In the previous two commits, We just started preparing the `t5515` script
and part of `t/t5515/` for the upcoming change of the default
branch name to `main`. This patch adjusts the remainder of the supporting
material in `t/t5515/` (the patch adjusting all of `t/t5515/` would have
weighed more than 100kB and therefore not made it to the Git mailing
list for review).
Similar to what we did for the `t5515` script itself in the previous
commit, this patch was generated via:
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515/refs.*
In addition to that, we need to adjust some file _names_ in `t/t5515/`
because they encode the branch name:
eval "$(git ls-files t/t5515/refs.\* | sed -n \
-e 's/\(.*\)master\(.*\)/git mv & \1main\2;/p')"
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We just started preparing t5515 for the upcoming change of the default
branch name to `main`. This patch adjusts roughly half of the supporting
material in `t/t5515/` (the patch adjusting all of `t/t5515/` would have
weighed more than 100kB and therefore not made it to the Git mailing
list for review).
Similar to what we did for the `t5515` script itself in the previous
commit, this patch was generated via:
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515/fetch.*
In addition to that, we need to adjust some file _names_ in `t/t5515/`
because they encode the branch name:
eval "$(git ls-files t/t5515/fetch.\* | sed -n \
-e 's/\(.*\)master\(.*\)/git mv & \1main\2;/p')"
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the effort to change the default branch name to `main`, let's
prepare t5515.
In addition to adjusting the references to the branch name itself, this
also requires two commit hashes to be adjusted (actually four, as there
is a SHA-1 _and_ a SHA-256 of both).
That trick was performed by running
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515-*.sh
These commit hashes have been determined manually, of course, by running
the test after adjusting only the branch names, and then copying the
hashes from the log of the failed run.
Note: this patch only touches the t5515 script so far, not the
supporting material in t/t5515/. The resulting patch would have weighed
over 100kB and therefore the Git mailing list would have dropped it. The
files in t/t5515/ will be adjusted in the next two commits. As t5515
would fail without these adjustments, we temporarily skip it via the
`PREPARE_FOR_MAIN_BRANCH` prereq.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the testsuite to run where it treats requests for "recursive" or
the default merge algorithm via consulting the environment variable
GIT_TEST_MERGE_ALGORITHM which is expected to either be "recursive" (the
old traditional algorithm) or "ort" (the new algorithm).
Also, allow folks to pick the new algorithm via config setting. It
turns out builtin/merge.c already had a way to allow users to specify a
different default merge algorithm: pull.twohead. Rather odd
configuration name (especially to be in the 'pull' namespace rather than
'merge') but it's there. Add that same configuration to rebase,
cherry-pick, and revert.
This required updating the various callsites that called merge_trees()
or merge_recursive() to conditionally call the new API, so this serves
as another demonstration of what the new API looks and feels like.
There are almost certainly some callsites that have not yet been
modified to work with the new merge algorithm, but this represents the
ones that I have been testing with thus far.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust tests so that they won't scream when the default initial
branch name is changed to 'main'.
* js/default-branch-name-part-4-minus-1:
t1400: prepare for `main` being default branch name
tests: prepare aligned mentions of the default branch name
t9902: prepare a test for the upcoming default branch name
t3200: prepare for `main` being shorter than `master`
t5703: adjust a test case for the upcoming default branch name
t6200: adjust suppression pattern to also match "main"
tests: start moving to a different default main branch name
t9801: use `--` in preparation for default branch rename
fmt-merge-msg: also suppress "into main" by default
"git diff" family of commands learned the "-I<regex>" option to
ignore hunks whose changed lines all match the given pattern.
* mk/diff-ignore-regex:
diff: add -I<regex> that ignores matching changes
merge-base, xdiff: zero out xpparam_t structures
"git apply -R" did not handle patches that touch the same path
twice correctly, which has been corrected. This is most relevant
in a patch that changes a path from a regular file to a symbolic
link (and vice versa).
* jt/apply-reverse-twice:
apply: when -R, also reverse list of sections
"git rebase --rebase-merges" did not correctly pass --gpg-sign
command line option to underlying "git merge" when replaying a merge
using non-default merge strategy or when replaying an octopus merge
(because replaying a two-head merge with the default strategy was
done in a separate codepath, the problem did not trigger for most
users), which has been corrected.
* sc/sequencer-gpg-octopus:
t3435: add tests for rebase -r GPG signing
sequencer: pass explicit --no-gpg-sign to merge
sequencer: fix gpg option passed to merge subcommand
Our test scripts can be told to run only individual pieces while
skipping others with the "--run=..." option; they were taught to
take a substring of test title, in addition to numbers, to name the
test pieces to run.
