------------------------------------------
## 0 | success | Display stdout as preview
## 1 | no preview | Display no preview at all
## 2 | plain text | Display the plain content of the file
## 3 | fix width | Don't reload when width changes
## 4 | fix height | Don't reload when height changes
## 5 | fix both | Don't ever reload
## 6 | image | Display the image `$IMAGE_CACHE_PATH` points to as an image preview
## 7 | image | Display the file directly as an image
## Script arguments
FILE_PATH="${1}" # Full path of the highlighted file
PV_WIDTH="${2}" # Width of the preview pane (number of fitting characters)
## shellcheck disable=SC2034 # PV_HEIGHT is provided for convenience and unused
PV_HEIGHT="${3}" # Height of the preview pane (number of fitting characters)
IMAGE_CACHE_PATH="${4}" # Full path that should be used to cache image preview
PV_IMAGE_ENABLED="${5}" # 'True' if image previews are enabled, 'False' otherwise.
FILE_EXTENSION="${FILE_PATH##*.}"
FILE_EXTENSION_LOWER="$(printf "%s" "${FILE_EXTENSION}" | tr '[:upper:]' '[:lower:]')"
## Settings
HIGHLIGHT_SIZE_MAX=262143 # 256KiB
HIGHLIGHT_TABWIDTH=${HIGHLIGHT_TABWIDTH:-8}
HIGHLIGHT_STYLE=${HIGHLIGHT_STYLE:-pablo}
HIGHLIGHT_OPTIONS="--replace-tabs=${HIGHLIGHT_TABWIDTH} --style=${HIGHLIGHT_STYLE} ${HIGHLIGHT_OPTIONS:-}"
PYGMENTIZE_STYLE=${PYGMENTIZE_STYLE:-autumn}
OPENSCAD_IMGSIZE=${RNGR_OPENSCAD_IMGSIZE:-1000,1000}
OPENSCAD_COLORSCHEME=${RNGR_OPENSCAD_COLORSCHEME:-Tomorrow Night}
handle_extension() {
case "${FILE_EXTENSION_LOWER}" in
## Archive
a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
atool --list -- "${FILE_PATH}" && exit 5
bsdtar --list --file "${FILE_PATH}" && exit 5
exit 1;;
rar)
## Avoid password prompt by providing empty password
unrar lt -p- -- "${FILE_PATH}" && exit 5
exit 1;;
7z)
## Avoid password prompt by providing empty password
7z l -p -- "${FILE_PATH}" && exit 5
exit 1;;
## PDF
pdf)
## Preview as text conversion
pdftotext -l 10 -nopgbrk -q -- "${FILE_PATH}" - | \
fmt -w "${PV_WIDTH}" && exit 5
mutool draw -F txt -i -- "${FILE_PATH}" 1-10 | \
fmt -w "${PV_WIDTH}" && exit 5
exiftool "${FILE_PATH}" && exit 5
exit 1;;
## BitTorrent
torrent)
transmission-show -- "${FILE_PATH}" && exit 5
exit 1;;
## OpenDocument
odt|ods|odp|sxw)
## Preview as text conversion
odt2txt "${FILE_PATH}" && exit 5
## Preview as markdown conversion
pandoc -s -t markdown -- "${FILE_PATH}" && exit 5
exit 1;;
## XLSX
xlsx)
## Preview as csv conversion
## Uses: https://github.com/dilshod/xlsx2csv
xlsx2csv -- "${FILE_PATH}" && exit 5
exit 1;;
## HTML
htm|html|xhtml)
## Preview as text conversion
w3m -dump "${FILE_PATH}" && exit 5
lynx -dump -- "${FILE_PATH}" && exit 5
elinks -dump "${FILE_PATH}" && exit 5
pandoc -s -t markdown -- "${FILE_PATH}" && exit 5
;;
## JSON
json)
jq --color-output . "${FILE_PATH}" && exit 5
python -m json.tool -- "${FILE_PATH}" && exit 5
;;
## Direct Stream Digital/Transfer (DSDIFF) and wavpack aren't detected
## by file(1).
dff|dsf|wv|wvc)
mediainfo "${FILE_PATH}" && exit 5
exiftool "${FILE_PATH}" && exit 5
;; # Continue with next handler on failure
esac
}
handle_image() {
## Size of the preview if there are multiple options or it has to be
## rendered from vector graphics. If the conversion program allows
## specifying only one dimension while keeping the aspect ratio, the width
## will be used.
local DEFAULT_SIZE="1920x1080"
local mimetype="${1}"
case "${mimetype}" in
## SVG
image/svg+xml|image/svg)
convert -- "${FILE_PATH}" "${IMAGE_CACHE_PATH}" && exit 6
exit 1;;
## DjVu
# image/vnd.djvu)
# ddjvu -format=tiff -quality=90 -page=1 -size="${DEFAULT_SIZE}" \
# - "${IMAGE_CACHE_PATH}" < "${FILE_PATH}" \
# && exit 6 || exit 1;;
## Image
image/*)
local orientation
orientation="$( identify -format '%[EXIF:Orientation]\n' -- "${FILE_PATH}" )"
## If orientation data is present and the image actually
## needs rotating ("1" means no rotation)...
if [[ -n "$orientation" && "$orientation" != 1 ]]; then
## ...auto-rotate the image according to the EXIF data.
convert -- "${FILE_PATH}" -auto-orient "${IMAGE_CACHE_PATH}" && exit 6
fi
## `w3mimgdisplay` will be called for all images (unless overriden
## as above), but might fail for unsupported types.
exit 7;;
## Video
# video/*)
# # Thumbnail
# ffmpegthumbnailer -i "${FILE_PATH}" -o "${IMAGE_CACHE_PATH}" -s 0 && exit 6
# exit 1;;
## PDF
# application/pdf)
# pdftoppm -f 1 -l 1 \
# -scale-to-x "${DEFAULT_SIZE%x*}" \
# -scale-to-y -1 \
# -singlefile \
# -jpeg -tiffcompression jpeg \
# -- "${FILE_PATH}" "${IMAGE_CACHE_PATH%.*}" \
# && exit 6 || exit 1;;
## ePub, MOBI, FB2 (using Calibre)
# application/epub+zip|application/x-mobipocket-ebook|\
# application/x-fictionbook+xml)
# # ePub (using https://github.com/marianosimone/epub-thumbnailer)
# epub-thumbnailer "${FILE_PATH}" "${IMAGE_CACHE_PATH}" \
# "${DEFAULT_SIZE%x*}" && exit 6
# ebook-meta --get-cover="${IMAGE_CACHE_PATH}" -- "${FILE_PATH}" \
# >/dev/null && exit 6
# exit 1;;
## Font
application/font*|application/*opentype)
preview_png="/tmp/$(basename "${IMAGE_CACHE_PATH%.*}").png"
if fontimage -o "${preview_png}" \
--pixelsize "120" \
--fontname \
--pixelsize "80" \
--text " ABCDEFGHIJKLMNOPQRSTUVWXYZ " \
--text " abcdefghijklmnopqrstuvwxyz " \
--text " 0123456789.:,;(*!?') ff fl fi ffi ffl " \
--text " The quick brown fox jumps over the lazy dog. " \
"${FILE_PATH}";
then
convert -- "${preview_png}" "${IMAGE_CACHE_PATH}" \
&& rm "${preview_png}" \
&& exit 6
else
exit 1
fi
;;
## Preview archives using the first image inside.
## (Very useful for comic book collections for example.)
# application/zip|application/x-rar|application/x-7z-compressed|\
# application/x-xz|application/x-bzip2|application/x-gzip|application/x-tar)
# local fn=""; local fe=""
# local zip=""; local rar=""; local tar=""; local bsd=""
# case "${mimetype}" in
# application/zip) zip=1 ;;
# application/x-rar) rar=1 ;;
# application/x-7z-compressed) ;;
# *) tar=1 ;;
# esac
# { [ "$tar" ] && fn=$(tar --list --file "${FILE_PATH}"); } || \
# { fn=$(bsdtar --list --file "${FILE_PATH}") && bsd=1 && tar=""; } || \
# { [ "$rar" ] && fn=$(unrar lb -p- -- "${FILE_PATH}"); } || \
# { [ "$zip" ] && fn=$(zipinfo -1 -- "${FILE_PATH}"); } || return
#
# fn=$(echo "$fn" | python -c "import sys; import mimetypes as m; \
# [ print(l, end='') for l in sys.stdin if \
# (m.guess_type(l[:-1])[0] or '').startswith('image/') ]" |\
# sort -V | head -n 1)
# [ "$fn" = "" ] && return
# [ "$bsd" ] && fn=$(printf '%b' "$fn")
#
# [ "$tar" ] && tar --extract --to-stdout \
# --file "${FILE_PATH}" -- "$fn" > "${IMAGE_CACHE_PATH}" && exit 6
# fe=$(echo -n "$fn" | sed 's/[][*?\]/\\\0/g')
# [ "$bsd" ] && bsdtar --extract --to-stdout \
# --file "${FILE_PATH}" -- "$fe" > "${IMAGE_CACHE_PATH}" && exit 6
# [ "$bsd" ] || [ "$tar" ] && rm -- "${IMAGE_CACHE_PATH}"
# [ "$rar" ] && unrar p -p- -inul -- "${FILE_PATH}" "$fn" > \
# "${IMAGE_CACHE_PATH}" && exit 6
# [ "$zip" ] && unzip -pP "" -- "${FILE_PATH}" "$fe" > \
# "${IMAGE_CACHE_PATH}" && exit 6
# [ "$rar" ] || [ "$zip" ] && rm -- "${IMAGE_CACHE_PATH}"
# ;;
esac
# openscad_image() {
# TMPPNG="$(mktemp -t XXXXXX.png)"
# openscad --colorscheme="${OPENSCAD_COLORSCHEME}" \
# --imgsize="${OPENSCAD_IMGSIZE/x/,}" \
# -o "${TMPPNG}" "${1}"
# mv "${TMPPNG}" "${IMAGE_CACHE_PATH}"
# }
# case "${FILE_EXTENSION_LOWER}" in
# ## 3D models
# ## OpenSCAD only supports png image output, and ${IMAGE_CACHE_PATH}
# ## is hardcoded as jpeg. So we make a tempfile.png and just
# ## move/rename it to jpg. This works because image libraries are
# ## smart enough to handle it.
# csg|scad)
# openscad_image "${FILE_PATH}" && exit 6
# ;;
# 3mf|amf|dxf|off|stl)
# openscad_image <(echo "import(\"${FILE_PATH}\");") && exit 6
# ;;
# esac
}
handle_mime() {
local mimetype="${1}"
case "${mimetype}" in
## RTF and DOC
text/rtf|*msword)
## Preview as text conversion
## note: catdoc does not always work for .doc files
## catdoc: http://www.wagner.pp.ru/~vitus/software/catdoc/
catdoc -- "${FILE_PATH}" && exit 5
exit 1;;
## DOCX, ePub, FB2 (using markdown)
## You might want to remove "|epub" and/or "|fb2" below if you have
## uncommented other methods to preview those formats
*wordprocessingml.document|*/epub+zip|*/x-fictionbook+xml)
## Preview as markdown conversion
pandoc -s -t markdown -- "${FILE_PATH}" && exit 5
exit 1;;
## XLS
*ms-excel)
## Preview as csv conversion
## xls2csv comes with catdoc:
## http://www.wagner.pp.ru/~vitus/software/catdoc/
xls2csv -- "${FILE_PATH}" && exit 5
exit 1;;
## Text
text/* | */xml)
## Syntax highlight
if [[ "$( stat --printf='%s' -- "${FILE_PATH}" )" -gt "${HIGHLIGHT_SIZE_MAX}" ]]; then
exit 2
fi
if [[ "$( tput colors )" -ge 256 ]]; then
local pygmentize_format='terminal256'
local highlight_format='xterm256'
else
local pygmentize_format='terminal'
local highlight_format='ansi'
fi
env HIGHLIGHT_OPTIONS="${HIGHLIGHT_OPTIONS}" highlight \
--out-format="${highlight_format}" \
--force -- "${FILE_PATH}" && exit 5
env COLORTERM=8bit bat --color=always --style="plain" \
-- "${FILE_PATH}" && exit 5
pygmentize -f "${pygmentize_format}" -O "style=${PYGMENTIZE_STYLE}"\
-- "${FILE_PATH}" && exit 5
exit 2;;
## DjVu
image/vnd.djvu)
## Preview as text conversion (requires djvulibre)
djvutxt "${FILE_PATH}" | fmt -w "${PV_WIDTH}" && exit 5
exiftool "${FILE_PATH}" && exit 5
exit 1;;
## Image
image/*)
## Preview as text conversion
# img2txt --gamma=0.6 --width="${PV_WIDTH}" -- "${FILE_PATH}" && exit 4
exiftool "${FILE_PATH}" && exit 5
exit 1;;
## Video and audio
video/* | audio/*)
mediainfo "${FILE_PATH}" && exit 5
exiftool "${FILE_PATH}" && exit 5
exit 1;;
esac
}
handle_fallback() {
echo '----- File Type Classification -----' && file --dereference --brief -- "${FILE_PATH}" && exit 5
exit 1
}
MIMETYPE="$( file --dereference --brief --mime-type -- "${FILE_PATH}" )"
if [[ "${PV_IMAGE_ENABLED}" == 'True' ]]; then
handle_image "${MIMETYPE}"
fi
handle_extension
handle_mime "${MIMETYPE}"
handle_fallback
exit 1

BIN
screenshot.png
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 1.7 MiB

After

Width:  |  Height:  |  Size: 3.7 MiB

15
sway/config
View File

@ -3,7 +3,7 @@ input * {
xkb_layout "gb"
}
input "1739:32402:DELL0767:00_06CB:7E92_Touchpad" {
input "type:touchpad" {
dwt enabled
tap enabled
}
@ -72,7 +72,7 @@ for_window [title="Firefox — Sharing Indicator"] floating enable
for_window [title="Open Files"] floating enable
# A/V
for_window [app_id=zoom] floating enable
for_window [class=zoom] floating enable
for_window [app_id=pavucontrol] floating enable
for_window [app_id=io.github.celluloid_player.Celluloid] floating enable
@ -84,7 +84,7 @@ for_window [app_id=gedit] floating enable
for_window [title="Customise Look and Feel"] floating enable
# Everything else
for_window [app_id=".*"] border pixel 3
for_window [app_id=".*"] border pixel 1
### Key bindings
#
@ -255,8 +255,9 @@ bar {
#
# gaps
#
gaps inner 10
gaps outer 10
gaps top -10
gaps bottom -10
smart_gaps off
smart_borders on
@ -264,8 +265,8 @@ smart_borders on
# Titlebars
#
font pango:KanitMedium 9
default_border pixel 3
default_floating_border none
default_border pixel 1
default_floating_border pixel 1
hide_edge_borders none
titlebar_border_thickness 0
@ -273,7 +274,7 @@ titlebar_border_thickness 0
# Colors & background
#
include ~/.cache/wal/colors-sway
output "*" background /home/nick/Pictures/Wallpapers/gruvbox_photo-1517999179346-a7078f1e40a6.jpeg fill
output "*" background /home/nick/Pictures/Wallpapers/photo-1517999179346-a7078f1e40a6.jpeg fill
#output "*" background $wallpaper fill
# class border backgr. text indicator child_border

6
wal/templates/colors-cava
View File

@ -123,9 +123,9 @@
# You can define as many as 8 different colors. They range from bottom to top of screen
gradient = 1
gradient_count = 3
gradient_color_1 = '{color2}'
gradient_color_2 = '{color3}'
gradient_color_3 = '{color1}'
gradient_color_1 = '{color4}'
gradient_color_2 = '{color6}'
gradient_color_3 = '{color2}'

