1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-06-07 17:46:10 +02:00
git/pack-write.c
Junio C Hamano e337a04de2 index-pack: --verify
Given an existing .pack file and the .idx file that describes it,
this new mode of operation reads and re-index the packfile and makes
sure the existing .idx file matches the result byte-for-byte.

All the objects in the .pack file are validated during this operation as
well.  Unlike verify-pack, which visits each object described in the .idx
file in the SHA-1 order, index-pack efficiently exploits the delta-chain
to avoid rebuilding the objects that are used as the base of deltified
objects over and over again while validating the objects, resulting in
much quicker verification of the .pack file and its .idx file.

This version however cannot verify a .pack/.idx pair with a handcrafted v2
index that uses 64-bit offset representation for offsets that would fit
within 31-bit. You can create such an .idx file by giving a custom offset
to --index-version option to the command.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-27 23:29:03 -08:00

294 lines
8.2 KiB
C

#include "cache.h"
#include "pack.h"
#include "csum-file.h"
void reset_pack_idx_option(struct pack_idx_option *opts)
{
memset(opts, 0, sizeof(*opts));
opts->version = 2;
opts->off32_limit = 0x7fffffff;
}
static int sha1_compare(const void *_a, const void *_b)
{
struct pack_idx_entry *a = *(struct pack_idx_entry **)_a;
struct pack_idx_entry *b = *(struct pack_idx_entry **)_b;
return hashcmp(a->sha1, b->sha1);
}
/*
* On entry *sha1 contains the pack content SHA1 hash, on exit it is
* the SHA1 hash of sorted object names. The objects array passed in
* will be sorted by SHA1 on exit.
*/
const char *write_idx_file(const char *index_name, struct pack_idx_entry **objects,
int nr_objects, const struct pack_idx_option *opts,
unsigned char *sha1)
{
struct sha1file *f;
struct pack_idx_entry **sorted_by_sha, **list, **last;
off_t last_obj_offset = 0;
uint32_t array[256];
int i, fd;
git_SHA_CTX ctx;
uint32_t index_version;
if (nr_objects) {
sorted_by_sha = objects;
list = sorted_by_sha;
last = sorted_by_sha + nr_objects;
for (i = 0; i < nr_objects; ++i) {
if (objects[i]->offset > last_obj_offset)
last_obj_offset = objects[i]->offset;
}
qsort(sorted_by_sha, nr_objects, sizeof(sorted_by_sha[0]),
sha1_compare);
}
else
sorted_by_sha = list = last = NULL;
if (opts->flags & WRITE_IDX_VERIFY) {
assert(index_name);
f = sha1fd_check(index_name);
} else {
if (!index_name) {
static char tmpfile[PATH_MAX];
fd = odb_mkstemp(tmpfile, sizeof(tmpfile), "pack/tmp_idx_XXXXXX");
index_name = xstrdup(tmpfile);
} else {
unlink(index_name);
fd = open(index_name, O_CREAT|O_EXCL|O_WRONLY, 0600);
}
if (fd < 0)
die_errno("unable to create '%s'", index_name);
f = sha1fd(fd, index_name);
}
/* if last object's offset is >= 2^31 we should use index V2 */
index_version = (last_obj_offset >> 31) ? 2 : opts->version;
/* index versions 2 and above need a header */
if (index_version >= 2) {
struct pack_idx_header hdr;
hdr.idx_signature = htonl(PACK_IDX_SIGNATURE);
hdr.idx_version = htonl(index_version);
sha1write(f, &hdr, sizeof(hdr));
}
/*
* Write the first-level table (the list is sorted,
* but we use a 256-entry lookup to be able to avoid
* having to do eight extra binary search iterations).
*/
for (i = 0; i < 256; i++) {
struct pack_idx_entry **next = list;
while (next < last) {
struct pack_idx_entry *obj = *next;
if (obj->sha1[0] != i)
break;
next++;
}
array[i] = htonl(next - sorted_by_sha);
list = next;
}
sha1write(f, array, 256 * 4);
/* compute the SHA1 hash of sorted object names. */
git_SHA1_Init(&ctx);
/*
* Write the actual SHA1 entries..
*/
list = sorted_by_sha;
for (i = 0; i < nr_objects; i++) {
struct pack_idx_entry *obj = *list++;
if (index_version < 2) {
uint32_t offset = htonl(obj->offset);
sha1write(f, &offset, 4);
}
sha1write(f, obj->sha1, 20);
git_SHA1_Update(&ctx, obj->sha1, 20);
}
if (index_version >= 2) {
unsigned int nr_large_offset = 0;
/* write the crc32 table */
list = sorted_by_sha;
for (i = 0; i < nr_objects; i++) {
struct pack_idx_entry *obj = *list++;
uint32_t crc32_val = htonl(obj->crc32);
sha1write(f, &crc32_val, 4);
}
/* write the 32-bit offset table */
list = sorted_by_sha;
for (i = 0; i < nr_objects; i++) {
struct pack_idx_entry *obj = *list++;
uint32_t offset = (obj->offset <= opts->off32_limit) ?
obj->offset : (0x80000000 | nr_large_offset++);
offset = htonl(offset);
sha1write(f, &offset, 4);
}
/* write the large offset table */
