Some users of the index API have a specific path they are looking for,
but choose to use index_file_exists() to rely on the name-hash hashtable
instead of doing binary search with index_name_pos(). These users only
need to know a yes/no answer, not a position within the cache array.
When the index is sparse, the name-hash hash table does not contain the
full list of paths within sparse directories. It _does_ contain the
directory names for the sparse-directory entries.
Create a helper function, expand_to_path(), for intended use with the
name-hash hashtable functions. The integration with name-hash.c will
follow in a later change.
The solution here is to use ensure_full_index() when we determine that
the requested path is within a sparse directory entry. This will
populate the name-hash hashtable as the index is recomputed from
scratch.
There may be cases where the caller is trying to find an untracked path
that is not in the index but also is not within a sparse directory
entry. We want to minimize the overhead for these requests. If we used
index_name_pos() to find the insertion order of the path, then we could
determine from that position if a sparse-directory exists. (In fact,
just calling index_name_pos() in that case would lead to expanding the
index to a full index.) However, this takes O(log N) time where N is the
number of cache entries.
To keep the performance of this call based mostly on the input string,
use index_file_exists() to look for the ancestors of the path. Using the
heuristic that a sparse directory is likely to have a small number of
parent directories, we start from the bottom and build up. Use a string
buffer to allow mutating the path name to terminate after each slash for
each hashset test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cache-tree extension was previously disabled with sparse indexes.
However, the cache-tree is an important performance feature for commands
like 'git status' and 'git add'. Integrate it with sparse directory
entries.
When writing a sparse index, completely clear and recalculate the cache
tree. By starting from scratch, the only integration necessary is to
check if we hit a sparse directory entry and create a leaf of the
cache-tree that has an entry_count of one and no subtrees.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse index extension is used to signal that index writes should be
in sparse mode. This was only updated using GIT_TEST_SPARSE_INDEX=1.
Add a '--[no-]sparse-index' option to 'git sparse-checkout init' that
specifies if the sparse index should be used. It also updates the index
to use the correct format, either way. Add a warning in the
documentation that the use of a repository extension might reduce
compatibility with third-party tools. 'git sparse-checkout init' already
sets extension.worktreeConfig, which places most sparse-checkout users
outside of the scope of most third-party tools.
Update t1092-sparse-checkout-compatibility.sh to use this CLI instead of
GIT_TEST_SPARSE_INDEX=1.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When enabled, this config option signals that index writes should
attempt to use sparse-directory entries.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A submodule is stored as a "Git link" that actually points to a commit
within a submodule. Submodules are populated or not depending on
submodule configuration, not sparse-checkout. To ensure that the
sparse-index feature integrates correctly with submodules, we should not
collapse a directory if there is a Git link within its range.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have a full index, then we can convert it to a sparse index by
replacing directories outside of the sparse cone with sparse directory
entries. The convert_to_sparse() method does this, when the situation is
appropriate.
For now, we avoid converting the index to a sparse index if:
1. the index is split.
2. the index is already sparse.
3. sparse-checkout is disabled.
4. sparse-checkout does not use cone mode.
Finally, we currently limit the conversion to when the
GIT_TEST_SPARSE_INDEX environment variable is enabled. A mode using Git
config will be added in a later change.
The trickiest thing about this conversion is that we might not be able
to mark a directory as a sparse directory just because it is outside the
sparse cone. There might be unmerged files within that directory, so we
need to look for those. Also, if there is some strange reason why a file
is not marked with CE_SKIP_WORKTREE, then we should give up on
converting that directory. There is still hope that some of its
subdirectories might be able to convert to sparse, so we keep looking
deeper.
The conversion process is assisted by the cache-tree extension. This is
calculated from the full index if it does not already exist. We then
abandon the cache-tree as it no longer applies to the newly-sparse
index. Thus, this cache-tree will be recalculated in every
sparse-full-sparse round-trip until we integrate the cache-tree
extension with the sparse index.
Some Git commands use the index after writing it. For example, 'git add'
will update the index, then write it to disk, then read its entries to
report information. To keep the in-memory index in a full state after
writing, we re-expand it to a full one after the write. This is wasteful
for commands that only write the index and do not read from it again,
but that is only the case until we make those commands "sparse aware."
We can compare the behavior of the sparse-index in
t1092-sparse-checkout-compability.sh by using GIT_TEST_SPARSE_INDEX=1
when operating on the 'sparse-index' repo. We can also compare the two
sparse repos directly, such as comparing their indexes (when expanded to
full in the case of the 'sparse-index' repo). We also verify that the
index is actually populated with sparse directory entries.
The 'checkout and reset (mixed)' test is marked for failure when
comparing a sparse repo to a full repo, but we can compare the two
sparse-checkout cases directly to ensure that we are not changing the
behavior when using a sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will mark an in-memory index_state as having sparse directory entries
with the sparse_index bit. These currently cannot exist, but we will add
a mechanism for collapsing a full index to a sparse one in a later
change. That will happen at write time, so we must first allow parsing
the format before writing it.
Commands or methods that require a full index in order to operate can
call ensure_full_index() to expand that index in-memory. This requires
parsing trees using that index's repository.
Sparse directory entries have a specific 'ce_mode' value. The macro
S_ISSPARSEDIR(ce->ce_mode) can check if a cache_entry 'ce' has this type.
This ce_mode is not possible with the existing index formats, so we don't
also verify all properties of a sparse-directory entry, which are:
1. ce->ce_mode == 0040000
2. ce->flags & CE_SKIP_WORKTREE is true
3. ce->name[ce->namelen - 1] == '/' (ends in dir separator)
4. ce->oid references a tree object.
These are all semi-enforced in ensure_full_index() to some extent. Any
deviation will cause a warning at minimum or a failure in the worst
case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upcoming changes will introduce modifications to the index format that
allow sparse directories. It will be useful to have a mechanism for
converting those sparse index files into full indexes by walking the
tree at those sparse directories. Name this method ensure_full_index()
as it will guarantee that the index is fully expanded.
This method is not implemented yet, and instead we focus on the
scaffolding to declare it and call it at the appropriate time.
Add a 'command_requires_full_index' member to struct repo_settings. This
will be an indicator that we need the index in full mode to do certain
index operations. This starts as being true for every command, then we
will set it to false as some commands integrate with sparse indexes.
If 'command_requires_full_index' is true, then we will immediately
expand a sparse index to a full one upon reading from disk. This
suffices for now, but we will want to add more callers to
ensure_full_index() later.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee