mirror of
https://github.com/git/git.git
synced 2024-05-27 14:36:11 +02:00
7903efb717
The creationToken heuristic provides an ordering on the bundles
advertised by a bundle list. Teach the Git client to download bundles
differently when this heuristic is advertised.
The bundles in the list are sorted by their advertised creationToken
values, then downloaded in decreasing order. This avoids the previous
strategy of downloading bundles in an arbitrary order and attempting
to apply them (likely failing in the case of required commits) until
discovering the order through attempted unbundling.
During a fresh 'git clone', it may make sense to download the bundles in
increasing order, since that would prevent the need to attempt
unbundling a bundle with required commits that do not exist in our empty
object store. The cost of testing an unbundle is quite low, and instead
the chosen order is optimizing for a future bundle download during a
'git fetch' operation with a non-empty object store.
Since the Git client continues fetching from the Git remote after
downloading and unbundling bundles, the client's object store can be
ahead of the bundle provider's object store. The next time it attempts
to download from the bundle list, it makes most sense to download only
the most-recent bundles until all tips successfully unbundle. The
strategy implemented here provides that short-circuit where the client
downloads a minimal set of bundles.
However, we are not satisfied by the naive approach of downloading
bundles until one successfully unbundles, expecting the earlier bundles
to successfully unbundle now. The example repository in t5558
demonstrates this well:
---------------- bundle-4
4
/ \
----|---|------- bundle-3
| |
| 3
| |
----|---|------- bundle-2
| |
2 |
| |
----|---|------- bundle-1
\ /
1
|
(previous commits)
In this repository, if we already have the objects for bundle-1 and then
try to fetch from this list, the naive approach will fail. bundle-4
requires both bundle-3 and bundle-2, though bundle-3 will successfully
unbundle without bundle-2. Thus, the algorithm needs to keep this in
mind.
A later implementation detail will store the maximum creationToken seen
during such a bundle download, and the client will avoid downloading a
bundle unless its creationToken is strictly greater than that stored
value. For now, if the client seeks to download from an identical
bundle list since its previous download, it will download the
most-recent bundle then stop since its required commits are already in
the object store.
Add tests that exercise this behavior, but we will expand upon these
tests when incremental downloads during 'git fetch' make use of
creationToken values.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
884 lines
24 KiB
Bash
Executable File
884 lines
24 KiB
Bash
Executable File
#!/bin/sh
|
|
|
|
test_description=clone
|
|
|
|
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
|
|
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
|
|
|
|
. ./test-lib.sh
|
|
|
|
X=
|
|
test_have_prereq !MINGW || X=.exe
|
|
|
|
test_expect_success setup '
|
|
|
|
rm -fr .git &&
|
|
test_create_repo src &&
|
|
(
|
|
cd src &&
|
|
>file &&
|
|
git add file &&
|
|
git commit -m initial &&
|
|
echo 1 >file &&
|
|
git add file &&
|
|
git commit -m updated
|
|
)
|
|
|
|
'
|
|
|
|
test_expect_success 'clone with excess parameters (1)' '
|
|
|
|
rm -fr dst &&
|
|
test_must_fail git clone -n src dst junk
|
|
|
|
'
|
|
|
|
test_expect_success 'clone with excess parameters (2)' '
|
|
|
|
rm -fr dst &&
|
|
test_must_fail git clone -n "file://$(pwd)/src" dst junk
|
|
|
|
'
|
|
|
|
test_expect_success 'output from clone' '
|
|
rm -fr dst &&
|
|
git clone -n "file://$(pwd)/src" dst >output 2>&1 &&
|
|
test $(grep Clon output | wc -l) = 1
|
|