list = sorted_by_sha;
while (nr_large_offset) {
struct pack_idx_entry *obj = *list++;
uint64_t offset = obj->offset;
if (offset > opts->off32_limit) {
uint32_t split[2];
split[0] = htonl(offset >> 32);
split[1] = htonl(offset & 0xffffffff);
sha1write(f, split, 8);
nr_large_offset--;
}
}
}
sha1write(f, sha1, 20);
sha1close(f, NULL, ((opts->flags & WRITE_IDX_VERIFY)
? CSUM_CLOSE : CSUM_FSYNC));
git_SHA1_Final(sha1, &ctx);
return index_name;
}
/*
* Update pack header with object_count and compute new SHA1 for pack data
* associated to pack_fd, and write that SHA1 at the end. That new SHA1
* is also returned in new_pack_sha1.
*
* If partial_pack_sha1 is non null, then the SHA1 of the existing pack
* (without the header update) is computed and validated against the
* one provided in partial_pack_sha1. The validation is performed at
* partial_pack_offset bytes in the pack file. The SHA1 of the remaining
* data (i.e. from partial_pack_offset to the end) is then computed and
* returned in partial_pack_sha1.
*
* Note that new_pack_sha1 is updated last, so both new_pack_sha1 and
* partial_pack_sha1 can refer to the same buffer if the caller is not
* interested in the resulting SHA1 of pack data above partial_pack_offset.
*/
void fixup_pack_header_footer(int pack_fd,
unsigned char *new_pack_sha1,
const char *pack_name,
uint32_t object_count,
unsigned char *partial_pack_sha1,
off_t partial_pack_offset)
{
int aligned_sz, buf_sz = 8 * 1024;
git_SHA_CTX old_sha1_ctx, new_sha1_ctx;
struct pack_header hdr;
char *buf;
git_SHA1_Init(&old_sha1_ctx);
git_SHA1_Init(&new_sha1_ctx);
if (lseek(pack_fd, 0, SEEK_SET) != 0)
die_errno("Failed seeking to start of '%s'", pack_name);
if (read_in_full(pack_fd, &hdr, sizeof(hdr)) != sizeof(hdr))
die_errno("Unable to reread header of '%s'", pack_name);
if (lseek(pack_fd, 0, SEEK_SET) != 0)
die_errno("Failed seeking to start of '%s'", pack_name);
git_SHA1_Update(&old_sha1_ctx, &hdr, sizeof(hdr));
hdr.hdr_entries = htonl(object_count);
git_SHA1_Update(&new_sha1_ctx, &hdr, sizeof(hdr));
write_or_die(pack_fd, &hdr, sizeof(hdr));
partial_pack_offset -= sizeof(hdr);
buf = xmalloc(buf_sz);
aligned_sz = buf_sz - sizeof(hdr);
for (;;) {
ssize_t m, n;
m = (partial_pack_sha1 && partial_pack_offset < aligned_sz) ?
partial_pack_offset : aligned_sz;
n = xread(pack_fd, buf, m);
if (!n)
break;
if (n < 0)
die_errno("Failed to checksum '%s'", pack_name);
git_SHA1_Update(&new_sha1_ctx, buf, n);
aligned_sz -= n;
if (!aligned_sz)
aligned_sz = buf_sz;
if (!partial_pack_sha1)
continue;
git_SHA1_Update(&old_sha1_ctx, buf, n);
partial_pack_offset -= n;
if (partial_pack_offset == 0) {
unsigned char sha1[20];
git_SHA1_Final(sha1, &old_sha1_ctx);
if (hashcmp(sha1, partial_pack_sha1) != 0)
die("Unexpected checksum for %s "
"(disk corruption?)", pack_name);
/*
* Now let's compute the SHA1 of the remainder of the
* pack, which also means making partial_pack_offset
* big enough not to matter anymore.
*/
git_SHA1_Init(&old_sha1_ctx);
partial_pack_offset = ~partial_pack_offset;
partial_pack_offset -= MSB(partial_pack_offset, 1);
}
}
free(buf);
if (partial_pack_sha1)
git_SHA1_Final(partial_pack_sha1, &old_sha1_ctx);
git_SHA1_Final(new_pack_sha1, &new_sha1_ctx);
write_or_die(pack_fd, new_pack_sha1, 20);
fsync_or_die(pack_fd, pack_name);
}
char *index_pack_lockfile(int ip_out)
{
char packname[46];
/*
* The first thing we expect from index-pack's output
* is "pack\t%40s\n" or "keep\t%40s\n" (46 bytes) where
* %40s is the newly created pack SHA1 name. In the "keep"
* case, we need it to remove the corresponding .keep file
* later on. If we don't get that then tough luck with it.
*/
if (read_in_full(ip_out, packname, 46) == 46 && packname[45] == '\n' &&
memcmp(packname, "keep\t", 5) == 0) {
char path[PATH_MAX];
packname[45] = 0;
snprintf(path, sizeof(path), "%s/pack/pack-%s.keep",
get_object_directory(), packname + 5);
return xstrdup(path);
}
return NULL;
}
/*
* The per-object header is a pretty dense thing, which is
* - first byte: low four bits are "size", then three bits of "type",
* and the high bit is "size continues".
* - each byte afterwards: low seven bits are size continuation,
* with the high bit being "size continues"
*/
int encode_in_pack_object_header(enum object_type type, uintmax_t size, unsigned char *hdr)
{
int n = 1;
unsigned char c;
if (type < OBJ_COMMIT || type > OBJ_REF_DELTA)
die("bad type %d", type);
c = (type << 4) | (size & 15);
size >>= 4;
while (size) {
*hdr++ = c | 0x80;
c = size & 0x7f;
size >>= 7;
n++;
}
*hdr = c;
return n;
}