* en/test-selector:
test-lib: reduce verbosity of skipped tests
t6006, t6012: adjust tests to use 'setup' instead of synonyms
test-lib: allow selecting tests by substring/glob with --run
Add a sample 'push-to-checkout' hook, that performs the same as
what the built-in default action does.
* as/sample-push-to-checkout-hook:
hook: add sample template for push-to-checkout
"git credential' didn't honor the core.askPass configuration
variable (among other things), which has been corrected.
* tk/credential-config:
credential: load default config
Document that the meaning of a Signed-off-by trailer can vary from
project to project in the end-user documentation, and clarify what
it means to this project.
* bk/sob-dco:
Documentation: stylistically normalize references to Signed-off-by:
SubmittingPatches: clarify DCO is our --signoff rule
Documentation: clarify and expand description of --signoff
doc: preparatory clean-up of description on the sign-off option
Test-coverage enhancement of running commit-graph task "git
maintenance" as needed led to discovery and fix of a bug.
* ds/maintenance-commit-graph-auto-fix:
maintenance: core.commitGraph=false prevents writes
maintenance: test commit-graph auto condition
When "git commit-graph" detects the same commit recorded more than
once while it is merging the layers, it used to die. The code now
ignores all but one of them and continues.
* ds/commit-graph-merging-fix:
commit-graph: don't write commit-graph when disabled
commit-graph: ignore duplicates when merging layers
A test helper "test_cmp A B" was taught to diagnose missing files A
or B as a bug in test, but some tests legitimately wanted to notice
a failure to even create file B as an error, in addition to leaving
the expected result in it, and were misdiagnosed as a bug. This
has been corrected.
* es/test-cmp-typocatcher:
Revert "test_cmp: diagnose incorrect arguments"
"git fast-import" wasted a lot of memory when many marks were in use.
* jk/fast-import-marks-alloc-fix:
fast-import: fix over-allocation of marks storage
The side-band status report can be sent at the same time as the
primary payload multiplexed, but the demultiplexer on the receiving
end incorrectly split a single status report into two, which has
been corrected.
* js/avoid-split-sideband-message:
test-pkt-line: drop colon from sideband identity
sideband: report unhandled incomplete sideband messages as bugs
sideband: avoid reporting incomplete sideband messages
Add strmap as a new struct and associated utility functions,
specifically for hashmaps that map strings to some value. The API is
taken directly from Peff's proposal at
https://lore.kernel.org/git/20180906191203.GA26184@sigill.intra.peff.net/
Note that similar string-list, I have a strdup_strings setting.
However, unlike string-list, strmap_init() does not take a parameter for
this setting and instead automatically sets it to 1; callers who want to
control this detail need to instead call strmap_init_with_options().
(Future patches will add additional parameters to
strmap_init_with_options()).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-ort is a heavy user of strmaps, which are built on hashmap.[ch].
clear_or_reinit_internal_opts() in merge-ort was taking about 12% of
overall runtime in my testcase involving rebasing 35 patches of
linux.git across a big rename. clear_or_reinit_internal_opts() was
calling hashmap_free() followed by hashmap_init(), meaning that not only
was it freeing all the memory associated with each of the strmaps just
to immediately allocate a new array again, it was allocating a new array
that was likely smaller than needed (thus resulting in later need to
rehash things). The ending size of the map table on the previous commit
was likely almost perfectly sized for the next commit we wanted to pick,
and not dropping and reallocating the table immediately is a win.
Add some new API to hashmap to clear a hashmap of entries without
freeing map->table (and instead only zeroing it out like alloc_table()
would do, along with zeroing the count of items in the table and the
shrink_at field).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, once map->table had been freed, any calls to hashmap_put(),
hashmap_get(), or hashmap_remove() would cause a NULL pointer
dereference (since hashmap_free_() also zeros the memory; without that
zeroing, calling these functions would cause a use-after-free problem).
Modify these functions to check for a NULL table and automatically
allocate as needed.
Also add a HASHMAP_INIT(fn, data) macro for initializing hashmaps on the
stack without calling hashmap_init().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable 'option' is used in __git_ps1_show_upstream()
without being localized.
This clobbers the variable the user may be using for other
purposes, which is bad. Luckily, $option is not used to carry
information around in the script as a global variable. The use
of it in this script has very limited scope (namely, only inside
this function), so just declare that it is "local".
Signed-off-by: Sibo Dong <sibo.dong@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The penultimate commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_blame_bloom_data'. Since 'cmd_blame' is the only caller
of 'setup_blame_bloom_data', it is now unnecessary for
'setup_blame_bloom_data' to receive 'path' as a separate argument, as
'sb.path' is already initialized.
