parse_feature_value() takes an offset, and uses it to seek past the
point in features_list that we've already seen. However if the feature
being searched for does not specify a value, the offset is not
updated. Therefore if we call parse_feature_value() in a loop on a
value-less feature, we'll keep on parsing the same feature over and over
again. This usually isn't an issue: there's no point in using
next_server_feature_value() to search for repeated instances of the same
capability unless that capability typically specifies a value - but a
broken server could send a response that omits the value for a feature
even when we are expecting a value.
Therefore we add an offset update calculation for the no-value case,
which helps ensure that loops using next_server_feature_value() will
always terminate.
next_server_feature_value(), and the offset calculation, were first
added in 2.28 in 2c6a403d96 (connect: add function to parse multiple
v1 capability values, 2020-05-25).
Thanks to Peff for authoring the test.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here, GCC warns about every use of the INIT_PROC_ADDR macro, for example:
In file included from compat/mingw.c:8:
compat/mingw.c: In function 'mingw_strftime':
compat/win32/lazyload.h:38:12: warning: assignment to
'size_t (*)(char *, size_t, const char *, const struct tm *)'
{aka 'long long unsigned int (*)(char *, long long unsigned int,
const char *, const struct tm *)'} from incompatible pointer type
'FARPROC' {aka 'long long int (*)()'} [-Wincompatible-pointer-types]
38 | (function = get_proc_addr(&proc_addr_##function))
| ^
compat/mingw.c:1014:6: note: in expansion of macro 'INIT_PROC_ADDR'
1014 | if (INIT_PROC_ADDR(strftime))
| ^~~~~~~~~~~~~~
(message wrapped for convenience). Insert a cast to keep the compiler
happy. A cast is fine in these cases because they are generic function
pointer values that have been looked up in a DLL.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unusable entries of a damaged pack file are recorded in the oidset
bad_objects. Release it when we're done with the pack.
This doesn't affect intact packs because an empty oidset requires
no allocation.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
54fd3243da ("rebase -i: reread the todo list if `exec` touched it",
2017-04-26) sought to reread the todo list after running an exec
command only if it had been changed. To accomplish this it checks the
stat data of the todo list after running an exec command to see if it
has changed. Unfortunately there are two problems, firstly the
implementation is buggy we actually reread the list after each exec
which is quadratic in the number of commit lookups and secondly the
design is predicated on using nanosecond time stamps which are not the
default.
The implementation bug stems from the fact that we write a new todo
list to disk before running each command but do not update the stat
data to reflect this[1].
The design problem is that it is possible for the user to edit the
todo list without changing its size or inode which means we have to
rely on the mtime to tell us if it has changed. Unfortunately unless
git is built with USE_NSEC it is possible for the original and edited
list to share the same mtime.
Ideally "git rebase --edit-todo" would set a flag that we would then
check in sequencer.c. Unfortunately this is approach will not work as
there are scripts in the wild that write to the todo list directly
without running "git rebase --edit-todo". Instead of relying on stat
data this patch simply reads the possibly edited todo list and
compares it to the original with memcmp(). This is much faster than
reparsing the todo list each time. This patch reduces the time to run
git rebase -r -xtrue v2.32.0~100 v2.32.0
which runs 419 exec commands by 6.6%. For comparison fixing the
implementation bug in stat based approach reduces the time by a
further 1.4% and is indistinguishable from never rereading the todo
list.
[1] https://lore.kernel.org/git/20191125131833.GD23183@szeder.dev/
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is heavily indented and obscures the high level logic within
the loop. Let's move it to its own function before modifying it in the
next commit. Note that there is a subtle change in behavior if the
todo list cannot be reread. Previously todo_list->current was
incremented before returning, now it returns immediately.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MIDX files are used by default since commit 18e449f86b
(midx: enable core.multiPackIndex by default, 2020-09-25)
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 73c3253d75 (bundle: framework for options before bundle file,
2019-11-10) the "git bundle" command was refactored to use
parse_options(). In that refactoring it started understanding the
"--verbose" flag before the subcommand, e.g.:
git bundle --verbose verify --quiet
However, nothing ever did anything with this "verbose" variable, and
the change wasn't documented. It appears to have been something that
escaped the lab, and wasn't flagged by reviewers at the time. Let's
just remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error in "git help no-such-git-command" is handled better.