'
|
|
|
|
test_expect_success 'clone does not keep pack' '
|
|
|
|
rm -fr dst &&
|
|
git clone -n "file://$(pwd)/src" dst &&
|
|
! test -f dst/file &&
|
|
! (echo dst/.git/objects/pack/pack-* | grep "\.keep")
|
|
|
|
'
|
|
|
|
test_expect_success 'clone checks out files' '
|
|
|
|
rm -fr dst &&
|
|
git clone src dst &&
|
|
test -f dst/file
|
|
|
|
'
|
|
|
|
test_expect_success 'clone respects GIT_WORK_TREE' '
|
|
|
|
GIT_WORK_TREE=worktree git clone src bare &&
|
|
test -f bare/config &&
|
|
test -f worktree/file
|
|
|
|
'
|
|
|
|
test_expect_success 'clone from hooks' '
|
|
|
|
test_create_repo r0 &&
|
|
cd r0 &&
|
|
test_commit initial &&
|
|
cd .. &&
|
|
git init r1 &&
|
|
cd r1 &&
|
|
test_hook pre-commit <<-\EOF &&
|
|
git clone ../r0 ../r2
|
|
exit 1
|
|
EOF
|
|
: >file &&
|
|
git add file &&
|
|
test_must_fail git commit -m invoke-hook &&
|
|
cd .. &&
|
|
test_cmp r0/.git/HEAD r2/.git/HEAD &&
|
|
test_cmp r0/initial.t r2/initial.t
|
|
|
|
'
|
|
|
|
test_expect_success 'clone creates intermediate directories' '
|
|
|
|
git clone src long/path/to/dst &&
|
|
test -f long/path/to/dst/file
|
|
|
|
'
|
|
|
|
test_expect_success 'clone creates intermediate directories for bare repo' '
|
|
|
|
git clone --bare src long/path/to/bare/dst &&
|
|
test -f long/path/to/bare/dst/config
|
|
|
|
'
|
|
|
|
test_expect_success 'clone --mirror' '
|
|
|
|
git clone --mirror src mirror &&
|
|
test -f mirror/HEAD &&
|
|
test ! -f mirror/file &&
|
|
FETCH="$(cd mirror && git config remote.origin.fetch)" &&
|
|
test "+refs/*:refs/*" = "$FETCH" &&
|
|
MIRROR="$(cd mirror && git config --bool remote.origin.mirror)" &&
|
|
test "$MIRROR" = true
|
|
|
|
'
|
|
|
|
test_expect_success 'clone --mirror with detached HEAD' '
|
|
|
|
( cd src && git checkout HEAD^ && git rev-parse HEAD >../expected ) &&
|
|
git clone --mirror src mirror.detached &&
|
|
( cd src && git checkout - ) &&
|
|
GIT_DIR=mirror.detached git rev-parse HEAD >actual &&
|
|
test_cmp expected actual
|
|
|
|
'
|
|
|
|
test_expect_success 'clone --bare with detached HEAD' '
|
|
|
|
( cd src && git checkout HEAD^ && git rev-parse HEAD >../expected ) &&
|
|
git clone --bare src bare.detached &&
|
|
( cd src && git checkout - ) &&
|
|
GIT_DIR=bare.detached git rev-parse HEAD >actual &&
|
|
test_cmp expected actual
|
|
|
|
'
|
|
|
|
test_expect_success 'clone --bare names the local repository <name>.git' '
|
|
|
|
git clone --bare src &&
|
|
test -d src.git
|
|
|
|
'
|
|
|
|
test_expect_success 'clone --mirror does not repeat tags' '
|
|
|
|
(cd src &&
|
|
git tag some-tag HEAD) &&
|
|
git clone --mirror src mirror2 &&
|
|
(cd mirror2 &&
|
|
git show-ref 2> clone.err > clone.out) &&
|
|
! grep Duplicate mirror2/clone.err &&
|
|
grep some-tag mirror2/clone.out
|
|
|
|
'
|
|
|
|
test_expect_success 'clone to destination with trailing /' '
|
|
|
|
git clone src target-1/ &&
|
|
T=$( cd target-1 && git rev-parse HEAD ) &&
|
|
S=$( cd src && git rev-parse HEAD ) &&
|
|
test "$T" = "$S"
|
|
|
|
'
|
|
|
|
test_expect_success 'clone to destination with extra trailing /' '
|
|
|
|
git clone src target-2/// &&
|
|
T=$( cd target-2 && git rev-parse HEAD ) &&
|
|
S=$( cd src && git rev-parse HEAD ) &&
|
|
test "$T" = "$S"
|
|
|
|
'
|
|
|
|
test_expect_success 'clone to an existing empty directory' '
|
|
mkdir target-3 &&
|
|
git clone src target-3 &&
|
|
T=$( cd target-3 && git rev-parse HEAD ) &&
|
|
S=$( cd src && git rev-parse HEAD ) &&
|
|
test "$T" = "$S"
|
|
'
|
|
|
|
test_expect_success 'clone to an existing non-empty directory' '
|
|
mkdir target-4 &&
|
|
>target-4/Fakefile &&
|
|
test_must_fail git clone src target-4
|
|
'
|
|
|
|
test_expect_success 'clone to an existing path' '
|
|
>target-5 &&
|
|
test_must_fail git clone src target-5
|
|
'
|
|
|
|
test_expect_success 'clone a void' '