Remove this argument from setup_blame_bloom_data's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_scoreboard'. Since 'cmd_blame' is the only caller of
'setup_scoreboard', it is now unnecessary for 'setup_scoreboard' to
receive 'path' as a separate argument, as 'sb.path' is already
initialized.
Remove this argument from setup_scoreboard's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In blame.c::cmd_blame, we send the 'path' field of the 'sb' 'struct
blame_scoreboard' as the 'path' argument to
'line-range.c::parse_range_arg', but 'sb.path' is not set yet; it's set
to the local variable 'path' a few lines later at line 1137.
This 'path' argument is only used in 'parse_range_arg' if we are blaming
a funcname, i.e. `git blame -L :<funcname> <path>`, and in that case it
is sent to 'parse_range_funcname', where it is used to determine if a
userdiff driver should be used for said <path> to match the given
funcname.
Since 'path' is yet unset, the userdiff driver is never used, so we fall
back to the default funcname regex, which is usually not appropriate for
paths that are set to use a specific userdiff driver, and thus either we
match some unrelated lines, or we die with
fatal: -L parameter '<funcname>' starting at line 1: no match
This has been the case ever since `git blame` learned to blame a
funcname in 13b8f68c1f (log -L: :pattern:file syntax to find by
funcname, 2013-03-28).
Enable funcname blaming for paths using specific userdiff drivers by
initializing 'sb.path' earlier in 'cmd_blame', when some of its other
fields are initialized, so that it is set when passed to
'parse_range_arg'.
Add a regression test in 'annotate-tests.sh', which is sourced in
t8001-annotate.sh and t8002-blame.sh, leveraging an existing file used
to test the userdiff patterns in t4018-diff-funcname.
Also, use 'sb.path' instead of 'path' when constructing the error
message at line 1114, for consistency.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git blame -h' and 'git log -h' both show '-L <n,m>' and describe this
option as "Process only line range n,m, counting from 1". No hint is
given that a function name regex can also be used.
Use <range> instead, and expand the description of the option to mention
both modes. Remove "counting from 1" as it's uneeded; it's uncommon to
refer to the first line of a file as "line 0".
Also, for 'git log', improve the wording to better reflect the long help.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several Git commands can make use of the builtin userdiff patterns, but
it's not obvious in the documentation. Add pointers to the 'Defining a
custom hunk header' part of gitattributes(5) in the description of the
following options:
- the '--function-context' option of `git diff` and friends
- the '--function-context' option of `git grep`
- the '-L :<funcname>' option of `git log`, `gitk` and `git blame`
In 'git-grep.txt', take the opportunity to use backticks in the
description of '--show-function', and improve the wording of the
desription of '--function-context'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clearer that a function can be blamed by feeding `git blame`
'-L :<funcname>' by mentioning it at the beginnning of the description
of the '-L' option.
Also, in 'line-range-options.txt', which is used for git-log(1) and
gitk(1), do not parenthesize the mention of the ':<funcname>' mode, to
place it on equal footing with the '<start>,<end>' mode.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the formatting of the description of the line-range option '-L'
for `git log`, `gitk` and `git blame`:
- Use bold for <start>, <end> and <funcname>
- Use backticks for literals
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the '-L' option for `git log` and `gitk` is almost
the same, but is repeated in both 'git-log.txt' and 'gitk.txt' (the
difference being that 'git-log.txt' lists the option with a space
after '-L', while 'gitk.txt' lists it as stuck and notes that `gitk`
only understands the stuck form).
Reduce duplication by creating a new file, 'line-range-options.txt',
and include it in both files.
To simplify the presentation, only list the stuck form for both
commands, and remove the note about `gitk` only understanding the stuck
form.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hashwrite() already buffers writes, so pass the fanout table entries
individually via hashwrite_be32(), which also does the endianess
conversion for us. This avoids a memory copy, shortens the code and
reduces the number of magic numbers.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling rev-parse to check if the drop subcommand removed the last stash
and treating its failure as confirmation is fragile, as the command can
fail for other reasons, e.g. because the system is out of memory.
Directly check if the reflog is empty instead, which is more robust.
Reported-by: Marek Mrva <mrva@eof-studios.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the trivial search-and-replace performed over the course
of the previous three commits, there is one test in t5411 that depends
on the length of the default branch name.
Adjust it and use `main` as the default branch name in this test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t/t5411/*
In the previous commit, we adjusted roughly half of the support files,
to stay under the 100kB limit (mails larger than that are rejected by
the Git mailing list).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t/t5411/test-00[3-5]*
We do not convert the files in `t/t5411/` in one go because the patch
would be too big (mails larger than 100kB are rejected by the Git
mailing list). Instead, we start with roughly half of the support files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