* ma/help-w-check-for-requested-page:
help: make sure local html page exists before calling external processes
Adjust credential-cache helper to Windows.
* cb/unix-sockets-with-windows:
git-compat-util: include declaration for unix sockets in windows
credential-cache: check for windows specific errors
t0301: fixes for windows compatibility
An oddball OPTION_ARGUMENT feature has been removed from the
parse-options API.
* ab/retire-option-argument:
parse-options API: remove OPTION_ARGUMENT feature
difftool: use run_command() API in run_file_diff()
difftool: prepare "diff" cmdline in cmd_difftool()
difftool: prepare "struct child_process" in cmd_difftool()
Rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--bisect-next-check` subcommand
bisect--helper: reimplement `bisect_run` shell function in C
bisect--helper: reimplement `bisect_visualize()` shell function in C
run-command: make `exists_in_PATH()` non-static
t6030-bisect-porcelain: add test for bisect visualize
t6030-bisect-porcelain: add tests to control bisect run exit cases
Conditional compilation around versions of libcURL has been
straightened out.
* ab/http-drop-old-curl-plus:
http: don't hardcode the value of CURL_SOCKOPT_OK
http: centralize the accounting of libcurl dependencies
http: correct curl version check for CURLOPT_PINNEDPUBLICKEY
http: correct version check for CURL_HTTP_VERSION_2
http: drop support for curl < 7.18.0 (again)
Makefile: drop support for curl < 7.9.8 (again)
INSTALL: mention that we need libcurl 7.19.4 or newer to build
INSTALL: reword and copy-edit the "libcurl" section
INSTALL: don't mention the "curl" executable at all
Taking advantage of the CGI interface, http-backend has been
updated to enable protocol v2 automatically when the other side
asks for it.
* jk/http-server-protocol-versions:
docs/protocol-v2: point readers transport config discussion
docs/git: discuss server-side config for GIT_PROTOCOL
docs/http-backend: mention v2 protocol
http-backend: handle HTTP_GIT_PROTOCOL CGI variable
t5551: test v2-to-v0 http protocol fallback
Replace a handcrafted data structure used to keep track of bad
objects in the packfile API by an oidset.
* rs/packfile-bad-object-list-in-oidset:
packfile: use oidset for bad objects
packfile: convert has_packed_and_bad() to object_id
packfile: convert mark_bad_packed_object() to object_id
midx: inline nth_midxed_pack_entry()
oidset: make oidset_size() an inline function
When "git am --abort" fails to abort correctly, it still exited
with exit status of 0, which has been corrected.
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
"git update-ref --stdin" failed to flush its output as needed,
which potentially led the conversation to a deadlock.
* ps/update-ref-batch-flush:
t1400: avoid SIGPIPE race condition on fifo
update-ref: fix streaming of status updates
While git can be compiled with SANITIZE=leak, we have not run
regression tests under that mode. Memory leaks have only been fixed as
one-offs without structured regression testing.
This change adds CI testing for it. We'll now build and small set of
whitelisted t00*.sh tests under Linux with a new job called
"linux-leaks".
The CI target uses a new GIT_TEST_PASSING_SANITIZE_LEAK=true test
mode. When running in that mode, we'll assert that we were compiled
with SANITIZE=leak. We'll then skip all tests, except those that we've
opted-in by setting "TEST_PASSES_SANITIZE_LEAK=true".
A test setting "TEST_PASSES_SANITIZE_LEAK=true" setting can in turn
make use of the "SANITIZE_LEAK" prerequisite, should they wish to
selectively skip tests even under
"GIT_TEST_PASSING_SANITIZE_LEAK=true". In the preceding commit we
started doing this in "t0004-unwritable.sh" under SANITIZE=leak, now
it'll combine nicely with "GIT_TEST_PASSING_SANITIZE_LEAK=true".
