Exposes the infrastructure from 9a8e35e98793af086f05d1ca9643052df9b44a74.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After a failed "git am" attempt:
git apply --reject --verbose .dotest/patch
applies hunks that are applicable and leaves *.rej files the
rejected hunks, and it reports what it is doing. With --index,
files with a rejected hunk do not get their index entries
updated at all, so "git diff" will show the hunks that
successfully got applied.
Without --verbose to remind the user that the patch updated some
other paths cleanly, it is very easy to lose track of the status
of the working tree, so --reject implies --verbose.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a high-level wrapper around the 'commit-diff' command
and used to produce cleaner history against the mirrored repository
through rebase/reset usage.
It's basically a more polished version of this:
for i in `git rev-list --no-merges remotes/git-svn..HEAD | tac`; do
git-svn commit-diff $i~1 $i
done
git reset --hard remotes/git-svn
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Does this make sense to other git-svn users out there?
pull can give funky history unless you understand how git-svn works
internally, which users should not be expected to do.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use list continuation to have better wrapping. This accounts for most of
the changes because it reindents a lot of text without applying other
changes.
Use cross-referencing for interlinking and the gitlink macro for pointing
to other tools in the git suite.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a short description and document a few selected options additionally to
the different "entities" in the standard calling convention. Advertise
other git repository browsers. Lastly, climb Mount Ego.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Inspired by the cvs annotate documentation improve and expand the man page
to also mention the limitations of file annotations. Since people coming
from the SVN/CVS world might first look here, also briefly advertise how
the pickaxe interface makes it easy to go beyond these limitation.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... and mention that '.' will list the local repo references.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I often find myself typing this but the common abbreviation "g" for
"again" has not been supported so far for some unknown reason.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied. The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, the command shows pathnames relative to the current
directory. Use --full-name (the same flag to do so in ls-files)
if you want to see the full pathname relative to the project root.
This makes it very pleasant to run in Emacs compilation (or
"grep-find") buffer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this option, the changed words are shown inline. For example,
if a file containing "This is foo" is changed to "This is bar", the diff
will now show "This is " in plain text, "foo" in red, and "bar" in green.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A small howto on how to setup GIT over HTTP transport protocol by
setting up WebDAV access on apache2.
[jc: minimum ispell fixes applied]
Signed-off-by: Rutger Nijlunsing <git@tux.tmfweb.nl>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Combine option descriptions in git-init-db(1). Reflect the changes to
additionally allow all users to read the created git repository.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was already documented in the options section of the manpage. This
patch implements it, adds it to the usage message, and mentions it at the
top of the manpage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
enable/disable colored output when the pager is in use
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since you can tar just a subdirectory of a certain revision, tell
the users so, by showing an example how to do it.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* pb/multi-fetch:
Teach git-http-fetch the --stdin switch
Teach git-local-fetch the --stdin switch
Make pull() support fetching multiple targets at once
Make pull() take some implicit data as explicit arguments
This makes it possible to fetch many commits (refs) at once, greatly
speeding up cg-clone.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, you can say
git --bare repack -a -d
inside a bare repository, and it will actually work. While at it,
also move the --version, --help and --exec-path options to the
handle_options() function.
While at documenting the new options, also document the --paginate
option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jt/format-patch:
builtin-log: typefix for recent format-patch changes.
Add option to set initial In-Reply-To/References
Add option to enable threading headers
git-format-patch: Make the second and subsequent mails replies to the first
For some repositories, deltas simply don't make sense. One can disable
them for git-repack by adding --window, but git-push insists on making
the deltas which can be very CPU-intensive for little benefit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, git-tar-tree(1) sets file and directories modes to 0666
or 0777. While this is both useful and acceptable for projects such
as the Linux Kernel, it might be excessive for other projects. With
this variable, it becomes possible to tell git-tar-tree(1) to apply
a specific umask to the modes above. The special value "user"
indicates that the user's current umask will be used. This should be
enough for most projects, as it will lead to the same permissions as
git-checkout(1) would use. The default value remains 0, which means
world read-write.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds support for -a which will add an "Author: " line, and possibly
a "Committer: " line to the bottom of the commit message for CVS.
The commit message parser is now a little bit better, and some warnings
have been cleaned up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add the --in-reply-to option to provide a Message-Id for an initial
In-Reply-To/References header, useful for including a new patch series as part
of an existing thread.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a --thread option to enable generation of In-Reply-To and References
headers, used to make the second and subsequent mails appear as replies to the
first.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes "[user@]" to use {startsb} and {endsb} to insert [ and ],
similar to how {caret} is used in git-rev-parse.txt.
[jc: Removed a well-intentioned comment that broke the final
formatting from the original patch. While we are at it,
updated the paragraph that claims to be equivalent to the
section that was updated earlier without making matching
changes.]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