BIN
wallpaper.jpeg Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.2 MiB

BIN
wallpaper.jpg
View File

Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 258 KiB

478
waybar/config
View File

@ -1,227 +1,273 @@
// -*- mode: json -*-
//[
//{
// "position": "bottom",
// "layer": "bottom",
// "margin-left": 5,
// "margin-right": 5,
// "margin-bottom": 5,
// "modules-left": ["sway/mode", "wlr/taskbar"],
// "modules-right": ["tray"],
//},
{
"position": "top",
"layer": "bottom",
"margin-top": 5,
"margin-right": 10,
"margin-left": 10,
"modules-center": [
"sway/workspaces",
],
"modules-left": [
"clock",
"custom/separator",
"battery",
"custom/separator",
"disk#1",
"disk#2",
"custom/separator",
"memory",
"custom/swap",
"custom/separator",
"cpu",
"custom/separator",
"idle_inhibitor",
],
"modules-right": [
"custom/covid",
"custom/separator",
"custom/weather",
"custom/separator",
"custom/updates",
"custom/auroch",
"custom/separator",
"backlight",
"custom/separator",
"pulseaudio",
"custom/separator",
"tray",
"custom/separator",
"custom/powermenu",
],
"sway/workspaces": {
"disable-scroll": true,
"all-outputs": true,
"format": "{name} {icon}",
"format-icons": {
"1": "",
"2": "",
"3": "",
"4": "",
"urgent": "",
"focused": "",
"default": ""
[
{
"position": "bottom",
"layer": "bottom",
"margin-left": 10,
"margin-right": 10,
"margin-bottom": 10,
"modules-left": [
"sway/mode",
"wlr/taskbar"
],
"modules-right": [
"custom/gpuuse",
"custom/gputemp",
"custom/separator",
"custom/weather",
"custom/separator",
"tray"
],
"sway/mode": {
"format": "{}"
},
"wlr/taskbar": {
"all-outputs": false,
"format": "{icon} {title:.15}",
"icon-theme": "Tela-circle-grey-dark",
"icon-size": 14,
"on-click": "activate",
"on-middle-click": "close",
"on-right-click": "minimize"
},
"tray": {
"icon-size": 12,
"spacing": 10
},
"custom/separator": {
"format": "|",
"tooltip": false
},
"custom/weather": {
"format": "{}",
"exec": "~/.config/waybar/modules/weather.sh",
"interval": 3600
},
"custom/gputemp": {
"interval": 2,
"return-type": "json",
"format": "{icon} {}",
"format-icons": [
"",
"",
"",
"",
""
],
"exec": "~/.config/waybar/modules/gpu/temp"
},
"custom/gpuuse": {
"interval": 2,
"return-type": "json",
"format": " {}%",
"exec": "~/.config/waybar/modules/gpu/usage"
}
},
"idle_inhibitor": {
"format": "{icon}",
"format-icons": {
"activated": "",
"deactivated": ""
}
},
"backlight": {
"format": " {percent}%",
"format-icons": ["", "", ""],
"on-scroll-up": "brightnessctl set +5%",
"on-scroll-down": "brightnessctl set 5%-"
},
"clock": {
"format": "{:%a %d %b %H:%M}",
"tooltip": false
},
"pulseaudio": {
"format": "{icon} {volume}% {format_source}",
"format-bluetooth": "{icon} {volume}% {format_source}",
"format-bluetooth-muted": " {icon} {format_source}",
"format-muted": " {format_source}",
"format-source": " {volume}%",
"format-source-muted": "",
"format-icons": {
"headphone": "",
"hands-free": "",
"headset": "",
"phone": "",
"portable": "",
"car": "",
"default": [
"",
"",
""
{
"position": "top",
"layer": "bottom",
"margin-top": 10,
"margin-right": 10,
"margin-left": 10,
"modules-center": [
"sway/workspaces"
],
"modules-left": [
"clock",
"custom/separator",
"battery",
"custom/separator",
"disk#1",
"disk#2",
"custom/separator",
"memory",
"cpu",
"custom/cputemp"
],
"modules-right": [
"idle_inhibitor",
"custom/separator",
"custom/covid",
"custom/separator",
"custom/updates",
"custom/auroch",
"custom/separator",
"backlight",
"custom/separator",
"pulseaudio",
"custom/separator",
"custom/powermenu"
],
"sway/workspaces": {
"disable-scroll": true,
"all-outputs": true,
"format": "{name} {icon}",
"format-icons": {
"1": "",
"2": "",
"3": "",
"4": "",
"urgent": "",
"focused": "",
"default": ""
}
},
"idle_inhibitor": {
"format": "{icon}",
"format-icons": {
"activated": "",
"deactivated": ""
}
},
"backlight": {
"format": " {percent}%",
"format-icons": [
"",
""
],
"on-scroll-up": "brightnessctl set +5%",
"on-scroll-down": "brightnessctl set 5%-"
},
"clock": {
"format": "{:%a %d %b %H:%M}",
"tooltip": false
},
"pulseaudio": {
"format": "{icon} {volume}% {format_source}",
"format-bluetooth": "{icon} {volume}% {format_source}",
"format-bluetooth-muted": " {icon} {format_source}",