This is how tests that don't set "TEST_PASSES_SANITIZE_LEAK=true" will
be skipped under GIT_TEST_PASSING_SANITIZE_LEAK=true:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0001-init.sh
1..0 # SKIP skip all tests in t0001 under SANITIZE=leak, TEST_PASSES_SANITIZE_LEAK not set
The intent is to add more TEST_PASSES_SANITIZE_LEAK=true annotations
as follow-up change, but let's start small to begin with.
In ci/run-build-and-tests.sh we make use of the default "*" case to
run "make test" without any GIT_TEST_* modes. SANITIZE=leak is known
to fail in combination with GIT_TEST_SPLIT_INDEX=true in
t0016-oidmap.sh, and we're likely to have other such failures in
various GIT_TEST_* modes. Let's focus on getting the base tests
passing, we can expand coverage to GIT_TEST_* modes later.
It would also be possible to implement a more lightweight version of
this by only relying on setting "LSAN_OPTIONS". See
<YS9OT/pn5rRK9cGB@coredump.intra.peff.net>[1] and
<YS9ZIDpANfsh7N+S@coredump.intra.peff.net>[2] for a discussion of
that. I've opted for this approach of adding a GIT_TEST_* mode instead
because it's consistent with how we handle other special test modes.
Being able to add a "!SANITIZE_LEAK" prerequisite and calling
"test_done" early if it isn't satisfied also means that we can more
incrementally add regression tests without being forced to fix
widespread and hard-to-fix leaks at the same time.
We have tests that do simple checking of some tool we're interested
in, but later on in the script might be stressing trace2, or common
sources of leaks like "git log" in combination with the tool (e.g. the
commit-graph tests). To be clear having a prerequisite could also be
accomplished by using "LSAN_OPTIONS" directly.
On the topic of "LSAN_OPTIONS": It would be nice to have a mode to
aggregate all failures in our various scripts, see [2] for a start at
doing that which sets "log_path" in "LSAN_OPTIONS". I've punted on
that for now, it can be added later.
As of writing this we've got major regressions between master..seen,
i.e. the t000*.sh tests and more fixed since 31f9acf9ce (Merge branch
'ah/plugleaks', 2021-08-04) have regressed recently.
See the discussion at <87czsv2idy.fsf@evledraar.gmail.com>[3] about
the lack of this sort of test mode, and 0e5bba53af (add UNLEAK
annotation for reducing leak false positives, 2017-09-08) for the
initial addition of SANITIZE=leak.
See also 09595ab381 (Merge branch 'jk/leak-checkers', 2017-09-19),
7782066f67 (Merge branch 'jk/apache-lsan', 2019-05-19) and the recent
936e58851a (Merge branch 'ah/plugleaks', 2021-05-07) for some of the
past history of "one-off" SANITIZE=leak (and more) fixes.
As noted in [5] we can't support this on OSX yet until Clang 14 is
released, at that point we'll probably want to resurrect that
"osx-leaks" job.
1. https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer
2. https://lore.kernel.org/git/YS9OT%2Fpn5rRK9cGB@coredump.intra.peff.net/
3. https://lore.kernel.org/git/87czsv2idy.fsf@evledraar.gmail.com/
4. https://lore.kernel.org/git/YS9ZIDpANfsh7N+S@coredump.intra.peff.net/
5. https://lore.kernel.org/git/20210916035603.76369-1-carenas@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When SANITIZE=leak is specified we'll now add a SANITIZE_LEAK flag to
GIT-BUILD-OPTIONS, this can then be picked up by the test-lib.sh,
which sets a SANITIZE_LEAK prerequisite.
We can then skip specific tests that are known to fail under
SANITIZE=leak, add one such annotation to t0004-unwritable.sh, which
now passes under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The difftool dir-diff mode handles symlinks by replacing them with their
readlink(2) values. This allows diff tools to see changes to symlinks
as if they were regular text diffs with the old and new path values.
This is analogous to what "git diff" displays when symlinks change.
The temporary diff directories that are created initially contain
symlinks because they get checked-out using a temporary index that
retains the original symlinks as checked-in to the repository.