|
|
mkdir src-0 &&
|
|
(
|
|
cd src-0 && git init
|
|
) &&
|
|
git clone "file://$(pwd)/src-0" target-6 2>err-6 &&
|
|
! grep "fatal:" err-6 &&
|
|
(
|
|
cd src-0 && test_commit A
|
|
) &&
|
|
git clone "file://$(pwd)/src-0" target-7 2>err-7 &&
|
|
! grep "fatal:" err-7 &&
|
|
# There is no reason to insist they are bit-for-bit
|
|
# identical, but this test should suffice for now.
|
|
test_cmp target-6/.git/config target-7/.git/config
|
|
'
|
|
|
|
test_expect_success 'clone respects global branch.autosetuprebase' '
|
|
(
|
|
test_config="$HOME/.gitconfig" &&
|
|
git config -f "$test_config" branch.autosetuprebase remote &&
|
|
rm -fr dst &&
|
|
git clone src dst &&
|
|
cd dst &&
|
|
actual="z$(git config branch.main.rebase)" &&
|
|
test ztrue = $actual
|
|
)
|
|
'
|
|
|
|
test_expect_success 'respect url-encoding of file://' '
|
|
git init x+y &&
|
|
git clone "file://$PWD/x+y" xy-url-1 &&
|
|
git clone "file://$PWD/x%2By" xy-url-2
|
|
'
|
|
|
|
test_expect_success 'do not query-string-decode + in URLs' '
|
|
rm -rf x+y &&
|
|
git init "x y" &&
|
|
test_must_fail git clone "file://$PWD/x+y" xy-no-plus
|
|
'
|
|
|
|
test_expect_success 'do not respect url-encoding of non-url path' '
|
|
git init x+y &&
|
|
test_must_fail git clone x%2By xy-regular &&
|
|
git clone x+y xy-regular
|
|
'
|
|
|
|
test_expect_success 'clone separate gitdir' '
|
|
rm -rf dst &&
|
|
git clone --separate-git-dir realgitdir src dst &&
|
|
test -d realgitdir/refs
|
|
'
|
|
|
|
test_expect_success 'clone separate gitdir: output' '
|
|
echo "gitdir: $(pwd)/realgitdir" >expected &&
|
|
test_cmp expected dst/.git
|
|
'
|
|
|
|
test_expect_success 'clone from .git file' '
|
|
git clone dst/.git dst2
|
|
'
|
|
|
|
test_expect_success 'fetch from .git gitfile' '
|
|
(
|
|
cd dst2 &&
|
|
git fetch ../dst/.git
|
|
)
|
|
'
|
|
|
|
test_expect_success 'fetch from gitfile parent' '
|
|
(
|
|
cd dst2 &&
|
|
git fetch ../dst
|
|
)
|
|
'
|
|
|
|
test_expect_success 'clone separate gitdir where target already exists' '
|
|
rm -rf dst &&
|
|
echo foo=bar >>realgitdir/config &&
|
|
test_must_fail git clone --separate-git-dir realgitdir src dst &&
|
|
grep foo=bar realgitdir/config
|
|
'
|
|
|
|
test_expect_success 'clone --reference from original' '
|
|
git clone --shared --bare src src-1 &&
|
|
git clone --bare src src-2 &&
|
|
git clone --reference=src-2 --bare src-1 target-8 &&
|
|
grep /src-2/ target-8/objects/info/alternates
|
|
'
|
|
|
|
test_expect_success 'clone with more than one --reference' '
|
|
git clone --bare src src-3 &&
|
|
git clone --bare src src-4 &&
|
|
git clone --reference=src-3 --reference=src-4 src target-9 &&
|
|
grep /src-3/ target-9/.git/objects/info/alternates &&
|
|
grep /src-4/ target-9/.git/objects/info/alternates
|
|
'
|
|
|
|
test_expect_success 'clone from original with relative alternate' '
|
|
mkdir nest &&
|
|
git clone --bare src nest/src-5 &&
|
|
echo ../../../src/.git/objects >nest/src-5/objects/info/alternates &&
|
|
git clone --bare nest/src-5 target-10 &&
|
|
grep /src/\\.git/objects target-10/objects/info/alternates
|
|
'
|
|
|
|
test_expect_success 'clone checking out a tag' '
|
|
git clone --branch=some-tag src dst.tag &&
|
|
GIT_DIR=src/.git git rev-parse some-tag >expected &&
|
|
GIT_DIR=dst.tag/.git git rev-parse HEAD >actual &&
|
|
test_cmp expected actual &&
|
|
GIT_DIR=dst.tag/.git git config remote.origin.fetch >fetch.actual &&
|
|
echo "+refs/heads/*:refs/remotes/origin/*" >fetch.expected &&
|
|
test_cmp fetch.expected fetch.actual
|
|
'
|
|
|
|
test_expect_success 'set up ssh wrapper' '
|
|
cp "$GIT_BUILD_DIR/t/helper/test-fake-ssh$X" \
|