"format-muted": " {format_source}",
"format-source": " {volume}%",
"format-source-muted": "",
"format-icons": {
"headphone": "",
"hands-free": "",
"headset": "",
"phone": "",
"portable": "",
"car": "",
"default": [
"",
"",
""
]
},
"on-click": "pavucontrol"
},
"memory": {
"states": {
"good": 0,
"warning": 60,
"critical": 80
},
"interval": 5,
"format": " {}%"
},
"cpu": {
"states": {
"good": 0,
"warning": 70,
"critical": 95
},
"interval": 1,
"format": " {usage:2}%"
},
"battery": {
"states": {
"good": 100,
"warning": 30,
"critical": 15
},
"format": "{icon} {capacity}%",
"format-icons": [
"",
"",
"",
"",
""
]
},
"on-click": "pavucontrol"
},
"memory": {
"states": {
"good": 0,
"warning": 60,
"critical": 80
"disk#1": {
"states": {
"good": 0,
"warning": 70,
"critical": 95
},
"interval": 5,
"format": " {percentage_used:2}%",
"path": "/"
},
"interval": 5,
"format": " {}%"
},
"cpu": {
"states": {
"good": 0,
"warning": 70,
"critical": 95
"disk#2": {
"states": {
"good": 0,
"warning": 70,
"critical": 95
},
"interval": 5,
"format": " {percentage_used:2}%",
"path": "/home"
},
"interval": 1,
"format": " {usage:2}%"
},
"battery": {
"states": {
"good": 100,
"warning": 30,
"critical": 15
"custom/updates": {
"format": " {}",
"return-type": "json",
"interval": 5,
"exec": "cat ~/tmp/updates.json",
"exec-if": "file ~/tmp/updates.json",
"on-click": "kitty ~/.config/waybar/modules/updates/updates.sh; systemctl --user start updates.service",
"tooltip": true
},
"format": "{icon} {capacity}%",
"format-icons": [
"",
"",
"",
"",
""
]
},
"disk#1": {
"states": {
"good": 0,
"warning": 70,
"critical": 95
"custom/auroch": {
"format": " {}",
"return-type": "json",
"exec": "cat ~/tmp/auroch.json",
"exec-if": "file ~/tmp/auroch.json",
"on-click": "systemctl --user start auroch.service",
"interval": 5,
"tooltip": true
},
"interval": 5,
"format": " {percentage_used:2}%",
"path": "/"
},
"disk#2": {
"states": {
"good": 0,
"warning": 70,
"critical": 95
"custom/swap": {
"format": " {}",
"interval": 5,
"exec": "free -h | grep Swap | awk '{print $3}'"
},
"interval": 5,
"format": " {percentage_used:2}%",
"path": "/home"
},
"wlr/taskbar": {
"all-outputs": false,
"format": "{icon}",
"icon-theme": "oomox-walmat",
"icon-size": 16,
"on-click": "activate",
"on-middle-click": "close",
"on-right-click": "minimize"
},
"sway/mode": {
"format": "{}",
"rotate": 90
},
"tray": {
"icon-size": 12,
"spacing": 10
},
"custom/updates": {
"format": " {}",
"return-type": "json",
"interval": 5,
"exec": "cat ~/tmp/updates.json",
"exec-if": "file ~/tmp/updates.json",
"on-click": "alacritty --class aptus-upgrade -e ~/.config/waybar/modules/updates/updates.sh; systemctl --user start updates.service",
"tooltip": true
},
"custom/auroch": {
"format": " {}",
"return-type": "json",
"exec": "cat ~/tmp/auroch.json",
"exec-if": "file ~/tmp/auroch.json",
"on-click": "systemctl --user start auroch.service",
"interval": 5,
"tooltip": true
},
"custom/swap": {
"format": " {}",
"interval": 5,
"exec": "free -h | grep Swap | awk '{print $3}'"
},
"custom/separator": {
"format": "",
"tooltip": false
},
"custom/powermenu": {
"format": "",
"on-click": "nwgbar",
"tooltip": false
},
"custom/weather": {
"format": "{}",
"exec": "~/.config/waybar/modules/weather.sh",
"interval": 3600
},
"custom/spotify": {
"interval": 1,
"return-type": "json",
"exec": "~/.config/waybar/modules/spotify.sh",
"exec-if": "pgrep spotify",
"escape": true
},
"custom/covid": {
"interval": 3600,
"exec": "~/.config/waybar/modules/covid/covid-checker ltla E07000012",
"return-type": "json",
"format": "{icon} {}",
"format-icons": ["", ""]
"custom/cputemp": {
"interval": 2,
"return-type": "json",
"format": "{icon} {}",
"format-icons": [
"",
"",
"",
"",
""
],
"exec": "~/.config/waybar/modules/cputemp"
},
"custom/separator": {
"format": "|",
"tooltip": false
},
"custom/powermenu": {
"format": "",
"on-click": "nwgbar",
"tooltip": false
},
"custom/spotify": {
"interval": 1,
"return-type": "json",
"exec": "~/.config/waybar/modules/spotify.sh",
"exec-if": "pgrep spotify",
"escape": true
},
"custom/covid": {
"interval": 3600,
"exec": "~/.config/waybar/modules/covid/covid-checker ltla E07000012",
"return-type": "json",
"format": "{icon} {}",
"format-icons": [
"",
""
]
}
}
}
//]
]