A bug was introduced when difftool was rewritten in C that made
difftool write the readlink(2) contents into the pointed-to file rather
than the symlink itself. The write was going through the symlink and
writing to its target rather than writing to the symlink path itself.
Replace symlinks with raw text files by unlinking the symlink path
before writing the readlink(2) content into them.
When 18ec800512 (difftool: handle modified symlinks in dir-diff mode,
2017-03-15) added handling for modified symlinks this bug got recorded
in the test suite. The tests included the pointed-to symlink target
paths. These paths were being reported because difftool was erroneously
writing to them, but they should have never been reported nor written.
Correct the modified-symlinks test cases by removing the target files
from the expected output.
Add a test to ensure that symlinks are written with the readlink(2)
values and that the target files contain their original content.
Reported-by: Alan Blotz <work@blotz.org>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "COMPUTE_HEADER_DEPENDENCIES" feature added in [1] was extended to
use auto-detection in [2], that "auto" detection has always piped
STDERR to /dev/null, so any failures on compilers that didn't support
these GCC flags would silently fall back to
"COMPUTE_HEADER_DEPENDENCIES=no".
Later when -Wpedantic support was added to DEVOPTS in [3] we started
passing -Wpedantic in combination with -Werror to the compiler
here. Note (to the pedantic): [3] actually passed "-pedantic", but it
and "-Wpedantic" are synonyms.
Turning on -Wpedantic in [3] broke the auto-detection, since this
relies on compiling an empty program. GCC would loudly complain on
STDERR:
/dev/null:1: error: ISO C forbids an empty translation unit
[-Werror=pedantic]
cc1: note: unrecognized command-line option
‘-Wno-pedantic-ms-format’ may have been intended to silence
earlier diagnostics
cc1: all warnings being treated as errors
But as that ended up in the "$(dep_check)" variable due to the "2>&1"
in [2] we didn't see it.
Then when [4] made DEVOPTS=pedantic the default specifying
"DEVELOPER=1" would effectively set "COMPUTE_HEADER_DEPENDENCIES=no".
To fix these issues let's unconditionally pass -Wno-pedantic after
$(ALL_CFLAGS), we might get a -Wpedantic via config.mak.dev after, or
the builder might specify it via CFLAGS. In either case this will undo
current and future problems with -Wpedantic.
I think it would make sense to simply remove the "2>&1", it would mean
that anyone using a non-GCC-like compiler would get warnings under
COMPUTE_HEADER_DEPENDENCIES=auto, e.g on AIX's xlc would emit:
/opt/IBM/xlc/13.1.3/bin/.orig/xlc: 1501-208 (S) command option D is missing a subargument
Non-zero 40 exit with COMPUTE_HEADER_DEPENDENCIES=auto, set it to "yes" or "no" to quiet auto-detect
And on Solaris with SunCC:
cc: Warning: Option -x passed to ld, if ld is invoked, ignored otherwise
cc: refused to overwrite input file by output file: /dev/null
cc: Warning: Option -x passed to ld, if ld is invoked, ignored otherwise
cc: refused to overwrite input file by output file: /dev/null
Non-zero 1 exit with COMPUTE_HEADER_DEPENDENCIES=auto, set it to "yes" or "no" to quiet auto-detect
Both could be quieted by setting COMPUTE_HEADER_DEPENDENCIES=no
explicitly, as suggested, but let's see if this'll fix it without
emitting too much noise at those that aren't using "gcc" or "clang".
1. f2fabbf76e (Teach Makefile to check header dependencies,
2010-01-26)
2. 111ee18c31 (Makefile: Use computed header dependencies if the
compiler supports it, 2011-08-18)
3. 729b3925ed (Makefile: add a DEVOPTS flag to get pedantic
compilation, 2018-07-24)
4. 6a8cbc41ba (developer: enable pedantic by default, 2021-09-03)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When HTTP/2 is in use, we fail to correctly redact "Authorization" (and
other) headers in our GIT_TRACE_CURL output.
We get the headers in our CURLOPT_DEBUGFUNCTION callback, curl_trace().
It passes them along to curl_dump_header(), which in turn checks
redact_sensitive_header(). We see the headers as a text buffer like:
Host: ...
Authorization: Basic ...
After breaking it into lines, we match each header using skip_prefix().
This is case-sensitive, even though HTTP headers are case-insensitive.
This has worked reliably in the past because these headers are generated
by curl itself, which is predictable in what it sends.
But when HTTP/2 is in use, instead we get a lower-case "authorization:"
header, and we fail to match it. The fix is simple: we should match with
skip_iprefix().
Testing is more complicated, though. We do have a test for the redacting
feature, but we don't hit the problem case because our test Apache setup
does not understand HTTP/2. You can reproduce the issue by applying this
on top of the test change in this patch:
diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf
index afa91e38b0..19267c7107 100644
--- a/t/lib-httpd/apache.conf
+++ b/t/lib-httpd/apache.conf
@@ -29,6 +29,9 @@ ErrorLog error.log
LoadModule setenvif_module modules/mod_setenvif.so
</IfModule>
+LoadModule http2_module modules/mod_http2.so
+Protocols h2c
+
<IfVersion < 2.4>
LockFile accept.lock
</IfVersion>
@@ -64,8 +67,8 @@ LockFile accept.lock
<IfModule !mod_access_compat.c>
LoadModule access_compat_module modules/mod_access_compat.so
</IfModule>
-<IfModule !mod_mpm_prefork.c>
- LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
+<IfModule !mod_mpm_event.c>
+ LoadModule mpm_event_module modules/mod_mpm_event.so
</IfModule>
<IfModule !mod_unixd.c>
LoadModule unixd_module modules/mod_unixd.so
diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh
index 1c2a444ae7..ff74f0ae8a 100755
--- a/t/t5551-http-fetch-smart.sh
+++ b/t/t5551-http-fetch-smart.sh
@@ -24,6 +24,10 @@ test_expect_success 'create http-accessible bare repository' '
git push public main:main
'
+test_expect_success 'prefer http/2' '
+ git config --global http.version HTTP/2
+'
+
setup_askpass_helper
test_expect_success 'clone http repository' '
but this has a few issues:
- it's not necessarily portable. The http2 apache module might not be
available on all systems. Further, the http2 module isn't compatible
with the prefork mpm, so we have to switch to something else. But we
don't necessarily know what's available. It would be nice if we
could have conditional config, but IfModule only tells us if a
module is already loaded, not whether it is available at all.
This might be a non-issue. The http tests are already optional, and
modern-enough systems may just have both of these. But...
- if we do this, then we'd no longer be testing HTTP/1.1 at all. I'm
not sure how much that matters since it's all handled by curl under
the hood, but I'd worry that some detail leaks through. We'd
probably want two scripts running similar tests, one with HTTP/2 and
one with HTTP/1.1.
- speaking of which, a later test fails with the patch above! The
problem is that it is making sure we used a chunked
transfer-encoding by looking for that header in the trace. But
HTTP/2 doesn't support that, as it has its own streaming mechanisms
(the overall operation works fine; we just don't see the header in
the trace).