|
"$TRASH_DIRECTORY/ssh$X" &&
|
|
GIT_SSH="$TRASH_DIRECTORY/ssh$X" &&
|
|
export GIT_SSH &&
|
|
export TRASH_DIRECTORY &&
|
|
>"$TRASH_DIRECTORY"/ssh-output
|
|
'
|
|
|
|
copy_ssh_wrapper_as () {
|
|
rm -f "${1%$X}$X" &&
|
|
cp "$TRASH_DIRECTORY/ssh$X" "${1%$X}$X" &&
|
|
test_when_finished "rm $(git rev-parse --sq-quote "${1%$X}$X")" &&
|
|
GIT_SSH="${1%$X}$X" &&
|
|
test_when_finished "GIT_SSH=\"\$TRASH_DIRECTORY/ssh\$X\""
|
|
}
|
|
|
|
expect_ssh () {
|
|
test_when_finished '
|
|
(cd "$TRASH_DIRECTORY" && rm -f ssh-expect && >ssh-output)
|
|
' &&
|
|
{
|
|
case "$#" in
|
|
1)
|
|
;;
|
|
2)
|
|
echo "ssh: $1 git-upload-pack '$2'"
|
|
;;
|
|
3)
|
|
echo "ssh: $1 $2 git-upload-pack '$3'"
|
|
;;
|
|
*)
|
|
echo "ssh: $1 $2 git-upload-pack '$3' $4"
|
|
esac
|
|
} >"$TRASH_DIRECTORY/ssh-expect" &&
|
|
(cd "$TRASH_DIRECTORY" && test_cmp ssh-expect ssh-output)
|
|
}
|
|
|
|
test_expect_success 'clone myhost:src uses ssh' '
|
|
GIT_TEST_PROTOCOL_VERSION=0 git clone myhost:src ssh-clone &&
|
|
expect_ssh myhost src
|
|
'
|
|
|
|
test_expect_success !MINGW,!CYGWIN 'clone local path foo:bar' '
|
|
cp -R src "foo:bar" &&
|
|
git clone "foo:bar" foobar &&
|
|
expect_ssh none
|
|
'
|
|
|
|
test_expect_success 'bracketed hostnames are still ssh' '
|
|
GIT_TEST_PROTOCOL_VERSION=0 git clone "[myhost:123]:src" ssh-bracket-clone &&
|
|
expect_ssh "-p 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'OpenSSH variant passes -4' '
|
|
GIT_TEST_PROTOCOL_VERSION=0 git clone -4 "[myhost:123]:src" ssh-ipv4-clone &&
|
|
expect_ssh "-4 -p 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'variant can be overridden' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/putty" &&
|
|
git -c ssh.variant=putty clone -4 "[myhost:123]:src" ssh-putty-clone &&
|
|
expect_ssh "-4 -P 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'variant=auto picks based on basename' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" &&
|
|
git -c ssh.variant=auto clone -4 "[myhost:123]:src" ssh-auto-clone &&
|
|
expect_ssh "-4 -P 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'simple does not support -4/-6' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/simple" &&
|
|
test_must_fail git clone -4 "myhost:src" ssh-4-clone-simple
|
|
'
|
|
|
|
test_expect_success 'simple does not support port' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/simple" &&
|
|
test_must_fail git clone "[myhost:123]:src" ssh-bracket-clone-simple
|
|
'
|
|
|
|
test_expect_success 'uplink is treated as simple' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/uplink" &&
|
|
test_must_fail git clone "[myhost:123]:src" ssh-bracket-clone-uplink &&
|
|
git clone "myhost:src" ssh-clone-uplink &&
|
|
expect_ssh myhost src
|
|
'
|
|
|
|
test_expect_success 'OpenSSH-like uplink is treated as ssh' '
|
|
write_script "$TRASH_DIRECTORY/uplink" <<-EOF &&
|
|
if test "\$1" = "-G"
|
|
then
|
|
exit 0
|
|
fi &&
|
|
exec "\$TRASH_DIRECTORY/ssh$X" "\$@"
|
|
EOF
|
|
test_when_finished "rm -f \"\$TRASH_DIRECTORY/uplink\"" &&
|
|
GIT_SSH="$TRASH_DIRECTORY/uplink" &&
|
|
test_when_finished "GIT_SSH=\"\$TRASH_DIRECTORY/ssh\$X\"" &&
|
|
GIT_TEST_PROTOCOL_VERSION=0 git clone "[myhost:123]:src" ssh-bracket-clone-sshlike-uplink &&
|
|
expect_ssh "-p 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'plink is treated specially (as putty)' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" &&
|
|
git clone "[myhost:123]:src" ssh-bracket-clone-plink-0 &&
|
|
expect_ssh "-P 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'plink.exe is treated specially (as putty)' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink.exe" &&