13
waybar/modules/cputemp Executable file
View File

@ -0,0 +1,13 @@
#!/bin/bash
temp=$(sensors -A dell_smm-virtual-0 | grep CPU | awk '{print $2}' | sed -e 's/+//' -e 's/\.0//')
class="normal"
pct=$(echo $temp | sed -e 's/°C//')
if [[ $pct -gt 79 ]]; then
class="warning"
elif [[ $pct -gt 99 ]]; then
class="critical"
fi
echo "{\"text\": \"$temp\", \"class\": \"$class\", \"percentage\": $pct }"

5
waybar/modules/gpu/go.mod Normal file
View File

@ -0,0 +1,5 @@
module github.com/nboughton/dotfiles/waybar/modules/gpu
go 1.16
require github.com/nboughton/dotfiles/waybar/modules/gobar v0.0.0-20210630170952-c37985e73c9e

6
waybar/modules/gpu/go.sum Normal file
View File

@ -0,0 +1,6 @@
github.com/esiqveland/notify v0.9.1 h1:hX6ZD3FCQJXI46AzUM/iWekcMfnZ9TPE4uIu9Hrn1D4=
github.com/esiqveland/notify v0.9.1/go.mod h1:63UbVSaeJwF0LVJARHFuPgUAoM7o1BEvCZyknsuonBc=
github.com/godbus/dbus/v5 v5.0.3 h1:ZqHaoEF7TBzh4jzPmqVhE/5A1z9of6orkAe5uHoAeME=
github.com/godbus/dbus/v5 v5.0.3/go.mod h1:xhWf0FNVPg57R7Z0UbKHbJfkEywrmjJnf7w5xrFpKfA=
github.com/nboughton/dotfiles/waybar/modules/gobar v0.0.0-20210630170952-c37985e73c9e h1:luTBXTlINHH6z2oLAP33lqf91UK+8DAqkk/BjbhWmrg=
github.com/nboughton/dotfiles/waybar/modules/gobar v0.0.0-20210630170952-c37985e73c9e/go.mod h1:9MC4JW6muedO0QtIPqhZLM01B7ZjUGD6mDjdePRA1M0=