Furthermore, even with the changes above, this test still does not
detect the current failure, because we see _both_ HTTP/1.1 and HTTP/2
requests, which confuse it. Quoting only the interesting bits from the
resulting trace file, we first see:
=> Send header: GET /auth/smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1
=> Send header: Connection: Upgrade, HTTP2-Settings
=> Send header: Upgrade: h2c
=> Send header: HTTP2-Settings: AAMAAABkAAQCAAAAAAIAAAAA
<= Recv header: HTTP/1.1 401 Unauthorized
<= Recv header: Date: Wed, 22 Sep 2021 20:03:32 GMT
<= Recv header: Server: Apache/2.4.49 (Debian)
<= Recv header: WWW-Authenticate: Basic realm="git-auth"
So the client asks for HTTP/2, but Apache does not do the upgrade for
the 401 response. Then the client repeats with credentials:
=> Send header: GET /auth/smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1
=> Send header: Authorization: Basic <redacted>
=> Send header: Connection: Upgrade, HTTP2-Settings
=> Send header: Upgrade: h2c
=> Send header: HTTP2-Settings: AAMAAABkAAQCAAAAAAIAAAAA
<= Recv header: HTTP/1.1 101 Switching Protocols
<= Recv header: Upgrade: h2c
<= Recv header: Connection: Upgrade
<= Recv header: HTTP/2 200
<= Recv header: content-type: application/x-git-upload-pack-advertisement
So the client does properly redact there, because we're speaking
HTTP/1.1, and the server indicates it can do the upgrade. And then the
client will make further requests using HTTP/2:
=> Send header: POST /auth/smart/repo.git/git-upload-pack HTTP/2
=> Send header: authorization: Basic dXNlckBob3N0OnBhc3NAaG9zdA==
=> Send header: content-type: application/x-git-upload-pack-request
And there we can see that the credential is _not_ redacted. This part of
the test is what gets confused:
# Ensure that there is no "Basic" followed by a base64 string, but that
# the auth details are redacted
! grep "Authorization: Basic [0-9a-zA-Z+/]" trace &&
grep "Authorization: Basic <redacted>" trace
The first grep does not match the un-redacted HTTP/2 header, because
it insists on an uppercase "A". And the second one does find the
HTTP/1.1 header. So as far as the test is concerned, everything is OK,
but it failed to notice the un-redacted lines.
We can make this test (and the other related ones) more robust by adding
"-i" to grep case-insensitively. This isn't really doing anything for
now, since we're not actually speaking HTTP/2, but it future-proofs the
tests for a day when we do (either we add explicit HTTP/2 test support,
or it's eventually enabled by default by our Apache+curl test setup).
And it doesn't hurt in the meantime for the tests to be more careful.
The change to use "grep -i", coupled with the changes to use HTTP/2
shown above, causes the test to fail with the current code, and pass
after this patch is applied.
And finally, there's one other way to demonstrate the issue (and how I
actually found it originally). Looking at GIT_TRACE_CURL output against
github.com, you'll see the unredacted output, even if you didn't set
http.version. That's because setting it is only necessary for curl to
send the extra headers in its HTTP/1.1 request that say "Hey, I speak
HTTP/2; upgrade if you do, too". But for a production site speaking
https, the server advertises via ALPN, a TLS extension, that it supports
HTTP/2, and the client can immediately start using it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove spaces in `non - zero` and add a space between the diff
format/mode and option parentheses in difftool's usage strings.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "Sending v2" section, readers are directed to create v2 patches
without using --range-diff. However, it is customary to include a
range-diff against the v1 patches as a reviewer aid.
Update the "Sending v2" section to suggest a simple workflow that uses
the --range-diff option. Also include some explanation for -v2 and
--range-diff to help the reader understand the importance.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a logic error in dfea575017 (Makefile: lazily compute header
dependencies, 2010-01-26) where we'd make whether we cleaned the
.depend dirs contingent on the currently configured
COMPUTE_HEADER_DEPENDENCIES value. Before this running e.g.:
make COMPUTE_HEADER_DEPENDENCIES=yes grep.o
make COMPUTE_HEADER_DEPENDENCIES=no clean
Would leave behind the .depend directory, now it'll be removed.
Normally we'd need to use another variable, but in this case there's
no other uses of $(dep_dirs), as opposed to $(dep_args) which is used
as an argument to $(CC). So just deleting this line makes everything
work correctly.
See http://lore.kernel.org/git/xmqqmto48ufz.fsf@gitster.g for a report
about this issue.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_TEST_INSTALLED was moved from perf-lib.sh to run in df0f5021
(perf-lib.sh: remove GIT_TEST_INSTALLED from perf-lib.sh, 2019-05-07)
and that included a change to how it inspected the existence of a
bin-wrappers directory. However, that included a typo that made the
match of bin-wrappers never work. Specifically, the assignment was
mydir_abs_wrappers="$mydir_abs_wrappers/bin-wrappers"
which uses the same variable before it is initialized. By changing it to
mydir_abs_wrappers="$mydir_abs/bin-wrappers"
We can correctly use the bin-wrappers directory.