|
|
git clone "[myhost:123]:src" ssh-bracket-clone-plink-1 &&
|
|
expect_ssh "-P 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'tortoiseplink is like putty, with extra arguments' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/tortoiseplink" &&
|
|
git clone "[myhost:123]:src" ssh-bracket-clone-plink-2 &&
|
|
expect_ssh "-batch -P 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'double quoted plink.exe in GIT_SSH_COMMAND' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink.exe" &&
|
|
GIT_SSH_COMMAND="\"$TRASH_DIRECTORY/plink.exe\" -v" \
|
|
git clone "[myhost:123]:src" ssh-bracket-clone-plink-3 &&
|
|
expect_ssh "-v -P 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'single quoted plink.exe in GIT_SSH_COMMAND' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink.exe" &&
|
|
GIT_SSH_COMMAND="$SQ$TRASH_DIRECTORY/plink.exe$SQ -v" \
|
|
git clone "[myhost:123]:src" ssh-bracket-clone-plink-4 &&
|
|
expect_ssh "-v -P 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'GIT_SSH_VARIANT overrides plink detection' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" &&
|
|
GIT_TEST_PROTOCOL_VERSION=0 GIT_SSH_VARIANT=ssh \
|
|
git clone "[myhost:123]:src" ssh-bracket-clone-variant-1 &&
|
|
expect_ssh "-p 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'ssh.variant overrides plink detection' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" &&
|
|
GIT_TEST_PROTOCOL_VERSION=0 git -c ssh.variant=ssh \
|
|
clone "[myhost:123]:src" ssh-bracket-clone-variant-2 &&
|
|
expect_ssh "-p 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'GIT_SSH_VARIANT overrides plink detection to plink' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" &&
|
|
GIT_SSH_VARIANT=plink \
|
|
git clone "[myhost:123]:src" ssh-bracket-clone-variant-3 &&
|
|
expect_ssh "-P 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'GIT_SSH_VARIANT overrides plink to tortoiseplink' '
|
|
copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" &&
|
|
GIT_SSH_VARIANT=tortoiseplink \
|
|
git clone "[myhost:123]:src" ssh-bracket-clone-variant-4 &&
|
|
expect_ssh "-batch -P 123" myhost src
|
|
'
|
|
|
|
test_expect_success 'clean failure on broken quoting' '
|
|
test_must_fail \
|
|
env GIT_SSH_COMMAND="${SQ}plink.exe -v" \
|
|
git clone "[myhost:123]:src" sq-failure
|
|
'
|
|
|
|
counter=0
|
|
# $1 url
|
|
# $2 none|host
|
|
# $3 path
|
|
test_clone_url () {
|
|
counter=$(($counter + 1))
|
|
test_might_fail env GIT_TEST_PROTOCOL_VERSION=0 git clone "$1" tmp$counter &&
|
|
shift &&
|
|
expect_ssh "$@"
|
|
}
|
|
|
|
test_expect_success !MINGW,!CYGWIN 'clone c:temp is ssl' '
|
|
test_clone_url c:temp c temp
|
|
'
|
|
|
|
test_expect_success MINGW 'clone c:temp is dos drive' '
|
|
test_clone_url c:temp none
|
|
'
|
|
|
|
#ip v4
|
|
for repo in rep rep/home/project 123
|
|
do
|
|
test_expect_success "clone host:$repo" '
|
|
test_clone_url host:$repo host $repo
|
|
'
|
|
done
|
|
|
|
#ipv6
|
|
for repo in rep rep/home/project 123
|
|
do
|
|
test_expect_success "clone [::1]:$repo" '
|
|
test_clone_url [::1]:$repo ::1 "$repo"
|
|
'
|
|
done
|
|
#home directory
|
|
test_expect_success "clone host:/~repo" '
|
|
test_clone_url host:/~repo host "~repo"
|
|
'
|
|
|
|
test_expect_success "clone [::1]:/~repo" '
|
|
test_clone_url [::1]:/~repo ::1 "~repo"
|
|
'
|
|
|
|
# Corner cases
|
|
for url in foo/bar:baz [foo]bar/baz:qux [foo/bar]:baz
|
|
do
|
|
test_expect_success "clone $url is not ssh" '
|
|
test_clone_url $url none
|
|
'
|
|
done
|
|
|
|
#with ssh:// scheme
|
|
#ignore trailing colon
|
|
for tcol in "" :
|
|
do
|
|
test_expect_success "clone ssh://host.xz$tcol/home/user/repo" '
|
|
test_clone_url "ssh://host.xz$tcol/home/user/repo" host.xz /home/user/repo
|
|
'
|
|
# from home directory
|
|
test_expect_success "clone ssh://host.xz$tcol/~repo" '
|
|
test_clone_url "ssh://host.xz$tcol/~repo" host.xz "~repo"
|
|
'
|
|
done
|
|
|
|
# with port number
|
|
test_expect_success 'clone ssh://host.xz:22/home/user/repo' '
|
|
test_clone_url "ssh://host.xz:22/home/user/repo" "-p 22 host.xz" "/home/user/repo"
|
|
'
|
|
|
|
# from home directory with port number
|
|
test_expect_success 'clone ssh://host.xz:22/~repo' '
|
|
test_clone_url "ssh://host.xz:22/~repo" "-p 22 host.xz" "~repo"
|
|
'
|
|
|
|
#IPv6
|
|
for tuah in ::1 [::1] [::1]: user@::1 user@[::1] user@[::1]: [user@::1] [user@::1]:
|
|
do
|
|
ehost=$(echo $tuah | sed -e "s/1]:/1]/" | tr -d "[]")
|
|
test_expect_success "clone ssh://$tuah/home/user/repo" "
|
|
test_clone_url ssh://$tuah/home/user/repo $ehost /home/user/repo
|
|
"
|
|
done
|
|
|
|
#IPv6 from home directory
|
|
for tuah in ::1 [::1] user@::1 user@[::1] [user@::1]
|
|
do
|
|
euah=$(echo $tuah | tr -d "[]")
|
|
test_expect_success "clone ssh://$tuah/~repo" "
|
|
test_clone_url ssh://$tuah/~repo $euah '~repo'
|
|
"
|
|
done
|
|
|
|
#IPv6 with port number
|
|
for tuah in [::1] user@[::1] [user@::1]
|
|
do
|
|
euah=$(echo $tuah | tr -d "[]")
|
|
test_expect_success "clone ssh://$tuah:22/home/user/repo" "
|
|
test_clone_url ssh://$tuah:22/home/user/repo '-p 22' $euah /home/user/repo
|
|
"
|
|
done
|
|
|
|
#IPv6 from home directory with port number
|
|
for tuah in [::1] user@[::1] [user@::1]
|
|
do
|
|
euah=$(echo $tuah | tr -d "[]")
|
|
test_expect_success "clone ssh://$tuah:22/~repo" "
|
|
test_clone_url ssh://$tuah:22/~repo '-p 22' $euah '~repo'
|
|
"
|
|
done
|
|
|
|
test_expect_success 'clone from a repository with two identical branches' '
|
|
|
|
(
|
|
cd src &&
|
|
git checkout -b another main
|
|
) &&
|
|
git clone src target-11 &&
|
|
test "z$( cd target-11 && git symbolic-ref HEAD )" = zrefs/heads/another
|
|
|
|
'
|
|
|
|
test_expect_success 'shallow clone locally' '
|
|
git clone --depth=1 --no-local src ssrrcc &&
|
|
git clone ssrrcc ddsstt &&
|
|
test_cmp ssrrcc/.git/shallow ddsstt/.git/shallow &&
|
|
( cd ddsstt && git fsck )
|
|
'
|
|
|
|
test_expect_success 'GIT_TRACE_PACKFILE produces a usable pack' '
|
|
rm -rf dst.git &&
|
|
GIT_TRACE_PACKFILE=$PWD/tmp.pack git clone --no-local --bare src dst.git &&
|
|
git init --bare replay.git &&
|
|
git -C replay.git index-pack -v --stdin <tmp.pack
|
|
'
|
|
|
|
test_expect_success 'clone on case-insensitive fs' '
|
|
git init icasefs &&
|
|
(
|
|
cd icasefs &&
|
|
o=$(git hash-object -w --stdin </dev/null | hex2oct) &&
|
|
t=$(printf "100644 X\0${o}100644 x\0${o}" |
|
|
git hash-object -w -t tree --stdin) &&
|
|
c=$(git commit-tree -m bogus $t) &&
|
|
git update-ref refs/heads/bogus $c &&
|
|
git clone -b bogus . bogus 2>warning
|
|
)
|
|
'
|
|
|
|
test_expect_success CASE_INSENSITIVE_FS 'colliding file detection' '
|
|
grep X icasefs/warning &&
|
|
grep x icasefs/warning &&
|
|
test_i18ngrep "the following paths have collided" icasefs/warning
|
|
'
|
|
|
|
test_expect_success 'clone with GIT_DEFAULT_HASH' '
|
|
(
|
|
sane_unset GIT_DEFAULT_HASH &&
|
|
git init --object-format=sha1 test-sha1 &&
|
|
git init --object-format=sha256 test-sha256
|
|
) &&
|
|
test_commit -C test-sha1 foo &&
|
|
test_commit -C test-sha256 foo &&
|
|
GIT_DEFAULT_HASH=sha1 git clone test-sha256 test-clone-sha256 &&
|
|
GIT_DEFAULT_HASH=sha256 git clone test-sha1 test-clone-sha1 &&
|
|
git -C test-clone-sha1 status &&
|
|
git -C test-clone-sha256 status
|
|
'