79
waybar/modules/gpu/main.go Normal file
View File

@ -0,0 +1,79 @@
package main
import (
"bytes"
"fmt"
"os"
"os/exec"
"regexp"
"strconv"
"strings"
"text/tabwriter"
"github.com/nboughton/dotfiles/waybar/modules/gobar"
)
func main() {
t := gobar.JSONOutput{
Class: "normal",
}
o, _ := exec.Command("sensors", "-A", "amdgpu-pci-0300").CombinedOutput()
text := strings.Replace(string(o), "+", "", -1)
t.Text = getTemp(text)
// Parse the text output into something pretty
var (
buf bytes.Buffer
tw = tabwriter.NewWriter(&buf, 2, 2, 2, ' ', 0)
)
fmt.Fprint(tw, prune(text))
tw.Flush()
t.Tooltip = buf.String()
t.Percentage = getPct(t.Text)
if t.Percentage >= 90 {
t.Class = "critical"
}
if t.Percentage >= 60 {
t.Class = "warning"
}
t.Write(os.Stdout)
}
func getTemp(s string) string {
for _, line := range strings.Split(s, "\n") {
if strings.Contains(line, "edge") {
return strings.Replace(strings.TrimSpace(strings.Split(line, ":")[1]), ".0", "", 1)
}
}
return ""
}
func getPct(s string) int {
r := regexp.MustCompile(`(\d+)`)
i := r.FindAllString(s, 1)[0]
o, err := strconv.Atoi(i)
if err != nil {
return 0
}
return o
}
func prune(lines string) string {
out := ""
for _, line := range strings.Split(lines, "\n") {
if line != "" {
r := regexp.MustCompile(`(\s{2,})`)
l := strings.TrimSpace(line)
p := r.ReplaceAllString(l, "\t")
out += p + "\n"
}
}
return out
}

BIN
waybar/modules/gpu/temp Executable file
View File

Binary file not shown.

12
waybar/modules/gpu/usage Executable file
View File

@ -0,0 +1,12 @@
#!/bin/bash
n=$(cat /sys/class/drm/card0/device/gpu_busy_percent)
class="normal"
if [[ $n -gt 60 ]]; then
class="warning"
elif [[ $n -gt 80 ]]; then
class="critical"
fi
echo "{ \"text\": \"$(printf '%2d' $n)\", \"percentage\": $n, \"class\": \"$class\" }"

1
waybar/modules/updates/updates.sh
View File

@ -1,4 +1,5 @@
#!/bin/bash
yay --devel -Syu
flatpak update
read -rsp $'Press any key to continue...\n' -n1 key

53
waybar/style.css
View File

@ -52,6 +52,16 @@ window#waybar {
border-radius: 4px;
}
window#waybar.top {
border-bottom-left-radius: 0;
border-bottom-right-radius: 0;
}
window#waybar.bottom {
border-top-left-radius: 0;
border-top-right-radius: 0;
}
/* Base styling for modules */
#workspaces,
#mode,
@ -63,6 +73,7 @@ window#waybar {
#battery,
#backlight,
#disk,
#taskbar,
#custom-weather,
#custom-updates,
#custom-auroch,
@ -70,13 +81,17 @@ window#waybar {
#custom-separator,
#custom-powermenu,
#custom-covid,
#custom-gputemp,
#custom-gpuuse,
#custom-cputemp,
#tray {
padding: 2px 10px 0px 10px;
}
#custom-separator {
opacity: 0;
padding: 0px;
color: @color8;
padding-left: 10px;
padding-right: 10px;
}
#workspaces {
@ -97,12 +112,17 @@ window#waybar {
}
#disk.1,
#custom-gpuuse,
#custom-gputemp,
#memory {
padding-right: 5px;
}
#disk.2,
#cpu,
#custom-swap,
#custom-auroch {
#custom-auroch,
#custom-gputemp,
#custom-cputemp {
padding-left: 5px;
}
@ -111,6 +131,9 @@ window#waybar {
#cpu.warning,
#custom-updates.checking,
#custom-auroch.checking,
#custom-gputemp.warning,
#custom-gpuuse.warning,
#custom-cputemp.warning,
#disk.1.warning,
#disk.2.warning,
#memory.warning {
@ -121,6 +144,9 @@ window#waybar {
#cpu.critical,
#custom-auroch.error,
#custom-updates.error,
#custom-gputemp.critical,
#custom-gpuuse.critical,
#custom-cputemp.critical,
#disk.1.critical,
#disk.2.critical,
#memory.critical {
@ -145,3 +171,24 @@ window#waybar {
#clock {
margin-left: 3px;
}
#taskbar {
padding-left: 0;
}
#taskbar button {
padding-top: 0;
padding-bottom: 0;
margin-top: 0;
margin-bottom: 0;
border-top-left-radius: 0;
border-top-right-radius: 0;
}
#taskbar button.active {
color: @accent;
}
/* Pad the tray so the bottom bar doesn't change size when no windows are open */
#tray {
padding-top: 7px;
padding-bottom: 7px;
}