This is critical to successfully computing performance of commands that
execute subcommands. The bin-wrappers ensure that the --exec-path is set
correctly.
Reported-by: Victoria Dye <vdye@github.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the bitfield added in 58300f4743 (sparse-index: add
index.sparse config option, 2021-03-30) and 3964fc2aae (sparse-index:
add guard to ensure full index, 2021-03-30) to just use an "int"
boolean instead.
It might be smart to optimize the space here in the future, but by
consistently using an "int" we can take its address and pass it to
repo_cfg_bool(), and therefore don't need to handle "sparse_index" as
a special-case when reading the "index.sparse" setting.
There's no corresponding config for "command_requires_full_index", but
let's change it too for consistency and to prevent future bugs
creeping in due to one of these being "unsigned".
Using "int" consistently also prevents subtle bugs or undesired
control flow creeping in here. Before the preceding commit the
initialization of "command_requires_full_index" in
prepare_repo_settings() did nothing, i.e. this:
r->settings.command_requires_full_index = 1
Was redundant to the earlier memset() to -1. Likewise for
"sparse_index" added in 58300f4743 (sparse-index: add index.sparse
config option, 2021-03-30) the code and comment added there was
misleading, we weren't initializing it to off, but re-initializing it
from "1" to "0", and then finally checking the config, and perhaps
setting it to "1" again. I.e. we could have applied this patch before
the preceding commit:
+ assert(r->settings.command_requires_full_index == 1);
r->settings.command_requires_full_index = 1;
/*
* Initialize this as off.
*/
+ assert(r->settings.sparse_index == 1);
r->settings.sparse_index = 0;
if (!repo_config_get_bool(r, "index.sparse", &value) && value)
r->settings.sparse_index = 1;
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e753 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09 (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09 (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb65999 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change tweak_untracked_cache() in "read-cache.c" to use a switch() to
have the compiler assert that we checked all possible values in the
"enum untracked_cache_setting" type, and likewise remove the "default"
case in fetch_negotiator_init() in favor of checking for
"FETCH_NEGOTIATION_UNSET" and "FETCH_NEGOTIATION_NONE".
As will be discussed in a subsequent we'll only ever have either of
these set to FETCH_NEGOTIATION_NONE, FETCH_NEGOTIATION_UNSET and
UNTRACKED_CACHE_UNSET within the prepare_repo_settings() function
itself. In preparation for fixing that code let's add a BUG() here to
mark this as unreachable code.
See ad0fb65999 (repo-settings: parse core.untrackedCache, 2019-08-13)
for when the "unset" and "keep" handling for core.untrackedCache was
consolidated, and aaf633c2ad (repo-settings: create
feature.experimental setting, 2019-08-13) for the addition of the
"default" pattern in "fetch-negotiator.c".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of the global ignore_untracked_cache_config variable added in
dae6c322fa (test-dump-untracked-cache: don't modify the untracked
cache, 2016-01-27) we can make use of the new facility to set config
via environment variables added in d8d77153ea (config: allow
specifying config entries via envvar pairs, 2021-01-12).
It's arguably a bit hacky to use setenv() and getenv() to pass
messages between the same program, but since the test helpers are not
the main intended audience of repo-settings.c I think it's better than
hardcoding the test-only special-case in prepare_repo_settings().
This uses the xsetenv() wrapper added in the preceding commit, if we
don't set these in the environment we'll fail in
t7063-status-untracked-cache.sh, but let's fail earlier anyway if that
were to happen.
This breaks any parent process that's potentially using the
GIT_CONFIG_* and GIT_CONFIG_PARAMETERS mechanism to pass one-shot
config setting down to a git subprocess, but in this case we don't
care about the general case of such potential parents. This process
neither spawns other "git" processes, nor is it interested in other
configuration. We might want to pick up other test modes here, but
those will be passed via GIT_TEST_* environment variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add fatal wrappers for setenv() and unsetenv(). In d7ac12b25d (Add
set_git_dir() function, 2007-08-01) we started checking its return
value, and since 48988c4d0c (set_git_dir: die when setenv() fails,
2018-03-30) we've had set_git_dir_1() die if we couldn't set it.