|
|
|
|
partial_clone_server () {
|
|
SERVER="$1" &&
|
|
|
|
rm -rf "$SERVER" client &&
|
|
test_create_repo "$SERVER" &&
|
|
test_commit -C "$SERVER" one &&
|
|
HASH1=$(git -C "$SERVER" hash-object one.t) &&
|
|
git -C "$SERVER" revert HEAD &&
|
|
test_commit -C "$SERVER" two &&
|
|
HASH2=$(git -C "$SERVER" hash-object two.t) &&
|
|
test_config -C "$SERVER" uploadpack.allowfilter 1 &&
|
|
test_config -C "$SERVER" uploadpack.allowanysha1inwant 1
|
|
}
|
|
|
|
partial_clone () {
|
|
SERVER="$1" &&
|
|
URL="$2" &&
|
|
|
|
partial_clone_server "${SERVER}" &&
|
|
git clone --filter=blob:limit=0 "$URL" client &&
|
|
|
|
git -C client fsck &&
|
|
|
|
# Ensure that unneeded blobs are not inadvertently fetched.
|
|
test_config -C client remote.origin.promisor "false" &&
|
|
git -C client config --unset remote.origin.partialclonefilter &&
|
|
test_must_fail git -C client cat-file -e "$HASH1" &&
|
|
|
|
# But this blob was fetched, because clone performs an initial checkout
|
|
git -C client cat-file -e "$HASH2"
|
|
}
|
|
|
|
test_expect_success 'partial clone' '
|
|
partial_clone server "file://$(pwd)/server"
|
|
'
|
|
|
|
test_expect_success 'partial clone with -o' '
|
|
partial_clone_server server &&
|
|
git clone -o blah --filter=blob:limit=0 "file://$(pwd)/server" client &&
|
|
test_cmp_config -C client "blob:limit=0" --get-all remote.blah.partialclonefilter
|
|
'
|
|
|
|
test_expect_success 'partial clone: warn if server does not support object filtering' '
|
|
rm -rf server client &&
|
|
test_create_repo server &&
|
|
test_commit -C server one &&
|
|
|
|
git clone --filter=blob:limit=0 "file://$(pwd)/server" client 2> err &&
|
|
|
|
test_i18ngrep "filtering not recognized by server" err
|
|
'
|
|
|
|
test_expect_success 'batch missing blob request during checkout' '
|
|
rm -rf server client &&
|
|
|
|
test_create_repo server &&
|
|
echo a >server/a &&
|
|
echo b >server/b &&
|
|
git -C server add a b &&
|
|
|
|
git -C server commit -m x &&
|
|
echo aa >server/a &&
|
|
echo bb >server/b &&
|
|
git -C server add a b &&
|
|
git -C server commit -m x &&
|
|
|
|
test_config -C server uploadpack.allowfilter 1 &&
|
|
test_config -C server uploadpack.allowanysha1inwant 1 &&
|
|
|
|
git clone --filter=blob:limit=0 "file://$(pwd)/server" client &&
|
|
|
|
# Ensure that there is only one negotiation by checking that there is
|
|
# only "done" line sent. ("done" marks the end of negotiation.)
|
|
GIT_TRACE_PACKET="$(pwd)/trace" \
|
|
GIT_TRACE2_EVENT="$(pwd)/trace2_event" \
|
|
git -C client -c trace2.eventNesting=5 checkout HEAD^ &&
|
|
grep \"key\":\"total_rounds\",\"value\":\"1\" trace2_event >trace_lines &&
|
|
test_line_count = 1 trace_lines &&
|
|
grep "fetch> done" trace >done_lines &&
|
|
test_line_count = 1 done_lines
|
|
'
|
|
|
|
test_expect_success 'batch missing blob request does not inadvertently try to fetch gitlinks' '
|
|
rm -rf server client &&
|
|
|
|
test_create_repo repo_for_submodule &&
|
|
test_commit -C repo_for_submodule x &&
|
|
|
|
test_create_repo server &&
|
|
echo a >server/a &&
|
|
echo b >server/b &&
|
|
git -C server add a b &&
|
|
git -C server commit -m x &&
|
|
|
|
echo aa >server/a &&
|
|
echo bb >server/b &&
|
|
# Also add a gitlink pointing to an arbitrary repository
|
|
test_config_global protocol.file.allow always &&
|
|
git -C server submodule add "$(pwd)/repo_for_submodule" c &&
|
|
git -C server add a b c &&
|
|
git -C server commit -m x &&
|
|
|
|
test_config -C server uploadpack.allowfilter 1 &&
|
|
test_config -C server uploadpack.allowanysha1inwant 1 &&
|
|
|
|
# Make sure that it succeeds
|
|
git clone --filter=blob:limit=0 "file://$(pwd)/server" client
|
|
'
|
|
|
|
. "$TEST_DIRECTORY"/lib-httpd.sh
|
|
start_httpd
|
|
|
|
test_expect_success 'partial clone using HTTP' '
|
|
partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server"
|
|
'
|
|
|
|
test_expect_success 'reject cloning shallow repository using HTTP' '
|
|
test_when_finished "rm -rf repo" &&
|
|
git clone --bare --no-local --depth=1 src "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" &&
|
|
test_must_fail git -c protocol.version=2 clone --reject-shallow $HTTPD_URL/smart/repo.git repo 2>err &&
|
|