Let's provide a wrapper for both, this will be useful in many other
places, a subsequent patch will make another use of xsetenv().
The checking of the return value here is over-eager according to
setenv(3) and POSIX. It's documented as returning just -1 or 0, so
perhaps we should be checking -1 explicitly.
Let's just instead die on any non-zero, if our C library is so broken
as to return something else than -1 on error (and perhaps not set
errno?) the worst we'll do is die with a nonsensical errno value, but
we'll want to die in either case.
Let's make these return "void" instead of "int". As far as I can tell
there's no other x*() wrappers that needed to make the decision of
deviating from the signature in the C library, but since their return
value is only used to indicate errors (so we'd die here), we can catch
unreachable code such as
if (xsetenv(...) < 0)
[...];
I think it would be OK skip the NULL check of the "name" here for the
calls to die_errno(). Almost all of our setenv() callers are taking a
constant string hardcoded in the source as the first argument, and for
the rest we can probably assume they've done the NULL check
themselves. Even if they didn't, modern C libraries are forgiving
about it (e.g. glibc formatting it as "(null)"), on those that aren't,
well, we were about to die anyway. But let's include the check anyway
for good measure.
1. https://pubs.opengroup.org/onlinepubs/009604499/functions/setenv.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usage description for -X and -z options use descriptive instead of
imperative mood. Edit it for consistency with other options.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A rebase started with 'git rebase <A> <B>' is conceptually to first
checkout <B> and run 'git rebase <A>' starting from that state. 'git
rebase --abort' in the middle of such a rebase should take us back to
the state we checked out <B>.
This used to work, even when <B> is a tag that points at a commit,
until Git 2.20.0 when the command was reimplemented in C. The command
now complains that the tag object itself cannot be checked out, which
may be technically correct but is not what the user asked to do.
Fix this old regression by using lookup_commit_reference_by_name()
when parsing <B>. The scripted version did not need to peel the tag
because the commands it passed the tag to (e.g 'git reset') peeled the
tag themselves.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
peel_committish() appears to have been copied from the scripted rebase
but it duplicates the functionality of
lookup_commit_reference_by_name() so lets use that instead.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses −1 to signal an error. The builtin rebase converts these to
+1 all over the place using !! (presumably because the in the scripted
version an error was signalled by +1). This is confusing and clutters
the code, we only need to convert the value when the function returns.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our grep_buffer() function takes a non-const buffer, which is confusing:
we don't take ownership of nor write to the buffer.
This mostly comes from the fact that the underlying grep_source struct
in which we store the buffer uses non-const pointer. The memory pointed
to by the struct is sometimes owned by us (for FILE or OID sources), and
sometimes not (for BUF sources).
Let's store it as const, which lets us err on the side of caution (i.e.,
the compiler will warn us if any of our code writes to or tries to free
it).
As a result, we must annotate the one place where we do free it by
casting away the constness. But that's a small price to pay for the
extra safety and clarity elsewhere (and indeed, it already had a comment
explaining why GREP_SOURCE_BUF _didn't_ free it).
And then we can mark grep_buffer() as taking a const buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're grepping in a buffer, we don't need to modify it. So we can
take "const char *" buffers, rather than "char *". This can avoid some
awkward casts in our callers, and make our expectations more clear (we
will not take ownership of the memory, nor will we ever write to it).
These spots don't all necessarily have to be converted at the same time,
but some of them are dependent on others, because we pass
pointers-to-pointers in a few cases. And none of this should change any
behavior, since we're just adding "const" qualifiers (and likewise, the
compiler will let us know if we missed any spots). So it's relatively
low-risk to just do this all at once.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrzej Hunt
Johannes Sixt
René Scharfe
Phillip Wood
Eric Wong
Ævar Arnfjörð Bjarmason
Junio C Hamano
David Aguilar
Jeff King
Bagas Sanjaya
Glen Choo
Derrick Stolee