test_i18ngrep -e "source repository is shallow, reject to clone." err &&
|
|
|
|
git clone --no-reject-shallow $HTTPD_URL/smart/repo.git repo
|
|
'
|
|
|
|
test_expect_success 'auto-discover bundle URI from HTTP clone' '
|
|
test_when_finished rm -rf trace.txt repo2 "$HTTPD_DOCUMENT_ROOT_PATH/repo2.git" &&
|
|
git -C src bundle create "$HTTPD_DOCUMENT_ROOT_PATH/everything.bundle" --all &&
|
|
git clone --bare --no-local src "$HTTPD_DOCUMENT_ROOT_PATH/repo2.git" &&
|
|
|
|
git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo2.git" config \
|
|
uploadpack.advertiseBundleURIs true &&
|
|
git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo2.git" config \
|
|
bundle.version 1 &&
|
|
git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo2.git" config \
|
|
bundle.mode all &&
|
|
git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo2.git" config \
|
|
bundle.everything.uri "$HTTPD_URL/everything.bundle" &&
|
|
|
|
GIT_TRACE2_EVENT="$(pwd)/trace.txt" \
|
|
git -c protocol.version=2 \
|
|
-c transfer.bundleURI=true clone \
|
|
$HTTPD_URL/smart/repo2.git repo2 &&
|
|
cat >pattern <<-EOF &&
|
|
"event":"child_start".*"argv":\["git-remote-https","$HTTPD_URL/everything.bundle"\]
|
|
EOF
|
|
grep -f pattern trace.txt
|
|
'
|
|
|
|
test_expect_success 'auto-discover multiple bundles from HTTP clone' '
|
|
test_when_finished rm -rf trace.txt repo3 "$HTTPD_DOCUMENT_ROOT_PATH/repo3.git" &&
|
|
|
|
test_commit -C src new &&
|
|
git -C src bundle create "$HTTPD_DOCUMENT_ROOT_PATH/new.bundle" HEAD~1..HEAD &&
|
|
git clone --bare --no-local src "$HTTPD_DOCUMENT_ROOT_PATH/repo3.git" &&
|
|
|
|
git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo3.git" config \
|
|
uploadpack.advertiseBundleURIs true &&
|
|
git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo3.git" config \
|
|
bundle.version 1 &&
|
|
git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo3.git" config \
|
|
bundle.mode all &&
|
|
|
|
git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo3.git" config \
|
|
bundle.everything.uri "$HTTPD_URL/everything.bundle" &&
|
|
git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo3.git" config \
|
|
bundle.new.uri "$HTTPD_URL/new.bundle" &&
|
|
|
|
GIT_TRACE2_EVENT="$(pwd)/trace.txt" \
|
|
git -c protocol.version=2 \
|
|
-c transfer.bundleURI=true clone \
|
|
$HTTPD_URL/smart/repo3.git repo3 &&
|
|
|
|
# We should fetch _both_ bundles
|
|
cat >pattern <<-EOF &&
|
|
"event":"child_start".*"argv":\["git-remote-https","$HTTPD_URL/everything.bundle"\]
|
|
EOF
|
|
grep -f pattern trace.txt &&
|
|
cat >pattern <<-EOF &&
|
|
"event":"child_start".*"argv":\["git-remote-https","$HTTPD_URL/new.bundle"\]
|
|
EOF
|
|
grep -f pattern trace.txt
|
|
'
|
|
|
|
test_expect_success 'auto-discover multiple bundles from HTTP clone: creationToken heuristic' '
|
|
test_when_finished rm -rf "$HTTPD_DOCUMENT_ROOT_PATH/repo4.git" &&
|
|
test_when_finished rm -rf clone-heuristic trace*.txt &&
|
|
|
|
test_commit -C src newest &&
|
|
git -C src bundle create "$HTTPD_DOCUMENT_ROOT_PATH/newest.bundle" HEAD~1..HEAD &&
|
|
git clone --bare --no-local src "$HTTPD_DOCUMENT_ROOT_PATH/repo4.git" &&
|
|
|
|
cat >>"$HTTPD_DOCUMENT_ROOT_PATH/repo4.git/config" <<-EOF &&
|
|
[uploadPack]
|
|
advertiseBundleURIs = true
|
|
|
|
[bundle]
|
|
version = 1
|
|
mode = all
|
|
heuristic = creationToken
|
|
|
|
[bundle "everything"]
|
|
uri = $HTTPD_URL/everything.bundle
|
|
creationtoken = 1
|
|
|
|
[bundle "new"]
|
|
uri = $HTTPD_URL/new.bundle
|
|
creationtoken = 2
|
|
|
|
[bundle "newest"]
|
|
uri = $HTTPD_URL/newest.bundle
|
|
creationtoken = 3
|
|
EOF
|
|
|
|
GIT_TRACE2_EVENT="$(pwd)/trace-clone.txt" \
|
|
git -c protocol.version=2 \
|
|
-c transfer.bundleURI=true clone \
|
|
"$HTTPD_URL/smart/repo4.git" clone-heuristic &&
|
|
|
|
cat >expect <<-EOF &&
|
|
$HTTPD_URL/newest.bundle
|
|
$HTTPD_URL/new.bundle
|
|
$HTTPD_URL/everything.bundle
|
|
EOF
|
|
|
|
# We should fetch all bundles in the expected order.
|
|
test_remote_https_urls <trace-clone.txt >actual &&
|
|
test_cmp expect actual
|
|
'
|
|
|
|
# DO NOT add non-httpd-specific tests here, because the last part of this
|
|
# test script is only executed when httpd is available and enabled.
|
|
|
|
test_done
|